Latest built AOSP images are not working on Hikey Board.

[YADLA NIRANJAN]

Latest built AOSP images are not working on Hikey Board.

Followed instructions to make system.img and other images from the link below.
http://source.android.com/source/devices.html

Loaded these system.img ,cache.img and userdata.img generated images
on Hikey board and connected HDMI output from HIkey Board to HDMI
display.
However I could not see any display on HDMI screen.

Please refer the attached logcat.txt and suggest me if I am missing anything.

Thanks,
NY

[Amit Pundir]

AOSP seem to have booted up fine on Hikey. See
"SystemBroadcastReceiver: Boot has been completed" in your logcat.

Did you try connecting hikey to any other HDMI display?

Regards,
Amit Pundir

>
> Thanks,
> NY
>
> --
> --
> You received this message because you are subscribed to the "Android
> Building" mailing list.
> To post to this group, send email to android-...@googlegroups.com
> To unsubscribe from this group, send email to
> android-buildi...@googlegroups.com
> For more options, visit this group at
> http://groups.google.com/group/android-building?hl=en
>
> ---
> You received this message because you are subscribed to the Google Groups
> "Android Building" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to android-buildi...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.

[YADLA NIRANJAN]

Hi ,

Changed GeChic HDMI display to Lilliput HDMI display and now I could see display comes up.

Thanks for your support.!

Thanks ,

Niranjan

On Fri, May 20, 2016 at 12:37 PM, John Stultz <john....@linaro.org> wrote:

On Fri, May 20, 2016 at 10:59 AM, NY <niru...@gmail.com> wrote:
> When I used pre-compiled system.img and other required images on Hikey
> board.
>
> which are shared from the below path.
> https://builds.96boards.org/releases/hikey/linaro/aosp/latest/
>
> I am using below HDMI display and could see android display comes up with
> the pre compiled images(looks like lollipop AOSP version).
>
> http://www.gechic.com/product_help_en.asp?s=10
>
>
> However when I built the latest AOSP code, with generated images.
>
> I have flashed those on Hikey board with same setup above.
>
> And could not see the display is coming up.
>
>
> It may be some issue with the display configuration on latest AOSP built,
> Got this log from logcat not sure it is expecting built in display rather
> than HDMI display?
> DisplayManagerService: Display device added: DisplayDeviceInfo{“Built-in
> Screen”: uniqueId=”local:0″, 1024 x 768, modeId 1, defaultModeId 1,
> supportedModes [{id=1, width=1024, height=768, fps=60.000004}],
> colorTransformId 1, defaultColorTransformId 1,


Can you provide dmesg output from the board? (you can capture this via
"adb shell dmesg")

The HiKey board has some limitations in generating mode clock rates
which drive displays. Some monitors could handle these limitations
better then others, so we've recently tried to limit it to some of the
common known good rates.

Its likely that the monitor you have wants one of the problematic
rates that HiKey has trouble with and possibly doesn't support any of
the known good rates.  But it might be possible that the display
supports rates that HiKey can do, but I wasn't able to validate at the
time.

thanks
-john

[NY]

here is the working hdmi display on HiKey

http://www.amazon.com/Lilliput-Fa1011-np-Touch-Monitor-Input/dp/B0046CBB9C/ref=sr_1_6?ie=UTF8&qid=1463768746&sr=8-6&keywords=lilliput+hdmi++monitor

[NY]

Thanks for your suggestion.!

I have changed GeChic HDMI display to Lilliput HDMI display and now I could see display comesup.

Thanks,

NY

On Wednesday, May 18, 2016 at 10:04:08 PM UTC-7, Amit Pundir wrote:

[NY]

When I used pre-compiled system.img and other required images on Hikey board.

which are shared from the below path.
https://builds.96boards.org/releases/hikey/linaro/aosp/latest/

I am using below HDMI display and could see android display comes up with the pre compiled images(looks like lollipop AOSP version).

http://www.gechic.com/product_help_en.asp?s=10

However when I built the latest AOSP code, with generated images.

I have flashed those on Hikey board with same setup above. 

And could not see the display is coming up.

It may be some issue with the display configuration on latest AOSP built,
Got this log from logcat not sure it is expecting built in display rather than HDMI display?
DisplayManagerService: Display device added: DisplayDeviceInfo{“Built-in Screen”: uniqueId=”local:0″, 1024 x 768, modeId 1, defaultModeId 1, supportedModes [{id=1, width=1024, height=768, fps=60.000004}], colorTransformId 1, defaultColorTransformId 1,

On Wednesday, May 18, 2016 at 10:04:08 PM UTC-7, Amit Pundir wrote: