P-No. of UNS 06626

[ilham fauzi]

Dear Experts,

What is P-No. of UNS 06626, my client say its P No.45 but that materials simillar with UNS 06625 which is its P-No.43. Please for the advice

Thanks

[Mostafa DAIF]

Dear all,

The P number is P42 according to ASME Boiler & Pressure Vessel Code Section IX;

Best Regards,

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/c105a43f-72c7-44b6-96e1-0e11095552a3n%40googlegroups.com.

--

Mostafa DAIF Chef preparateur T : 05 23 38 90 72 M : 06 61 54 12 95 TAQA MOROCCO PB 99 Sidi Bouzid - El Jadida 24 000 - Maroc taqamorocco.ma

TAQA MOROCCO is a member of the Abu Dhabi National Energy Company Group of companies.    The information contained in this communication is confidential, may be attorney-client privileged, and is intended only for the use of the addressee. It is the property of Abu Dhabi National Energy Company PJSC (TAQA) or one of its affiliates. Unauthorized use, disclosure or copying of this communication or any part thereof is strictly prohibited and may be unlawful. If you have received this communication in error, please notify me immediately by return email and destroy this communication and all copies thereof, including attachments.

[cyndiso yapi]

Its P-No 43 check ASME IX Table QW422 it's listed there 

--

[Chiranjeevi A]

Dear Fauzi,

Please refer to the Limiting chemical composition in MTC & concerning ASME Code Case 2276 

It should be P-No. 43

--

[Chiranjeevi A]

Dear all,

Please refer to the table below for the required chemical composition of UNS 06626 under case 2276, as per the ASME BPV code cases. The P-No. for material UNS 06626 is P-43.

To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CABktmDfFasCLFOTjL_7%2Bogw_AjzR2T_aTCeoV_oOr%3DZTNiH7kw%40mail.gmail.com.

[ilham fauzi]

Dear All Experts,

Thanks all for the advice and information. I checked ASME code case 2276-1, which states that UNS 06626 can be classified as category P-No.43.

Thanks a bunch.

Best Regards,
M Ilham Fauzi Pane
Welding Engineer

You received this message because you are subscribed to a topic in the Google Groups "Materials & Welding" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/materials-welding/SpmpHXyXbjw/unsubscribe.
To unsubscribe from this group and all its topics, send an email to materials-weld...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAN4%2Bm0zYAakAwiLyp2J3AqpDMTSFAhCZXPSKUY5ZFFYy2gTh8Q%40mail.gmail.com.

[Vinay]

PL confirm , it is UNS N06626 . Its Ni-Cr moly steel..   P-45 is correct.

P-43 is for Inconel 625 i.e UNS 06625 . 

--