Configuration files of device
40 views
Skip to first unread message
Даниил Никитин
Aug 2, 2019, 10:29:02 AM8/2/19
to OpenWISP
Hello, I'm still newbie on OpenWISP2 . I installed OpenWISP controller, connected my device, created template: interfaces -> wireless interfacwes and chose radio1 in radio section that was in device configuration before OpenWISP installation. Now I only know how to set additional settings to my device. But how can I see and change standard settings of my device, which I didn't set using controller.
I will be Thanksfull if anyone helps me.
best wishes,
best wishes,
Daniil Nikitin
A Stanley
Aug 2, 2019, 11:33:54 AM8/2/19
to open...@googlegroups.com
You should still be able to access the web interface on the lan side of the device. You can also enable/allow ssh on the wan interface for remote access to the AP.
--
You received this message because you are subscribed to the Google Groups "OpenWISP" group.
To unsubscribe from this group and stop receiving emails from it, send an email to openwisp+u...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/openwisp/ca7bf1b7-93f7-4f3a-94c2-1ad923caa4e4%40googlegroups.com.
Federico Capoano
Aug 2, 2019, 12:42:55 PM8/2/19
to OpenWISP
Hi Daniil,
at the moment you have to define the configuration you want to install on your devices from scratch.
In the future we should get to the point in which the device upon registration uploads the configuration into openwisp, but there are some open issues we need to resolve before getting there and it takes some considerable effort.
Best regards
Federico
To view this discussion on the web, visit https://groups.google.com/d/msgid/openwisp/CAP6YPdpvpBha0pqYU%3DdB1QowhwvPxAOpzFO8t_xfREHrtJYPJg%40mail.gmail.com.
Daniil Nikitin
Aug 2, 2019, 2:16:24 PM8/2/19
to OpenWISP
пятница, 2 августа 2019 г., 19:42:55 UTC+3 пользователь Federico Capoano написал:
Thank you for a quick answer.Now I understand what I should do.
> Hi Daniil,
>
>
> at the moment you have to define the configuration you want to install on your devices from scratch.
>
>
> In the future we should get to the point in which the device upon registration uploads the configuration into openwisp, but there are some open issues we need to resolve before getting there and it takes some considerable effort.
>
>
> Best regards
> Federico
>
>
> On Fri, Aug 2, 2019 at 11:33 AM A Stanley <2st...@2stacks.net> wrote:
>
> You should still be able to access the web interface on the lan side of the device. You can also enable/allow ssh on the wan interface for remote access to the AP.
>
>
>
> On Fri, Aug 2, 2019 at 10:29 AM Даниил Никитин <nikitind...@gmail.com> wrote:
>
> Hello, I'm still newbie on OpenWISP2 . I installed OpenWISP controller, connected my device, created template: interfaces -> wireless interfacwes and chose radio1 in radio section that was in device configuration before OpenWISP installation. Now I only know how to set additional settings to my device. But how can I see and change standard settings of my device, which I didn't set using controller.
>
>
>
> I will be Thanksfull if anyone helps me.
> best wishes,
>
> Daniil Nikitin
>
>
>
>
> --
>
> You received this message because you are subscribed to the Google Groups "OpenWISP" group.
>
> To unsubscribe from this group and stop receiving emails from it, send an email to open...@googlegroups.com.
>
>
> at the moment you have to define the configuration you want to install on your devices from scratch.
>
>
> In the future we should get to the point in which the device upon registration uploads the configuration into openwisp, but there are some open issues we need to resolve before getting there and it takes some considerable effort.
>
>
> Best regards
> Federico
>
>
> On Fri, Aug 2, 2019 at 11:33 AM A Stanley <2st...@2stacks.net> wrote:
>
> You should still be able to access the web interface on the lan side of the device. You can also enable/allow ssh on the wan interface for remote access to the AP.
>
>
>
> On Fri, Aug 2, 2019 at 10:29 AM Даниил Никитин <nikitind...@gmail.com> wrote:
>
> Hello, I'm still newbie on OpenWISP2 . I installed OpenWISP controller, connected my device, created template: interfaces -> wireless interfacwes and chose radio1 in radio section that was in device configuration before OpenWISP installation. Now I only know how to set additional settings to my device. But how can I see and change standard settings of my device, which I didn't set using controller.
>
>
>
> I will be Thanksfull if anyone helps me.
> best wishes,
>
> Daniil Nikitin
>
>
>
>
> --
>
> You received this message because you are subscribed to the Google Groups "OpenWISP" group.
>
>
> To view this discussion on the web, visit https://groups.google.com/d/msgid/openwisp/ca7bf1b7-93f7-4f3a-94c2-1ad923caa4e4%40googlegroups.com.
>
>
>
>
>
>
> --
>
> You received this message because you are subscribed to the Google Groups "OpenWISP" group.
>
> To unsubscribe from this group and stop receiving emails from it, send an email to open...@googlegroups.com.
