"suspend_pad_conf entry" missing in mounted debugfs directory

[Thomas Walter]

Hello all,

I installed Ubuntu with Kernel 3.2 Image on my Beaglebone following Robert's instructions and use it successful for almost a year now (with peripherals such as an IMU, etc.). Now I want to use the power management on the board (suspend/resume) to wake it up from standby mode via a GPIO pin and followed the description given here, but the mounted debugfs directory “/debugfs/omap_mux/board/” only contains an entry “core”. The entry “suspend_pad_conf” where I can configure the wake-up source is missing. I also got the file “am335x-pm-firmware.bin” and added it to the firmware directory and the kernel config. I also verfified that it gets loaded by checking dmesg:

[    2.338288] Power Management for AM33XX family
[    2.343144] Trying to load am335x-pm-firmware.bin (60 secs timeout)
[    2.349868] Copied the M3 firmware to UMEM

But the entry “suspend_pad_conf” does not show up in the directory. Any idea what I need to do in order to have that entry show up to use the functionality to specifiy the wake-up source(s)?

Thanks a lot in advance for your help on this! I appreciate your feedback!

Best Regards,

Thomas

[Thomas Walter]

Anybody ever used PM on Beaglebone? I appreciate any feedback on this!

Thanks and Regards,
Thomas

--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to a topic in the Google Groups "BeagleBoard" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/beagleboard/9hKMb10Z-hY/unsubscribe.
To unsubscribe from this group and all its topics, send an email to beagleboard...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.