Suggestions: Customizable shortcuts and cone masks

[reb...@gmail.com]

Hello,
Just two little suggestions for the future, for the wish list.
PtGui works well and most of the settings I make are in the masks part. So the keys I mainly use when using PtGui are K and L to change the brush size.
Everything else is done with the mouse and I don't want to set up a lot of extra buttons on my mouse, I'm happy to use my left hand from an ergonomic point of view. My suggestion would be to be able to choose your own shortcuts. Everyone has their own point of view. Personally, as 99% of the keys I use in PtGui are K and L, I would put them where my hand naturally falls, i.e. on the left side of the keyboard towards the S, D or F keys, so that I don't have to bend my shoulders too much, as I often do when my hands are interacting with each other on the desk.
Another more anectodic idea would be to allow the mask stroke size to be changed between 2 mouse clicks to produce a stroke shape that is cone shaped. Indeed, very often it is this shape there that I seek to produce because my masks often turn around the sun and thus those are often in the shape of cone like the luminous rays.
Sincerely yours,
Thibaud

[PTGui Support]

Hi Thibaud,

I've added your requests to the wish list.

Kind regards,

Joost Nieuwenhuijse
www.ptgui.com

> --
> You received this message because you are subscribed to the Google
> Groups "PTGui Support" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to ptgui+un...@googlegroups.com
> <mailto:ptgui+un...@googlegroups.com>.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/ptgui/46107199-4d4d-4e89-9a60-c4c2dc572ad8n%40googlegroups.com <https://groups.google.com/d/msgid/ptgui/46107199-4d4d-4e89-9a60-c4c2dc572ad8n%40googlegroups.com?utm_medium=email&utm_source=footer>.

[Stephan Weber]

Good improvement.

One example: I made almost the whole day photos with some dirt on the sensor. I could mask that out. But doing this for hundreds of pictures was quite an effort. Would be great to load last used mask with a key like ctrlL or whatever.

To unsubscribe from this group and stop receiving emails from it, send an email to ptgui+un...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/ptgui/8e42c405-89c6-f5ef-4fb4-452c98b274e5%40ptgui.com.

[PTGui Support]

Hi Stephan,

You can copy and paste a mask to multiple images at once in the Source
Images tab.

Right click on an image, choose 'Copy Mask'.
Then select multiple images, right click, 'Paste Mask'.

Kind regards,

Joost Nieuwenhuijse
www.ptgui.com

On 05/11/2022 13:59, Stephan Weber wrote:
> Good improvement.
> One example: I made almost the whole day photos with some dirt on the
> sensor. I could mask that out. But doing this for hundreds of pictures
> was quite an effort. Would be great to load last used mask with a key
> like ctrlL or whatever.
>
> 'PTGui Support' via PTGui Support <pt...@googlegroups.com

> <mailto:pt...@googlegroups.com>> schrieb am Sa., 5. Nov. 2022, 07:48:
>
> Hi Thibaud,
>
> I've added your requests to the wish list.
>
> Kind regards,
>
> Joost Nieuwenhuijse

> www.ptgui.com <http://www.ptgui.com>

> <mailto:ptgui%2Bunsu...@googlegroups.com>
> > <mailto:ptgui+un...@googlegroups.com
> <mailto:ptgui%2Bunsu...@googlegroups.com>>.

> > To view this discussion on the web visit
> >

> https://groups.google.com/d/msgid/ptgui/46107199-4d4d-4e89-9a60-c4c2dc572ad8n%40googlegroups.com <https://groups.google.com/d/msgid/ptgui/46107199-4d4d-4e89-9a60-c4c2dc572ad8n%40googlegroups.com> <https://groups.google.com/d/msgid/ptgui/46107199-4d4d-4e89-9a60-c4c2dc572ad8n%40googlegroups.com?utm_medium=email&utm_source=footer <https://groups.google.com/d/msgid/ptgui/46107199-4d4d-4e89-9a60-c4c2dc572ad8n%40googlegroups.com?utm_medium=email&utm_source=footer>>.

>
> --
> You received this message because you are subscribed to the Google
> Groups "PTGui Support" group.
> To unsubscribe from this group and stop receiving emails from it,
> send an email to ptgui+un...@googlegroups.com

> <mailto:ptgui%2Bunsu...@googlegroups.com>.

> To view this discussion on the web visit

> https://groups.google.com/d/msgid/ptgui/8e42c405-89c6-f5ef-4fb4-452c98b274e5%40ptgui.com <https://groups.google.com/d/msgid/ptgui/8e42c405-89c6-f5ef-4fb4-452c98b274e5%40ptgui.com>.

>
> --
> You received this message because you are subscribed to the Google
> Groups "PTGui Support" group.
> To unsubscribe from this group and stop receiving emails from it, send

> an email to ptgui+un...@googlegroups.com
> <mailto:ptgui+un...@googlegroups.com>.
> To view this discussion on the web visit

> https://groups.google.com/d/msgid/ptgui/CAKMwCnR6fQJwHp6nBuZSvNA_wgVGOLxMA89xMGLmrBysEWxcDQ%40mail.gmail.com <https://groups.google.com/d/msgid/ptgui/CAKMwCnR6fQJwHp6nBuZSvNA_wgVGOLxMA89xMGLmrBysEWxcDQ%40mail.gmail.com?utm_medium=email&utm_source=footer>.