> To view this discussion on the web, visit https://groups.google.com/d/msgid/openwisp/ca7bf1b7-93f7-4f3a-94c2-1ad923caa4e4%40googlegroups.com.
>
>
>
>
>
>
> --
>
> You received this message because you are subscribed to the Google Groups "OpenWISP" group.
>
>
> To view this discussion on the web, visit https://groups.google.com/d/msgid/openwisp/CAP6YPdpvpBha0pqYU%3DdB1QowhwvPxAOpzFO8t_xfREHrtJYPJg%40mail.gmail.com.
Hi Federico,
> To view this discussion on the web, visit https://groups.google.com/d/msgid/openwisp/CAP6YPdpvpBha0pqYU%3DdB1QowhwvPxAOpzFO8t_xfREHrtJYPJg%40mail.gmail.com.
Thank you for a quick answer.Now I understand what I should do.
Daniil Nikitin
Aug 3, 2019, 4:50:47 PM8/3/19
to OpenWISP
пятница, 2 августа 2019 г., 19:42:55 UTC+3 пользователь Federico Capoano написал:
> Hi Daniil,
>
>
> at the moment you have to define the configuration you want to install on your devices from scratch.
>
>
> In the future we should get to the point in which the device upon registration uploads the configuration into openwisp, but there are some open issues we need to resolve before getting there and it takes some considerable effort.
>
>
> Best regards
> Federico
>
>
> On Fri, Aug 2, 2019 at 11:33 AM A Stanley <2st...@2stacks.net> wrote:
>
> You should still be able to access the web interface on the lan side of the device. You can also enable/allow ssh on the wan interface for remote access to the AP.
>
>
>
> On Fri, Aug 2, 2019 at 10:29 AM Даниил Никитин <nikitind...@gmail.com> wrote:
>
> Hello, I'm still newbie on OpenWISP2 . I installed OpenWISP controller, connected my device, created template: interfaces -> wireless interfacwes and chose radio1 in radio section that was in device configuration before OpenWISP installation. Now I only know how to set additional settings to my device. But how can I see and change standard settings of my device, which I didn't set using controller.
>
>
>
> I will be Thanksfull if anyone helps me.
> best wishes,
>
> Daniil Nikitin
>
>
>
>
> --
>
> You received this message because you are subscribed to the Google Groups "OpenWISP" group.
>
> To unsubscribe from this group and stop receiving emails from it, send an email to open...@googlegroups.com.
>
>
> at the moment you have to define the configuration you want to install on your devices from scratch.
>
>
> In the future we should get to the point in which the device upon registration uploads the configuration into openwisp, but there are some open issues we need to resolve before getting there and it takes some considerable effort.
>
>
> Best regards
> Federico
>
>
> On Fri, Aug 2, 2019 at 11:33 AM A Stanley <2st...@2stacks.net> wrote:
>
> You should still be able to access the web interface on the lan side of the device. You can also enable/allow ssh on the wan interface for remote access to the AP.
>
>
>
> On Fri, Aug 2, 2019 at 10:29 AM Даниил Никитин <nikitind...@gmail.com> wrote:
>
> Hello, I'm still newbie on OpenWISP2 . I installed OpenWISP controller, connected my device, created template: interfaces -> wireless interfacwes and chose radio1 in radio section that was in device configuration before OpenWISP installation. Now I only know how to set additional settings to my device. But how can I see and change standard settings of my device, which I didn't set using controller.
>
>
>
> I will be Thanksfull if anyone helps me.
> best wishes,
>
> Daniil Nikitin
>
>
>
>
> --
>
> You received this message because you are subscribed to the Google Groups "OpenWISP" group.
>
>
> To view this discussion on the web, visit https://groups.google.com/d/msgid/openwisp/ca7bf1b7-93f7-4f3a-94c2-1ad923caa4e4%40googlegroups.com.
>
>
>
>
>
>
> --
>
> You received this message because you are subscribed to the Google Groups "OpenWISP" group.
>
> To unsubscribe from this group and stop receiving emails from it, send an email to open...@googlegroups.com.
> To view this discussion on the web, visit https://groups.google.com/d/msgid/openwisp/ca7bf1b7-93f7-4f3a-94c2-1ad923caa4e4%40googlegroups.com.
>
>
>
>
>
>
> --
>
> You received this message because you are subscribed to the Google Groups "OpenWISP" group.
>
>
> To view this discussion on the web, visit https://groups.google.com/d/msgid/openwisp/CAP6YPdpvpBha0pqYU%3DdB1QowhwvPxAOpzFO8t_xfREHrtJYPJg%40mail.gmail.com.
Federico, do you have a roadmap for this feature(uploading the configuration into openwisp)?> To view this discussion on the web, visit https://groups.google.com/d/msgid/openwisp/CAP6YPdpvpBha0pqYU%3DdB1QowhwvPxAOpzFO8t_xfREHrtJYPJg%40mail.gmail.com.
Reply all
Reply to author
Forward
0 new messages