[PATCH 0/5] Add support for Pine64 PineTab

[Icenowy Zheng]

This patchset tries to add support for the PineTab tablet from Pine64.

As it uses a specific MIPI-DSI panel, the support of the panel should be
introduced first, with its DT binding.

Then a device tree is added. Thanks to the community's contributions
these years, we now have most of the functionalities of the tablet
available in this device tree.

Icenowy Zheng (5):
dt-bindings: vendor-prefix: add Shenzhen Feixin Photoelectics Co., Ltd
dt-bindings: panel: add Feixin K101 IM2BA02 MIPI-DSI panel
drm/panel: Add Feixin K101 IM2BA02 panel
dt-bindings: arm: sunxi: add binding for PineTab tablet
arm64: dts: allwinner: a64: add support for PineTab

.../devicetree/bindings/arm/sunxi.yaml | 5 +
.../display/panel/feixin,k101-im2ba02.yaml | 54 ++
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
MAINTAINERS | 6 +
arch/arm64/boot/dts/allwinner/Makefile | 1 +
.../boot/dts/allwinner/sun50i-a64-pinetab.dts | 461 +++++++++++++++
drivers/gpu/drm/panel/Kconfig | 9 +
drivers/gpu/drm/panel/Makefile | 1 +
.../gpu/drm/panel/panel-feixin-k101-im2ba02.c | 548 ++++++++++++++++++
9 files changed, 1087 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/feixin,k101-im2ba02.yaml
create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts
create mode 100644 drivers/gpu/drm/panel/panel-feixin-k101-im2ba02.c

--
2.23.0

[Icenowy Zheng]

Shenzhen Feixin Photoelectics Co., Ltd is a company to provide LCD
modules.

Add its vendor prefix.

Signed-off-by: Icenowy Zheng <ice...@aosc.io>
---
Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 3dab8150dae7..a6d53bbbe33d 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -335,6 +335,8 @@ patternProperties:
description: Fastrax Oy
"^fcs,.*":
description: Fairchild Semiconductor
+ "^feixin,.*":
+ description: Shenzhen Feixin Photoelectic Co., Ltd
"^feiyang,.*":
description: Shenzhen Fly Young Technology Co.,LTD.
"^firefly,.*":
--
2.23.0

[Icenowy Zheng]

Feixin K101 IM2BA02 is a 10.1" 800x1280 4-lane MIPI-DSI panel.

Add device tree binding for it.

Signed-off-by: Icenowy Zheng <ice...@aosc.io>
---

.../display/panel/feixin,k101-im2ba02.yaml | 54 +++++++++++++++++++
1 file changed, 54 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/feixin,k101-im2ba02.yaml

diff --git a/Documentation/devicetree/bindings/display/panel/feixin,k101-im2ba02.yaml b/Documentation/devicetree/bindings/display/panel/feixin,k101-im2ba02.yaml
new file mode 100644
index 000000000000..7176d14893ff
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/feixin,k101-im2ba02.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/feixin,k101-im2ba02.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Feixin K101 IM2BA02 10.1" MIPI-DSI LCD panel
+
+maintainers:
+ - Icenowy Zheng <ice...@aosc.io>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: feixin,k101-im2ba02
+ reg: true
+ backlight: true
+ reset-gpios: true
+ avdd-supply:
+ description: regulator that supplies the AVDD voltage
+ dvdd-supply:
+ description: regulator that supplies the DVDD voltage
+ cvdd-supply:
+ description: regulator that supplies the CVDD voltage
+
+required:
+ - compatible
+ - reg
+ - backlight
+ - avdd-supply
+ - dvdd-supply
+ - cvdd-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ &dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ panel@0 {
+ compatible = "feixin,k101-im2ba02";
+ reg = <0>;
+ avdd-supply = <&reg_dc1sw>;
+ dvdd-supply = <&reg_dc1sw>;
+ cvdd-supply = <&reg_ldo_io1>;
+ reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>;
+ backlight = <&backlight>;
+ };
+ };
+
+...
--
2.23.0

[Icenowy Zheng]

Feixin K101 IM2BA02 is a 800x1280 4-lane MIPI-DSI LCD panel.

Add a panel driver for it.

