ENO Gasgone burner problem

4 views
Skip to first unread message

George Dubose

unread,
Sep 4, 2025, 4:42:01 AM (yesterday) Sep 4
to pearso...@googlegroups.com
Hello from Sardinia and Skylark,

My 18 year old ENO Gasgone oven has a couple of problems. I am wondering
if there are any gas experts in the group.

1. The electric piezo spark generator went on the fritz several years
ago. I replaced the suspect part, but nada...I just use a BBQ lighter.

2. I have attached two .mp4 short videos. One showing all three burners.
The big one on the left and the small one in the middle are fine, but
the burner on the left is a problem, when cold starting, I have to hold
the control knob for longer than 10 seconds or it goes out. Then the
fingers of fire take forever to completely fire up.

If anyone has any suggestions for replacement or what part(s) to
replace, I would be grateful.

Thanks,

George/Skylark

--
George DuBose
www.george-dubose.com

Wiedstrasse 16
D-50859 Cologne
Germany

IMG_3986.m4v
IMG_3987.m4v

George Dubose

unread,
Sep 4, 2025, 4:45:29 AM (yesterday) Sep 4
to pearso...@googlegroups.com




-------- Forwarded Message --------
Subject: [pearson ] ENO Gasgone burner problem
Date: Thu, 4 Sep 2025 10:39:12 +0200
From: 'George Dubose' via pearson-boats <pearso...@googlegroups.com>
Reply-To: pearso...@googlegroups.com
To: pearso...@googlegroups.com 
-- 
You received this message because you are subscribed to the Google Groups "pearson-boats" group.
To unsubscribe from this group and stop receiving emails from it, send an email to pearson-boat...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/pearson-boats/b8545a3c-6b27-abf5-cd3d-443e1bcb6eb5%40george-dubose.com.
IMG_3986.m4v
IMG_3987.m4v

Guy Johnson

unread,
Sep 4, 2025, 9:56:42 AM (yesterday) Sep 4
to pearso...@googlegroups.com
Not an expert. But I have fixed a couple of gas appliances. 
I found this generic ENO parts diagram online. https://penguineng.com/content/Eno_2_Burner_No_Grill_with_Oven.pdf
Part #71 is the burner thermocouple. 
I think your difficult burner needs a new thermocouple, that would explain why it takes so long to heat up before you can release the knob. It might also explain the wavering flame. 
While you have the burner disassembled to replace the thermocouple you could also clean or replace the burner jet. 

Guy
Puffin 10M #6
From: 'George Dubose' via pearson-boats <pearso...@googlegroups.com>
Sent: Thursday, September 4, 2025 4:44 AM
To: pearso...@googlegroups.com <pearso...@googlegroups.com>
Subject: Fwd: [pearson ] ENO Gasgone burner problem
 

George Dubose

unread,
Sep 4, 2025, 10:48:42 AM (yesterday) Sep 4
to pearso...@googlegroups.com
Thanks Guy,

My propane system was installed  to ABYC standards and all the safety
accessories are tested and maintained regularly.

I didn't install it myself and I know very little about the mechanics.

This "bad" burner is the one that was used the most often. I am curious
to learn how difficult it will be to access the thermocouple and change
the jet.

Guy Johnson

unread,
Sep 4, 2025, 10:58:57 AM (yesterday) Sep 4
to pearso...@googlegroups.com
Looks like you'll have to take the top tray off of the stove to access the thermocouple at the burner and where it connects to the control valve.
Guy

Sent from Outlook

From: 'George Dubose' via pearson-boats <pearso...@googlegroups.com>
Sent: Thursday, September 4, 2025 10:48 AM
To: pearso...@googlegroups.com <pearso...@googlegroups.com>
Subject: [pearson ] ENO Gasgone burner problem
 
Thanks Guy,

My propane system was installed  to ABYC standards and all the safety
accessories are tested and maintained regularly.

I didn't install it myself and I know very little about the mechanics.

This "bad" burner is the one that was used the most often. I am curious
to learn how difficult it will be to access the thermocouple and change
the jet.

George/Skylark

--
George DuBose


Wiedstrasse 16
D-50859 Cologne
Germany

--
You received this message because you are subscribed to the Google Groups "pearson-boats" group.
To unsubscribe from this group and stop receiving emails from it, send an email to pearson-boat...@googlegroups.com.
Reply all
Reply to author
Forward
0 new messages