Any ideas on if it's possible to get it into a window?
I don't see any options in qvm-prefs.
Thanks,
Mark
boot in debug mode, then go into safe mode.
Disable Qubes Video in system, but enable Standard Video.
Then reboot the VM.
To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/6039b140-42fd-4c4b-9b6b-ba50d6aaa517%40googlegroups.com.
--
You received this message because you are subscribed to the Google Groups "qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscribe@googlegroups.com.
To post to this group, send email to qubes...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
I was however working on a little program to fix the whole issue at one point, I may finish that and upload that for people to use in the systems to avoid this issue of resolutions and more regarding the device.
It's simply just enabling and disabling the video devices to switch between the two.
The standard windows adaptive state works fine like it, but I never got it to release versions. Because Windows tools broke things and I had way too much work to do to finish it up.
If I get it working properly, it would make everything a lot easier for all those that have this issue.
The only issue with it is that it would require the tools to be installed (QREXEC ) to be specific. Unless you would preferr a serial connection from Dom0 to generate and connect to perform the action? If that would be preferred, let me know and I'll build that in too. (means it runs from Dom0, instead of the Guest.)