Not sure if you're aware, but Scubapro has just released a new dive computer, the Galileo 2 or G2. This computer features wireless bluetooth syncing through the LogTrak IOS/Android apps. Any idea how long it might take to get this computer syncing with Subsurface? I'd certainly offer any assistance I can in testing/troubleshooting, feel free to ask!
To unsubscribe from this group and stop receiving emails from it, send an email to subsurface-divelog+unsub...@googlegroups.com.
I would not buy a G2 for myself, but that's because of 2 things: No trimix support (yet, anyway).
I went through the Settings menu and didn’t see a way to turn on Trimix or set the He part of a mix. But, I certainly could have missed it in the Settings. I was really only looking for a way to set FHe. I was not specifically looking for a setting to enable Trimix.
I said something about it to the dive shop owner who was letting me look at it (and who is a tech diver himself, I believe) and he said they will be releasing updated firmware with Trimix support later. But, he had barely looked at the G2 himself, yet, so his statement may have been based on believing it will support Trimix and my statement that it appeared not to.
If it does already support Trimix, then it would be only the lack of Gradient Factor support that would keep me away from it. Well, that and the price (being more expensive here than a Perdix AI).
--
You received this message because you are subscribed to the Google Groups "Subsurface Divelog" group.
To unsubscribe from this group and stop receiving emails from it, send an email to
subsurface-dive...@googlegroups.com.
To post to this group, send email to
subsurfac...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/subsurface-divelog/CA%2B55aFzjXYSfzNDtkr56%3D5UYmK221PkYr%2ByYNLwmCW9izBKd5A%40mail.gmail.com.
I went through the Settings menu and didn’t see a way to turn on Trimix or set the He part of a mix. But, I certainly could have missed it in the Settings. I was really only looking for a way to set FHe. I was not specifically looking for a setting to enable Trimix
Yeah, PDIS (Profile Dependent Intermediate Stops) is your Deep Stops option (which I would totally avoid).
PMG (Predictive Multi Gas) or something like that, IIRC, is your multi-cylinder support.
It definitely seems like A Good Thing that they have it come out of the box with the options all set to make it simple and easy for normal recreational (i.e. single tank) divers.
Too bad I couldn’t figure out how to get from the Settings menu back to the Main menu in order to check out the other options. Apparently (I’m now told), a long-press on one of the buttons would have gotten me back. But, there was nothing obvious or intuitive about that and I did not figure it out when I was looking at it. I don’t know why they couldn’t just put a “Exit” choice as the last thing in the Settings menu.
From: linu...@gmail.com [mailto:linu...@gmail.com]
On Behalf Of Linus Torvalds
Sent: Friday, June 09, 2017 5:18 PM
To: subsurfac...@googlegroups.com
Subject: RE: Scubapro Galileo 2 (G2)
On Jun 9, 2017 13:55, "Stuart Vernon" <stu...@force2.net> wrote:
--
You received this message because you are subscribed to the Google Groups "Subsurface Divelog" group.
To unsubscribe from this group and stop receiving emails from it, send an email to
subsurface-dive...@googlegroups.com.
To post to this group, send email to
subsurfac...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/subsurface-divelog/CA%2B55aFww5%3DqikjxshVN3Xkrz50L4qvymFiLvmE_3STnRk1W93A%40mail.gmail.com.
Too bad I couldn’t figure out how to get from the Settings menu back to the Main menu in order to check out the other options. Apparently (I’m now told), a long-press on one of the buttons would have gotten me back. But, there was nothing obvious or intuitive about that and I did not figure it out when I was looking at it. I don’t know why they couldn’t just put a “Exit” choice as the last thing in the Settings menu.
Oh, the sidemount feature is new to the G2, I think, and not something
we support. In fact, right now we don't even support showing that
information properly.
Oh, and I'm wondering why it doesn't work at all for Martin.
On Wed, Jun 14, 2017 at 12:48 PM, Ryan January <rjan...@gmail.com> wrote:
>
> I mislead you earlier. Subsurface appears to be ignoring the dives where
> sidemount was enabled in the dive settings menu. No errors were indicated
> in the UI while polling the dive computer or while downloading dives.
> Screenshots are attached.
Ok, fair enough. We clearly have a problem with silently just ignoring
dives that have some issue with them.
I just downloaded the three dives I had today, and sadly (or not) I
see no problems at all.They all downloaded with the right profiles and
for the last one I even had the heartbeat sensor on just to test, and
we even got that right (but subsurface doesn't show it, so you can't
tell it's there unless you look at the save file).
I'll have to add some debug option to figure out what is wrong. The
"doesn't work with sidemount" is obviously one pretty big wrong thing,
but I'll still need to add debug code for it, because I only have one
sensor, so I can't try to fake some sidemount thing with two
cylinders.
But I'll have to sleep on this first, because I'm too tired to write
code right now.
Linus
--
You received this message because you are subscribed to the Google Groups "Subsurface Divelog" group.
To unsubscribe from this group and stop receiving emails from it, send an email to subsurface-divelog+unsub...@googlegroups.com.