Signed-off-by: Icenowy Zheng <ice...@aosc.io>
---

MAINTAINERS | 6 +

drivers/gpu/drm/panel/Kconfig | 9 +
drivers/gpu/drm/panel/Makefile | 1 +
.../gpu/drm/panel/panel-feixin-k101-im2ba02.c | 548 ++++++++++++++++++

4 files changed, 564 insertions(+)
create mode 100644 drivers/gpu/drm/panel/panel-feixin-k101-im2ba02.c

diff --git a/MAINTAINERS b/MAINTAINERS
index 908399316455..ef7d13125344 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5218,6 +5218,12 @@ T: git git://anongit.freedesktop.org/drm/drm-misc
S: Maintained
F: drivers/gpu/drm/tve200/

+DRM DRIVER FOR FEIXIN K101 IM2BA02 MIPI-DSI LCD PANELS
+M: Icenowy Zheng <ice...@aosc.io>
+S: Maintained
+F: drivers/gpu/drm/panel/panel-feixin-k101-im2ba02.c
+F: Documentation/devicetree/bindings/display/panel/feixin,k101-im2ba02.yaml
+
DRM DRIVER FOR FEIYANG FY07024DI26A30-D MIPI-DSI LCD PANELS
M: Jagan Teki <ja...@amarulasolutions.com>
S: Maintained
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index ae44ac2ec106..4641ec804e5e 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -50,6 +50,15 @@ config DRM_PANEL_SIMPLE
that it can be automatically turned off when the panel goes into a
low power state.

