Wiring diagram xtreme

[Michael Aitken]

Hi

Anyone have a wiring diagram for a xtreme with the sierra switch gear? Replace a bad wire from the fuse to reverse light switch unfortunately my main beam is not working. Side and dip is working fine.

Thanks

[Nigel Plant]

I have one, but not here. Should be able to get it tomorrow and send you a pdf. Note mine will be for a Zetec but will be the same for the dash switchgear and non engine bits. If someone gets one first no worries.
Nigel

[Michael Aitken]

That would be great hopping I just have bad connection somewhere.

[Jim Hearne]

Not a wiring diagram but the Xtreme manual seems to have a lot of details on
the wiring.
Copy attached.

Jim

--
--
You received this message because you are subscribed to the Google Groups
"Quantum Owners Group" group.
To post to this group, send email to quantu...@googlegroups.com
To unsubscribe from this group, send email to
quantumowner...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/quantumowners?hl=en

IMPORTANT NOTE: All information presented herewith is provided on an "As Is"
basis, without warranty or the implication thereof. Neither the Quantum
Owners Club nor the individuals associated with the Quantum Owners Club or
in the preparation of the above information shall have any liability to any
person or entity with respect to liability, loss, or damage caused or
alleged to be caused directly or indirectly by the instructions contained
within this or related message(s).
---
You received this message because you are subscribed to the Google Groups
"Quantum Owners Group" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to quantumowner...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/quantumowners/bf9691e6-8ea6-4353-9224-1b6da10680f7%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[Nigel Plant]

No worries. Assume you have checked the obvious, like fuse and relay.

[bill]

I hope you can trace and find it easier than my fault on the H4, after having the injection circuit to pieces many times the fault has cleared but an electrical fault developed on the ignition system which left me with no spark, nothing on either fault has been found but everything is up and running, damn gremlins
Bill

Sent from my iPhone

> On 23 May 2019, at 08:42, 'Michael Aitken' via Quantum Owners Group <quantu...@googlegroups.com> wrote:
>
> That would be great hopping I just have bad connection somewhere.
>

> --
> --
> You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group.
> To post to this group, send email to quantu...@googlegroups.com
> To unsubscribe from this group, send email to quantumowner...@googlegroups.com
> For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en
>
> IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s).
> ---
> You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to quantumowner...@googlegroups.com.

> To view this discussion on the web visit https://groups.google.com/d/msgid/quantumowners/076d4f3e-6e2e-4c88-9031-1738183e7d94%40googlegroups.com.

[Mark Olsen]

If there is a wiring diagram for the Xtreme it would be handy to have a copy too please.  I've also got some gremlins in my wiring that I need to track down, the diagrams in the build manual are a good starting point but propper set of diagram to work from would be nice.

Cheers

Mark

To view this discussion on the web visit https://groups.google.com/d/msgid/quantumowners/DB7PR06MB59603F3AA6F6C577D28A9A3AE7010%40DB7PR06MB5960.eurprd06.prod.outlook.com.

[Steve Kodź]

Michael,

We've kindly been given permission by Rob Handcock at Quantum Sports
Cars to share the Quantum build manuals, so I've added a FAQ to the club
website with the wiring section I've scanned this morning.  It's about
11Mb, so I've not attached to this message, but it can be downloaded here:

https://www.quantumowners.club/index.php/faq-qoc/3-faq-xtreme/322-xtreme-wiring-diagrams

Regards,
Steve

--
h4-turbo.co.uk
quantumowners.club

[Chris Young]

these are what Mark sent me several years ago now!  (I no longer have an xtreme)

To view this discussion on the web visit https://groups.google.com/d/msgid/quantumowners/CAFvs5%3D4FsFoObxR4FXrcCFwKfLn_MF60QP9L4-tApFmfMr49%3Dg%40mail.gmail.com.

[Steve Kodź]

Thanks Chris - I've added a new FAQ to consolidate the various build manuals/sections for the Xtreme.

https://www.quantumowners.club/index.php/faq-qoc/3-faq-xtreme/323-where-can-i-get-the-xtreme-build-manual

Regards,
Steve

To view this discussion on the web visit https://groups.google.com/d/msgid/quantumowners/CADtdJ5LXyZBkNfGc%2BtwAOqEHiq5BYpbqhEqmiQK9Yep4uKXtHg%40mail.gmail.com.

For more options, visit https://groups.google.com/d/optout.

-- 
h4-turbo.co.uk
quantumowners.club

[Jim Hearne]

Hi Steve,

 

Can we consolidate copies of all the build manuals and the addendum sheets somewhere on the site ?

I have a fair amount already scanned.

 

Jim

> To unsubscribe from this group and stop receiving emails from it, send an email to mailto:quantumowners%2Bunsu...@googlegroups.com.

> To view this discussion on the web visit https://groups.google.com/d/msgid/quantumowners/076d4f3e-6e2e-4c88-9031-1738183e7d94%40googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.

--
--
You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group.
To post to this group, send email to quantu...@googlegroups.com
To unsubscribe from this group, send email to quantumowner...@googlegroups.com
For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en

IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s).
---
You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group.

To unsubscribe from this group and stop receiving emails from it, send an email to mailto:quantumowners%2Bunsu...@googlegroups.com.

-- 
h4-turbo.co.uk
quantumowners.club

--
--
You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group.
To post to this group, send email to quantu...@googlegroups.com
To unsubscribe from this group, send email to quantumowner...@googlegroups.com
For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en
 
IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s).
---
You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group.
To unsubscribe from this group and stop receiving emails from it, send an email to quantumowner...@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/quantumowners/64c0b0ab-d951-e48b-b3dd-f958225b6735%40h4-turbo.co.uk.

[Steve Kodź]

Jim,

Send me anything you have directly and I'll create the relevant pages/sections.

If anyone else has useful documentation in electronic format please email it to me directly.

Regards,
Steve (QOC Web Officer)

To view this discussion on the web visit https://groups.google.com/d/msgid/quantumowners/B317BD2C0ED54EBE982EC1F433481329%40JimQuad.

For more options, visit https://groups.google.com/d/optout.

-- 
h4-turbo.co.uk
quantumowners.club

[Nigel Plant]

Have just collected mine, but it's the same as those already posted.
Steve will send you the Zetec supplement covering the Zetec specific info.
Nigel

[Michael Aitken]

Thanks everyone for the info will have a good look over the weekend and hopefully get it sorted. On the way back from Stoneleigh my indicators stopped working the fuse kept blowing so stupidly put a bigger one in and cause a short replace that wire indicators working again and everything else is fine just main beam not working.