To post to this group, send email to subsurface-divelog@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/subsurface-divelog/CA%2B55aFy30n8zKtyB%3DtUhG7MJz0y0Uidh%3DaE-00RsnUVbJbw-Xw%40mail.gmail.com.
--
You received this message because you are subscribed to the Google Groups "Subsurface Divelog" group.
To unsubscribe from this group and stop receiving emails from it, send an email to subsurface-dive...@googlegroups.com.
To post to this group, send email to subsurfac...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/subsurface-divelog/487a9fa8-9996-4ebd-bd59-3aa4f7bd536a%40googlegroups.com.
Not sure if you're aware, but Scubapro has just released a new dive computer, the Galileo 2 or G2. This computer features wireless bluetooth syncing through the LogTrak IOS/Android apps. Any idea how long it might take to get this computer syncing with Subsurface? I'd certainly offer any assistance I can in testing/troubleshooting, feel free to ask!
--
You received this message because you are subscribed to the Google Groups "Subsurface Divelog" group.
To unsubscribe from this group and stop receiving emails from it, send an email to subsurface-dive...@googlegroups.com.
To post to this group, send email to subsurfac...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/subsurface-divelog/4c0f096a-281f-4188-bdbd-f2cc1706e2b3%40googlegroups.com.
Subsurface supports USB Download from the Scubapro G2 - the one problem is that LogTrack registers a driver for the G2 with Windows that Subsurface doesn't work with.So you need to switch the driver that is installed - you can do this with the Zadig tool http://zadig.akeo.ie/downloads/zadig_2.1.0.exe - if you switch the driver to WinUSB then the current test build of Subsurface will happily download from your G2.BTW: it's Subsurface, no CamelCase. And these are 'test' builds, not beta versions, as the download location (download/test) clearly indicates. And right now the Windows build in that area has quite a few problems in other areas since we are changing the build environment around.../D
On Jul 30, 2017, at 5:24 AM, Albe G <tur...@gmail.com> wrote:
Tried newest "beta" version of SubSurface on Win10_x64 with USB cable. No luck at all.I had similar problem with Diving Log and the author sent me a updated libdive (+2 other files). No idea if the newer SubSurface version you are forging is BT specific or USB too.
Il giorno venerdì 2 giugno 2017 23:55:23 UTC+2, CZS ha scritto:Not sure if you're aware, but Scubapro has just released a new dive computer, the Galileo 2 or G2. This computer features wireless bluetooth syncing through the LogTrak IOS/Android apps. Any idea how long it might take to get this computer syncing with Subsurface? I'd certainly offer any assistance I can in testing/troubleshooting, feel free to ask!--
You received this message because you are subscribed to the Google Groups "Subsurface Divelog" group.
To unsubscribe from this group and stop receiving emails from it, send an email to subsurface-divelog+unsub...@googlegroups.com.
Subsurface supports USB Download from the Scubapro G2 - the one problem is that LogTrack registers a driver for the G2 with Windows that Subsurface doesn't work with.So you need to switch the driver that is installed - you can do this with the Zadig tool http://zadig.akeo.ie/downloads/zadig_2.1.0.exe - if you switch the driver to WinUSB then the current test build of Subsurface will happily download from your G2.BTW: it's Subsurface, no CamelCase. And these are 'test' builds, not beta versions, as the download location (download/test) clearly indicates. And right now the Windows build in that area has quite a few problems in other areas since we are changing the build environment around.../D
On Jul 30, 2017, at 5:24 AM, Albe G <tur...@gmail.com> wrote:
Tried newest "beta" version of SubSurface on Win10_x64 with USB cable. No luck at all.I had similar problem with Diving Log and the author sent me a updated libdive (+2 other files). No idea if the newer SubSurface version you are forging is BT specific or USB too.
Il giorno venerdì 2 giugno 2017 23:55:23 UTC+2, CZS ha scritto:Not sure if you're aware, but Scubapro has just released a new dive computer, the Galileo 2 or G2. This computer features wireless bluetooth syncing through the LogTrak IOS/Android apps. Any idea how long it might take to get this computer syncing with Subsurface? I'd certainly offer any assistance I can in testing/troubleshooting, feel free to ask!--
You received this message because you are subscribed to the Google Groups "Subsurface Divelog" group.
To unsubscribe from this group and stop receiving emails from it, send an email to subsurface-divelog+unsub...@googlegroups.com.
Ok, after a couple of try, I get this:
Attached log and bin files
I had Error parsing header error and no diving imported.
--
You received this message because you are subscribed to a topic in the Google Groups "Subsurface Divelog" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/subsurface-divelog/VPJhVIEBesc/unsubscribe.
To unsubscribe from this group and all its topics, send an email to subsurface-divelog+unsubscribe@googlegroups.com.
To post to this group, send email to subsurface-divelog@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/subsurface-divelog/70daf4096184b0ffc05fe691aec40b4e%40libdivecomputer.org.
--
You received this message because you are subscribed to the Google Groups "Subsurface Divelog" group.
To unsubscribe from this group and stop receiving emails from it, send an email to subsurface-dive...@googlegroups.com.
To post to this group, send email to subsurfac...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/subsurface-divelog/5f989380-bc15-4d2b-a228-dd23e3416f5f%40googlegroups.com.