2014-03-04 Debian flasher doesn't flash the eMMC in BBB

[Sam Hon]

I tried to update the latest version Debian in

http://beagleboard.org/latest-images/

Download BeagleBone Black (eMMC flasher) Debian (BeagleBone Black - 2GB eMMC) 2014-03-04 and use Image Writer to write into SD card.

However, when pressing on S2 (boot Switch) and power on,image in SD card isn't flashed into eMMC but BBB boots from it.

How do I do to flash the image into BBB eMMC not boot from it.

Will be a big different between Angostrom and Debian? because I use Angostrom before to control LED on the board, GPIO, UART0 and so on. Those codes remain the same or I have to modify it.

Thanks

[Gerald Coley]

Are you holding S2 pressed until after the board powers up?

Gerald

--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[Sam Hon]

Hi Gerald,

I did hold S2 until after the board powers up. Before I updated Angstrom several times, they were all success. I didn't know where I did wrong.

My PCB is version A5C.

What information should I give to make it clear and easy to debug.

Thanks,

You received this message because you are subscribed to a topic in the Google Groups "BeagleBoard" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/beagleboard/5qcEHCsQvyE/unsubscribe.
To unsubscribe from this group and all its topics, send an email to beagleboard...@googlegroups.com.

[Sam Hon]

After retry several times, I found I can flash the NAND with the latest Debian. Maybe, there is something wrong over there, but I can use it now...

[Robert Nelson]

On Tue, Mar 11, 2014 at 8:00 AM, Sam Hon <samhon...@gmail.com> wrote:
> After retry several times, I found I can flash the NAND with the latest
> Debian. Maybe, there is something wrong over there, but I can use it now...

That's a little odd, as they are the same flashing backend.

Regards,

--
Robert Nelson
http://www.rcn-ee.com/