NI DAQ system reqs

[dhe...@ucsd.edu]

Hi,

I'm considering switching over from an old version of Scanimage (Sabatini lineage). I noticed the system reqs asks for X series NI DAQ boards, but I use an NI PCIe-6259. Is this a deal breaker? Or is there some workaround?

Thanks,

Danny Heinz

[Taylor, Adam]

Sorry, WaveSurfer does not support M-series boards (62xx). You would
have to purchase an X series board if you wanted to use WaveSurfer.
But FWIW, an X series board is not very expensive relative to
everything else in a typical rig...

Adam

> --
> You received this message because you are subscribed to the Google Groups "WaveSurfer" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to wavesurfer+...@googlegroups.com.
> To post to this group, send email to waves...@googlegroups.com.
> To view this discussion on the web visit https://groups.google.com/d/msgid/wavesurfer/29216802-51f8-4c40-8c22-49e91c87e042%40googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.

[Daniel Heinz]

Hi, I'm finally getting around to setting up Wavesurfer. I have my X series DAQ board, and I found an old BNC-2090 breakout box to use with it, as the Wavesurfer manual suggests. One thing I'm noticing with this box is that it only has two analog output ports, both of which will be used as command ports for my Multiclamp 200B. What would you suggest using to drive analog stimuli for things like an LED or eStim box? Do yo suggest a second DAQ board and a second breakout box? If so, would this second DAQ board need to be X series as well? On our rigs we currently use a PCI-6733 and a BNC-2110 for this. 

Thanks for all your help,

Danny

On Monday, April 1, 2019 at 12:24:26 PM UTC-7, Taylor, Adam wrote:

Sorry, WaveSurfer does not support M-series boards (62xx).  You would
have to purchase an X series board if you wanted to use WaveSurfer.
But FWIW, an X series board is not very expensive relative to
everything else in a typical rig...

Adam

On Mon, Apr 1, 2019 at 2:16 PM <dhe...@ucsd.edu> wrote:
>
> Hi,
> I'm considering switching over from an old version of Scanimage (Sabatini lineage). I noticed the system reqs asks for X series NI DAQ boards, but I use an NI PCIe-6259. Is this a deal breaker? Or is there some workaround?
>
> Thanks,
> Danny Heinz
>
> --
> You received this message because you are subscribed to the Google Groups "WaveSurfer" group.

> To unsubscribe from this group and stop receiving emails from it, send an email to wavesurfer+unsubscribe@googlegroups.com.