Dear Yasoob,
The statement appears to relate to a quality control or inspection procedure. Here's a more precise interpretation of the process:
First Test:
Second Test:
Here's a refined version of the process:
Initial Inspection:
Secondary Inspection:
This process ensures that if an initial small sample indicates a potential quality issue, further scrutiny is applied to confirm the problem before deciding to inspect the entire batch, thus preventing defective items from proceeding further in the production or distribution process.
Dear Sir,
RT If one fails in 10% then there is a Trecer of two. And second time fails then check the full lot.
--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/2F7D605A-7708-48A1-9659-5C93BD77DF80%40binquraya.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAADcG1rjF3u7wyfQTrdUPQgOOTTpiV1pNBJ%3Dun-nKRCGxRGE1Q%40mail.gmail.com.