dissimilar weld

[manish kulkarni]

Any suggestions for consumable slection for SS 310S to cast Inconnel 625 material for sour service and max temp. exposure 650 Deg.C??
Any corrosion tests for such joints?

Regards,
Manish kulkarni

[Ramin Kondori]

ER NiCrMo-3 will do the gob

Ramin  Kondori

Sr. QA/QC & Welding Engineer

-----------------------------------------------------------

PG-Dip. in Welding Engineering (IWE  AT  0070)

BSc. in Civil Engineering (IUT)

BGAS Painting Inspector

ASNT Level I&II

                        

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To post to this group, send email to material...@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/1890907287.6111280.1456051715106.JavaMail.yahoo%40mail.yahoo.com.
For more options, visit https://groups.google.com/d/optout.

[manish kulkarni]

But there are limitations for temp. In spur service for this consumable.

Sent from Yahoo Mail on Android

On Sun, 21 Feb, 2016 at 4:13 pm, Ramin Kondori

<ramink...@gmail.com> wrote:

To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAEagfUgmUSDpLFWg86XT2N-hFBpmBk4LJNJHdi-NH0cSCT6Xrg%40mail.gmail.com.

[Ramin Kondori]

if 625 meets your service requirements, so will ERNiCrMo-3

What I mean is that this filler metal matches the properties of 625 quite well...

So if 625 is fit for this service, ERNiCrMo-3 could be acceptable too...

Ramin  Kondori

Sr. QA/QC & Welding Engineer

-----------------------------------------------------------

PG-Dip. in Welding Engineering (IWE  AT  0070)

BSc. in Civil Engineering (IUT)

BGAS Painting Inspector

ASNT Level I&II

                        

To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/1981026294.6150239.1456060085581.JavaMail.yahoo%40mail.yahoo.com.

[manish kulkarni]

Materials come with solution annealed/ annealed conditions, consumables do not.
Any way ER NiCr-3 is being advised.
Thanks

Regards,
Manish kulkarni
--------------------------------------------
On Sun, 21/2/16, Ramin Kondori <ramink...@gmail.com> wrote:

Subject: Re: [MW:24340] dissimilar weld
To: material...@googlegroups.com
Date: Sunday, 21 February, 2016, 9:30 PM

if 625
meets your service requirements, so will ERNiCrMo-3What
I mean is that this filler metal matches the properties of

625 quite well...So if 625 is fit for this

service, ERNiCrMo-3 could be acceptable
too...


Ramin 
KondoriSr. QA/QC & Welding

Engineer-----------------------------------------------------------PG-Dip. in Welding

Engineering (IWE  AT  0070)BSc. in Civil Engineering
(IUT)BGAS Painting
InspectorASNT Level
I&II                   
    

On Sun, Feb 21, 2016 at
4:38 PM, manish kulkarni <kul_m...@yahoo.co.in>
wrote:
But there
are limitations for temp. In spur service for this
consumable.

Sent
from Yahoo Mail on Android

On Sun, 21
Feb, 2016 at 4:13 pm, Ramin Kondori<ramink...@gmail.com>
wrote: ER NiCrMo-3 will do
the gob



Ramin 
KondoriSr. QA/QC & Welding

Engineer-----------------------------------------------------------PG-Dip. in Welding

Engineering (IWE  AT  0070)BSc. in Civil Engineering
(IUT)BGAS Painting
InspectorASNT Level
I&II                   
    

To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAEagfUi31%3DGhuLoS7jgMDs2NgAzuuZotRq4Svh8JvUUFh6S12Q%40mail.gmail.com.