+config DRM_PANEL_FEIXIN_K101_IM2BA02
+ tristate "Feixin K101 IM2BA02 panel"
+ depends on OF
+ depends on DRM_MIPI_DSI
+ depends on BACKLIGHT_CLASS_DEVICE
+ help
+ Say Y here if you want to enable support for the Feixin K101 IM2BA02
+ 4-lane 800x1280 MIPI DSI panel.
+
config DRM_PANEL_FEIYANG_FY07024DI26A30D
tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel"
depends on OF
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index 7c4d3c581fd4..442c17ccc62e 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -3,6 +3,7 @@ obj-$(CONFIG_DRM_PANEL_ARM_VERSATILE) += panel-arm-versatile.o
obj-$(CONFIG_DRM_PANEL_BOE_HIMAX8279D) += panel-boe-himax8279d.o
obj-$(CONFIG_DRM_PANEL_LVDS) += panel-lvds.o
obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o
+obj-$(CONFIG_DRM_PANEL_FEIXIN_K101_IM2BA02) += panel-feixin-k101-im2ba02.o
obj-$(CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D) += panel-feiyang-fy07024di26a30d.o
obj-$(CONFIG_DRM_PANEL_ILITEK_IL9322) += panel-ilitek-ili9322.o
obj-$(CONFIG_DRM_PANEL_ILITEK_ILI9881C) += panel-ilitek-ili9881c.o
diff --git a/drivers/gpu/drm/panel/panel-feixin-k101-im2ba02.c b/drivers/gpu/drm/panel/panel-feixin-k101-im2ba02.c
new file mode 100644
index 000000000000..45a62bdabb3f
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-feixin-k101-im2ba02.c
@@ -0,0 +1,548 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019-2020 Icenowy Zheng <ice...@aosc.io>
+ */
+
+#include <linux/gpio/consumer.h>
+#include <linux/delay.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regulator/consumer.h>
+
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_print.h>
+
+#define K101_IM2BA02_INIT_CMD_LEN 2
+
+struct k101_im2ba02 {
+ struct drm_panel panel;
+ struct mipi_dsi_device *dsi;
+
+ struct regulator *dvdd;
+ struct regulator *avdd;
+ struct regulator *cvdd;
+ struct gpio_desc *reset;
+};
+
+static inline struct k101_im2ba02 *panel_to_k101_im2ba02(struct drm_panel *panel)
+{
+ return container_of(panel, struct k101_im2ba02, panel);
+}
+
+struct k101_im2ba02_init_cmd {
+ u8 data[K101_IM2BA02_INIT_CMD_LEN];
+};
+
+static const struct k101_im2ba02_init_cmd k101_im2ba02_init_cmds[] = {
+ /* Switch to page 0 */
+ { .data = { 0xE0, 0x00 } },
+
+ /* Seems to be some password */
+ { .data = { 0xE1, 0x93} },
+ { .data = { 0xE2, 0x65 } },
+ { .data = { 0xE3, 0xF8 } },
+
+ /* Lane number, 0x02 - 3 lanes, 0x03 - 4 lanes */
+ { .data = { 0x80, 0x03 } },
+
+ /* Sequence control */
+ { .data = { 0x70, 0x02 } },
+ { .data = { 0x71, 0x23 } },
+ { .data = { 0x72, 0x06 } },
+
+ /* Switch to page 1 */
+ { .data = { 0xE0, 0x01 } },
+
+ /* Set VCOM */
+ { .data = { 0x00, 0x00 } },
+ { .data = { 0x01, 0x66 } },
+ /* Set VCOM_Reverse */
+ { .data = { 0x03, 0x00 } },
+ { .data = { 0x04, 0x25 } },
+
+ /* Set Gamma Power, VG[MS][PN] */
+ { .data = { 0x17, 0x00 } },
+ { .data = { 0x18, 0x6D } },
+ { .data = { 0x19, 0x00 } },
+ { .data = { 0x1A, 0x00 } },
+ { .data = { 0x1B, 0xBF } }, /* VGMN = -4.5V */
+ { .data = { 0x1C, 0x00 } },
+
+ /* Set Gate Power */
+ { .data = { 0x1F, 0x3E } }, /* VGH_R = 15V */
+ { .data = { 0x20, 0x28 } }, /* VGL_R = -11V */
+ { .data = { 0x21, 0x28 } }, /* VGL_R2 = -11V */
+ { .data = { 0x22, 0x0E } }, /* PA[6:4] = 0, PA[0] = 0 */
+
+ /* Set Panel */
+ { .data = { 0x37, 0x09 } }, /* SS = 1, BGR = 1 */
+
+ /* Set RGBCYC */
+ { .data = { 0x38, 0x04 } }, /* JDT = 100 column inversion */
+ { .data = { 0x39, 0x08 } }, /* RGB_N_EQ1 */
+ { .data = { 0x3A, 0x12 } }, /* RGB_N_EQ2 */
+ { .data = { 0x3C, 0x78 } }, /* set EQ3 for TE_H */
+ { .data = { 0x3D, 0xFF } }, /* set CHGEN_ON */
+ { .data = { 0x3E, 0xFF } }, /* set CHGEN_OFF */
+ { .data = { 0x3F, 0x7F } }, /* set CHGEN_OFF2 */
+
+ /* Set TCON parameter */
+ { .data = { 0x40, 0x06 } }, /* RSO = 800 points */
+ { .data = { 0x41, 0xA0 } }, /* LN = 1280 lines */
+
+ /* Set power voltage */
+ { .data = { 0x55, 0x0F } }, /* DCDCM */
