open5gs-ueransim profile

[Leo Zidane]

Hi all,

I encountered an issue when executing the command  build/nr-ue -c config/open5gs-ue.yaml to connect the simulated UE to the gNB. 

Below is my SSH terminals output:

root@pc491:/users/leonard# dir
install_script_output
root@pc491:/users/leonard# cd ..
root@pc491:/users# cd ..
root@pc491:/# cd /root/UERANSIM
root@pc491:~/UERANSIM# dir
build                CMakeLists.txt  LICENSE   README.md  tools
cmake-build-release  config          makefile  src
root@pc491:~/UERANSIM# sudo su
root@pc491:~/UERANSIM# build/nr-gnb -c config/open5gs-gnb.yaml
UERANSIM v3.2.0
[2021-12-17 00:34:31.545] [sctp] [info] Trying to establish SCTP connection... (10.10.1.2:38412)
[2021-12-17 00:34:31.627] [sctp] [info] SCTP connection established (10.10.1.2:38412)
[2021-12-17 00:34:31.627] [sctp] [debug] SCTP association setup ascId[1]
[2021-12-17 00:34:31.627] [ngap] [debug] Sending NG Setup Request
[2021-12-17 00:34:31.627] [ngap] [debug] NG Setup Response received
[2021-12-17 00:34:31.627] [ngap] [info] NG Setup procedure is successful

root@pc491:~/UERANSIM# build/nr-ue -c config/open5gs-ue.yaml
UERANSIM v3.2.0
[2021-12-17 00:35:15.046] [nas] [info] UE switches to state [MM-DEREGISTERED/PLMN-SEARCH]
[2021-12-17 00:35:17.247] [nas] [error] PLMN selection failure, no cells in coverage
[2021-12-17 00:35:17.546] [rrc] [warning] Acceptable cell selection failed, no cell is in coverage
[2021-12-17 00:35:17.546] [rrc] [error] Cell selection failure, no suitable or acceptable cell found
[2021-12-17 00:35:19.449] [nas] [error] PLMN selection failure, no cells in coverage
[2021-12-17 00:35:20.550] [nas] [info] UE switches to state [MM-DEREGISTERED/NO-CELL-AVAILABLE]
[2021-12-17 00:35:47.558] [rrc] [warning] Acceptable cell selection failed, no cell is in coverage
[2021-12-17 00:35:47.558] [rrc] [error] Cell selection failure, no suitable or acceptable cell found
[2021-12-17 00:35:50.277] [nas] [error] PLMN selection failure, no cells in coverage

[Kirk Webb]

I've informed the creator of this profile of this issue.

-Kirk

> --
> You received this message because you are subscribed to the Google Groups "Powder Users" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to powder-users...@googlegroups.com.
> To view this discussion on the web visit https://groups.google.com/d/msgid/powder-users/66b40e3b-442f-4d59-b0fb-7547c6751f80n%40googlegroups.com.