CAN and LCD

[drstev...@me.com]

I am considering using the Beaglebone Black for a project that requires support for a CAN interface and will also need an LCD display with touch interface. Before purchasing a Beaglebone Black and appropriate capes, I am trying to confirm that there will not be a conflict between the CAN and LCD touch. Does anyone have a similar configuration and, if so, which capes are you using?

[Dennis Lee Bieber]

On Thu, 24 May 2018 09:53:04 -0700 (PDT),
drstev...@me.com declaimed the following:

Well -- don't the pin-mux diagrams show which pins are LCD and which
are CAN?

http://www.ofitselfso.com/BeagleNotes/BeagleboneBlackPinMuxModes.php


--
Wulfraed Dennis Lee Bieber AF6VN
wlf...@ix.netcom.com HTTP://wlfraed.home.netcom.com/

[Steven Case]

The LCD capes will use additional pins to support the touch interface and any other I/O supported by the LCD cape, which is where the potential for conflict arises. So far, I have not been able to locate a CAN cape and an LCD cape that are able to be configured without such a conflict. I’m hoping someone else has been able to locate a combination that is compatible.

> --
> For more options, visit http://beagleboard.org/discuss
> ---
> You received this message because you are subscribed to a topic in the Google Groups "BeagleBoard" group.
> To unsubscribe from this topic, visit https://groups.google.com/d/topic/beagleboard/EDW00yXHxbQ/unsubscribe.
> To unsubscribe from this group and all its topics, send an email to beagleboard...@googlegroups.com.
> To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/3k8egdh7o1t1bsu4a9j8mssi7dgk48tbf3%404ax.com.
> For more options, visit https://groups.google.com/d/optout.