Fillet weld cracks below 6 mm with suitable NDT.

[Mohammed Ghani]

Dear experts,

I want to locate Fillet weld cracks below 6 mm for 22 mm plate with double V  preparation.
Is there any special techniques from NDT I can use to identify cracks below 6 mm.

Please suggest me if any suitable NDT procedure for this. It is a bit urgent. 

Appreciate your respond.

Regards,
Mohammed ghani.

[Agustin Jimenez]

Hello

I recomend Phased Array ultrasonic technic.

Agustín
Level 2 VT PT MT UT RT


Enviado desde mi smartphone Samsung Galaxy.

-------- Mensaje original --------
De: Mohammed Ghani <ghan...@gmail.com>
Fecha:28/02/2016 04:31 AM (GMT-04:30)
Para: material...@googlegroups.com
Cc:
Asunto: [MW:24396] Fillet weld cracks below 6 mm with suitable NDT.

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To post to this group, send email to material...@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAG7AWVhBp4jWOun%3DrCPmJuh%2B1PLib%3D9%2BFM4KWDSsuRAUVRSVsg%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

[Jayachandran]

Hello Sir,

I hope it is Butt weld T-Joint, so you can apply normal UT also.

Regards

Jayachandran V.

On Sun, Feb 28, 2016 at 1:01 PM, Mohammed Ghani <ghan...@gmail.com> wrote:

This message is eligible for Automatic Cleanup! (ghan...@gmail.com) Add cleanup rule | More info

[Mohd Siraj]

How u know crack is exactly 6mm below??

quite interesting.
Do RT.

[Mohammed Ghani]

Dear,

Thanks for the reply.

This is for RIG spudcan crack found after 3 years in service. .. I need to rectify if any more possible cracks available in fillet joints... usually with MPI we could locate cracks upto 5 to 6 mm...

Please prove me more suggestions.

Regards,
Mohammed ghani.

To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/h8u94emwh70urwdu19wnl0ig.1456666226993%40email.android.com.

[dili...@gmail.com]

I suppose you mean "verify" when you write "rectify". Unless you use huge magnets the max detection depth with MPI is no more than 2 mm

Sent from my BlackBerry 10 smartphone.

From: Mohammed Ghani Sent: Δευτέρα, 29 Φεβρουαρίου 2016 - 05:19 To: material...@googlegroups.com Reply To: material...@googlegroups.com Subject: RE: [MW:24403] Fillet weld cracks below 6 mm with suitable NDT.

To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAG7AWVhUaR90G2HdKQb8uuSxE5Ne_WhFkS0RksZdiMUwZ%2BWojw%40mail.gmail.com.

[Mohammed Ghani]

After performing gauging, we found most of the cracks are below 6mm

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To post to this group, send email to material...@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.

To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/1346669f-f39d-4460-a282-dc42b4377911%40googlegroups.com.

[Mohammed Ghani]

Dear,

It is fillet weld for sure. ...

Regards,
Mohammed ghani.

To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CANvSE6m_tZVX3%2B5-u-jbGYDg0D%2BHmeuTQpJUARQ3qzrMVf_cZg%40mail.gmail.com.

[muthu barathi]

Dear Sir,

You may carryout with UT and sketch is attached



Thanking You.

With Warm Regards,

Muthu Barathi P.
Mobile : +919967300544 (Only message )
Mobile No. +965 50989210 (KUWAIT) after 8PM

From: Mohammed Ghani <ghan...@gmail.com>
Sent: Sun, 28 Feb 2016 16:17:38
To: material...@googlegroups.com
Subject: [MW:24396] Fillet weld cracks below 6 mm with suitable NDT.

Dear experts,

I want to locate Fillet weld cracks below 6 mm for 22 mm plate with double V  preparation.
Is there any special techniques from NDT I can use to identify cracks below 6 mm.

Please suggest me if any suitable NDT procedure for this. It is a bit urgent. 

Appreciate your respond.

Regards,
Mohammed ghani.

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To post to this group, send email to material...@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAG7AWVhBp4jWOun%3DrCPmJuh%2B1PLib%3D9%2BFM4KWDSsuRAUVRSVsg%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

Get your own FREE website, FREE domain & FREE mobile app with Company email.

Know More >