Beagle Board Rev C3 Booting Issue

[Gaurav Pathak]

Hi,
I am using Beagle Board rev c3, i had flashed the NAND using RevC4 image. When I tried to run memory test by issuing the command mtest 0x80000000 0x81000000 0xDEADBEEF 1 to u-boot, nothing happened and board got hanged, so I resetted the board by pressing reset button.
After that when I tried to boot the kernel then following error occoured....
Uncompressing Linux Kernel............
crc error
              --system halted
Can anyone tell what has happened? I think RAM has got damaged!!!

[Maxim Podbereznyy]

RAM got damaged by a wrong SW command? If it was possible guys supporting these boards cut their veins trying to recover all broken stuff :)

2013/12/10 Gaurav Pathak <gauravp...@gmail.com>

--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.

--

LinkedIn - http://www.linkedin.com/in/maximpodbereznyy

Company - http://www.linkedin.com/company/mentorel

Facebook - https://www.facebook.com/mentorel.company

[Gaurav Pathak]

So, Should I send the board using RMA on beagleboard.org ??

You received this message because you are subscribed to a topic in the Google Groups "BeagleBoard" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/beagleboard/bKKeo2GoII0/unsubscribe.
To unsubscribe from this group and all its topics, send an email to beagleboard...@googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.

--

Thanks & Regards
Gaurav Pathak

Contact No: 9028531335