Is the hard facing check-crack accepted by secIX ?

[Mehdi Vafakhah]

Dear experts

According to hard facing weld overlay requirements PT shall be done and i know about qw-195.2 but my question is " what about the check cracks? " its accepted according to sec IX ?
If yes could you plz refer me the related paragraph.

Thank You All And Best Regards.

[Mohd Siraj]

Check B31.3 design code.

Anyway anyform of crack is.not accepted.

[Ramin Kondori]

ASME deals with pressure systems. Check cracks are for those applications where "wear resistance" is desirable (i.e. crushers etc.). Those applications do not refer to ASME.

Ramin  Kondori

Sr. QA/QC & Welding Engineer

-----------------------------------------------------------

PG-Dip. in Welding Engineering (IWE  AT  0070)

BGAS Painting Inspector

ASNT Level I&II

                        

On Sat, May 14, 2016 at 2:25 PM, Mohd Siraj <mohd...@gmail.com> wrote:

Check B31.3 design code.

Anyway anyform of crack is.not accepted.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To post to this group, send email to material...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/e935c1cd-179c-40b4-882b-0302670f3b07%40googlegroups.com.

For more options, visit https://groups.google.com/d/optout.