How to receive periodic push notifications about Water Detected until I fix problem with water?

[Maxim KM]

I got moisture sensors for making sure we won't have water flooding at flat(had negative experience of this)

I am afraid that I can miss one unique push notification at night(when sleeping) esp melodies are too short

Please HELP

[Mark Pinther]

Look under kumoapps. There is one called "Send push every x minute from door/window opening until it is closed."
You might have to configure your water sensor to be just like a door/window but just the opposite. Door sensors are normally closed state whereas the water sensors are normally open and when water completes the circuit, it alerts you. My theory is that you would be asking your door to alarm the entire time it was closed and to stop alarming when it was open. Im not explaining it very clearly.

[Zhiheng Cao]

I just created a KumoApp for this, please search "Send push every minute from water detected until tip is cleaned"

Let me know if you encounter any problem using this.

On Sat, Dec 26, 2015 at 10:22 PM, Mark Pinther <mpin...@gmail.com> wrote:

Look under kumoapps.  There is one called "Send push every x minute from door/window opening until it is closed."
You might have to configure your water sensor to be just like a door/window but just the opposite.  Door sensors are normally closed state whereas the water sensors are normally open and when water completes the circuit, it alerts you.  My theory is that you would be asking your door to alarm the entire time it was closed and to stop alarming when it was open.  Im not explaining it very clearly.

--
You received this message because you are subscribed to the Google Groups "Wireless Sensor Tags" group.
To unsubscribe from this group and stop receiving emails from it, send an email to wireless-sensor-...@googlegroups.com.
To post to this group, send email to wireless-s...@googlegroups.com.
Visit this group at https://groups.google.com/group/wireless-sensor-tags.
To view this discussion on the web visit https://groups.google.com/d/msgid/wireless-sensor-tags/a42e6e61-1943-435b-8438-7afa39b20797%40googlegroups.com.

For more options, visit https://groups.google.com/d/optout.

[Bill Jindrich]

Hi All. I'm relatively new to the Wireless Tags and very new to Kumo Apps. Looking at the Kumo Apps under the "Requires Water Sensor" category, I see two apps: 1) "Send push every minute from water detected until tip is cleaned" (the new app just created on Dec 27 and 2) "Send push every X minute from water detected until it is closed" (last updated on May 22).

Other than the new app having a notification every 1 minute and the older app having a configuration for the notification interval, how do these apps differ?

Thanks