LCD driver

[voip...@gmail.com]

Hi All.

I want to write/test a basic framebuffer  based driver for LCD on Beaglebone black

having an SPI interface.

My question is 

1> which LCD should I order? I think I should order the LCD whose driver already there in the kernel, am I right? but which one.

2> Any TFT or STN LCD, please let me know.  How I go about it, I basically want to 

change some parameters and experiment and test...

I do not have a monitor.

Regards,

Mehul  

[evilwulfie]

I have used this
https://www.buydisplay.com/tft-5-inch-lcd-display-module-controller-board-serial-i2c-ra8875
your mileage may vary

--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/8d35e694-11e4-463c-b1ea-85f050ef1e7co%40googlegroups.com.

[Mehul Shah]

i want SPI interface LCD

You received this message because you are subscribed to a topic in the Google Groups "BeagleBoard" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/beagleboard/VWZs5zxB0nM/unsubscribe.
To unsubscribe from this group and all its topics, send an email to beagleboard...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/90786190-2419-425c-534b-f72dabb2708f%40gmail.com.

[evilwulfie]

read the datasheet, that has SPI  there is already a frame buffer written for it
I have used it

To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAGk2dzrFDgJVrR_gPyFRaK4GkkmeW0OiP33ApPb9eKAG7F0_tw%40mail.gmail.com.

[Mark A. Yoder]

I've used a 2.4" LCD in my class.  Here are details.

--Mark