Help on installing a Balmar ARS 5

[Btbogdan46]

I have an Oceanis 45, 2014 with a Yanmar 4jh5e diesel with the Valeo 120 amp alternator. I just installed the Balmar smart regulator to the alternator and am trying to hook up the Balmar ARS 5 to the engine harness. Thought I had the color coding figured out, but when tested, the alternator is not turning on and charging the battery. The ARS 5 is on and self tests normally.

Who can help me with where to wire what between the alternator to the ARS 5 to the engine harness on a 2014 Yanmar 4JH5E with a Valeo 120 amp alternator.

[Btbogdan46]

Good question for me. I ran the engine for about 5 minutes with the engine rpm at 1500. Battery light and alarm ran the entire time and voltage at the engine panel and inside was 12.7-12.9 v. We started with 13.3 v

[Bill Jarvis]

Sounds like it may be an oil pressure switch/connection problem.

 

Bill

--
Largest Beneteau group, over **1121
** members and growing.
 
To post to this group, send email to Benetea...@googlegroups.com
To unsubscribe from this group, send email to Beneteau-Owne...@googlegroups.com
For more options, visit this group at http://groups.google.com/group/Beneteau-Owners
contact denny.we...@gmail.com, or ume...@comcast.net if you have a list management question
---
You received this message because you are subscribed to the Google Groups "Beneteau Owners" group.
To unsubscribe from this group and stop receiving emails from it, send an email to beneteau-owne...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.