Change groove type in D1.1

[hoàng nguyễn]

Dear Experts,

Could you please advise me for a question:

I have a PQR qualifies single V, can I write WPS for single V, doubleV, single Bevel, double Bevel.

Thank Experts

[chandan sharma]

Yes,  you can change as joint design is non essential variable. 

Regards, 

Chandan Sharma 

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAM8%3DVVG6wmP0-XVh9jNLDqre4vs_wjZK-NNSYUmKwRjNyfsx5w%40mail.gmail.com.

[Maha Charu]

Yes

On Thu 5 Sep, 2019, 8:45 AM hoàng nguyễn, <nhathoa...@gmail.com> wrote:

[Hani Al Masry]

What is the electrode and MIG wire for welding SS pad eyes 316L with Aluminium pipe 6063

Regards 

HA

[Bien_ND / weldinginspections.net]

Reduce angle bevel are not allowed.

[Kannayeram Gnanapandithan]

Is it possible in fusion welding???

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAKOkEzd-9_7A%3DnSc19nLCLWt7SgVzLV68SOgqOMr7hRkqRgxEA%40mail.gmail.com.

[Hani Al Masry]

No

To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAJzm4eMi_NwYi9R4o8fAKKrQnP9C8xZTDrhD011N%2B2DhPchJpw%40mail.gmail.com.

[hoàng nguyễn]

Thank you very much.

I don't know why summary PQR of my company or summary PQR of other company has all joint design (single V, single B, double V, double B). If 1 PQR with 1 joint design can qualify for other joint  design, why they must cost money for them.

(sorry, my english is not good)

Thank Experts

Regards

Nguyễn Nhật Hoàng

Vào Th 2, 9 thg 9, 2019 vào lúc 10:54 Bien_ND / weldinginspections.net <bck...@gmail.com> đã viết:

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/1deb3f5c-b994-4037-b596-fcb72c792fc0%40googlegroups.com.

[Bien_ND / weldinginspections.net]

You should develope a new WPS compliant with Client's spec. and within the qualified range.

A qualified PQR may have one or two joint design combination at specific position.

So, there are no more type of groove design / joint details in the PQR.

On Monday, September 9, 2019 at 4:31:02 PM UTC+7, Nhật Hoàng Bk wrote:

Thank you very much.

I don't know why summary PQR of my company or summary PQR of other company has all joint design (single V, single B, double V, double B). If 1 PQR with 1 joint design can qualify for other joint  design, why they must cost money for them.

(sorry, my english is not good)

Thank Experts

Regards

Nguyễn Nhật Hoàng

Vào Th 2, 9 thg 9, 2019 vào lúc 10:54 Bien_ND / weldinginspections.net <bck...@gmail.com> đã viết:

On Thursday, September 5, 2019 at 10:15:44 AM UTC+7, Nhật Hoàng Bk wrote:
> Dear Experts,
>
>
> Could you please advise me for a question:
> I have a PQR qualifies single V, can I write WPS for single V, doubleV, single Bevel, double Bevel.
>
>
> Thank Experts

Reduce angle bevel are not allowed.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.

To unsubscribe from this group and stop receiving emails from it, send an email to material...@googlegroups.com.