Error Severe (408): Subscript #1 of the array HRU_KM

[Fabian]

Hi everybody,

Im getting this error when trying to run ArcSwat: 

"forrtl: Severe (408): fort: (11): Subscript #1 of the array HRU_KM has value 0 which is less than the lower bound of 1"

I had previously ran the simulation with no errors, I saved that simulation, then ran a different one and then went back to the first one, copying it to the default to running it again. I did this because I noticed the modified parameters were not being applied because I didnt rewrite input files. I have only changed the general management and scheduled operations parameters, the rest are the default Swat parameters, with which I had no problems in the previous runs. 

I don't even find the parameter HRU_KM in the Input-Output documentation, the project and SWAT databases or the input files.

Can anyone please help me? Any idea is welcome

Fabian

[Katie]

Fabian - 

HRU-Km is the area of an HRU. It is calculated from HRU_FR in the .hru files. You may have inadvertently changed this area when working on the management. I would check the HRU table in your MS project to make sure no areas are 0 or null.

[Fabian Cote]

Hi Katie, 

Thanks for your help. I checked the HRU_FR values in the project database and the input .hru files and found no erroneous values. However I think the problem is somewhere in the configuration of the scheduled operations. I made some changes and now the problem arises when I try to rewrite the mgt files after configuring those operations, the model says there is a not valid value in the SUB 1 HRU 1, and Im looking for the error there.

Thanks a lot,

Fabian

El jue., 4 oct. 2018 a las 10:26, Katie (<katie.m...@gmail.com>) escribió:

Fabian - 

HRU-Km is the area of an HRU. It is calculated from HRU_FR in the .hru files. You may have inadvertently changed this area when working on the management. I would check the HRU table in your MS project to make sure no areas are 0 or null.

--
You received this message because you are subscribed to a topic in the Google Groups "ArcSWAT" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/arcswat/_Zj9YnNnDKg/unsubscribe.
To unsubscribe from this group and all its topics, send an email to arcswat+u...@googlegroups.com.
To post to this group, send email to arc...@googlegroups.com.
Visit this group at https://groups.google.com/group/arcswat.
For more options, visit https://groups.google.com/d/optout.

[Tarun Teja]

Hello Fabian.

I am also facing the same problem currently, Please explain me the type of schedule operations you changed and tell me how you solved the errors.

Thank you,

On Friday, October 5, 2018 at 9:03:22 PM UTC+5:30, Fabian wrote:

Hi Katie, 

Thanks for your help. I checked the HRU_FR values in the project database and the input .hru files and found no erroneous values. However I think the problem is somewhere in the configuration of the scheduled operations. I made some changes and now the problem arises when I try to rewrite the mgt files after configuring those operations, the model says there is a not valid value in the SUB 1 HRU 1, and Im looking for the error there.

Thanks a lot,

Fabian

El jue., 4 oct. 2018 a las 10:26, Katie (<katie....@gmail.com>) escribió:

Fabian - 

HRU-Km is the area of an HRU. It is calculated from HRU_FR in the .hru files. You may have inadvertently changed this area when working on the management. I would check the HRU table in your MS project to make sure no areas are 0 or null.

--
You received this message because you are subscribed to a topic in the Google Groups "ArcSWAT" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/arcswat/_Zj9YnNnDKg/unsubscribe.

To unsubscribe from this group and all its topics, send an email to arc...@googlegroups.com.