+ { .data = { 0x56, 0x01 } },
+ { .data = { 0x57, 0x69 } },
+ { .data = { 0x58, 0x0A } },
+ { .data = { 0x59, 0x0A } },
+ { .data = { 0x5A, 0x45 } },
+ { .data = { 0x5B, 0x15 } },
+
+ /* Set gamma */
+ { .data = { 0x5D, 0x7C } },
+ { .data = { 0x5E, 0x65 } },
+ { .data = { 0x5F, 0x55 } },
+ { .data = { 0x60, 0x49 } },
+ { .data = { 0x61, 0x44 } },
+ { .data = { 0x62, 0x35 } },
+ { .data = { 0x63, 0x3A } },
+ { .data = { 0x64, 0x23 } },
+ { .data = { 0x65, 0x3D } },
+ { .data = { 0x66, 0x3C } },
+ { .data = { 0x67, 0x3D } },
+ { .data = { 0x68, 0x5D } },
+ { .data = { 0x69, 0x4D } },
+ { .data = { 0x6A, 0x56 } },
+ { .data = { 0x6B, 0x48 } },
+ { .data = { 0x6C, 0x45 } },
+ { .data = { 0x6D, 0x38 } },
+ { .data = { 0x6E, 0x25 } },
+ { .data = { 0x6F, 0x00 } },
+ { .data = { 0x70, 0x7C } },
+ { .data = { 0x71, 0x65 } },
+ { .data = { 0x72, 0x55 } },
+ { .data = { 0x73, 0x49 } },
+ { .data = { 0x74, 0x44 } },
+ { .data = { 0x75, 0x35 } },
+ { .data = { 0x76, 0x3A } },
+ { .data = { 0x77, 0x23 } },
+ { .data = { 0x78, 0x3D } },
+ { .data = { 0x79, 0x3C } },
+ { .data = { 0x7A, 0x3D } },
+ { .data = { 0x7B, 0x5D } },
+ { .data = { 0x7C, 0x4D } },
+ { .data = { 0x7D, 0x56 } },
+ { .data = { 0x7E, 0x48 } },
+ { .data = { 0x7F, 0x45 } },
+ { .data = { 0x80, 0x38 } },
+ { .data = { 0x81, 0x25 } },
+ { .data = { 0x82, 0x00 } },
+
+ /* Switch to page 2, for GIP */
+ { .data = { 0xE0, 0x02 } },
+
+ { .data = { 0x00, 0x1E } },
+ { .data = { 0x01, 0x1E } },
+ { .data = { 0x02, 0x41 } },
+ { .data = { 0x03, 0x41 } },
+ { .data = { 0x04, 0x43 } },
+ { .data = { 0x05, 0x43 } },
+ { .data = { 0x06, 0x1F } },
+ { .data = { 0x07, 0x1F } },
+ { .data = { 0x08, 0x1F } },
+ { .data = { 0x09, 0x1F } },
+ { .data = { 0x0A, 0x1E } },
+ { .data = { 0x0B, 0x1E } },
+ { .data = { 0x0C, 0x1F } },
+ { .data = { 0x0D, 0x47 } },
+ { .data = { 0x0E, 0x47 } },
+ { .data = { 0x0F, 0x45 } },
+ { .data = { 0x10, 0x45 } },
+ { .data = { 0x11, 0x4B } },
+ { .data = { 0x12, 0x4B } },
+ { .data = { 0x13, 0x49 } },
+ { .data = { 0x14, 0x49 } },
+ { .data = { 0x15, 0x1F } },
+
+ { .data = { 0x16, 0x1E } },
+ { .data = { 0x17, 0x1E } },
+ { .data = { 0x18, 0x40 } },
+ { .data = { 0x19, 0x40 } },
+ { .data = { 0x1A, 0x42 } },
+ { .data = { 0x1B, 0x42 } },
+ { .data = { 0x1C, 0x1F } },
+ { .data = { 0x1D, 0x1F } },
+ { .data = { 0x1E, 0x1F } },
+ { .data = { 0x1F, 0x1f } },
+ { .data = { 0x20, 0x1E } },
+ { .data = { 0x21, 0x1E } },
+ { .data = { 0x22, 0x1f } },
+ { .data = { 0x23, 0x46 } },
+ { .data = { 0x24, 0x46 } },
+ { .data = { 0x25, 0x44 } },
+ { .data = { 0x26, 0x44 } },
+ { .data = { 0x27, 0x4A } },
+ { .data = { 0x28, 0x4A } },
+ { .data = { 0x29, 0x48 } },
+ { .data = { 0x2A, 0x48 } },
+ { .data = { 0x2B, 0x1f } },
+
+ { .data = { 0x2C, 0x1F } },
+ { .data = { 0x2D, 0x1F } },
+ { .data = { 0x2E, 0x42 } },
+ { .data = { 0x2F, 0x42 } },
+ { .data = { 0x30, 0x40 } },
+ { .data = { 0x31, 0x40 } },
+ { .data = { 0x32, 0x1E } },
+ { .data = { 0x33, 0x1E } },
+ { .data = { 0x34, 0x1F } },
+ { .data = { 0x35, 0x1F } },
+ { .data = { 0x36, 0x1E } },
+ { .data = { 0x37, 0x1E } },
+ { .data = { 0x38, 0x1F } },
+ { .data = { 0x39, 0x48 } },
+ { .data = { 0x3A, 0x48 } },
+ { .data = { 0x3B, 0x4A } },
+ { .data = { 0x3C, 0x4A } },
+ { .data = { 0x3D, 0x44 } },
+ { .data = { 0x3E, 0x44 } },
+ { .data = { 0x3F, 0x46 } },
+ { .data = { 0x40, 0x46 } },
+ { .data = { 0x41, 0x1F } },
+
+ { .data = { 0x42, 0x1F } },
+ { .data = { 0x43, 0x1F } },
+ { .data = { 0x44, 0x43 } },
+ { .data = { 0x45, 0x43 } },
+ { .data = { 0x46, 0x41 } },
+ { .data = { 0x47, 0x41 } },
+ { .data = { 0x48, 0x1E } },
+ { .data = { 0x49, 0x1E } },
+ { .data = { 0x4A, 0x1E } },
+ { .data = { 0x4B, 0x1F } },
+ { .data = { 0x4C, 0x1E } },
+ { .data = { 0x4D, 0x1E } },
+ { .data = { 0x4E, 0x1F } },
+ { .data = { 0x4F, 0x49 } },
+ { .data = { 0x50, 0x49 } },
+ { .data = { 0x51, 0x4B } },
+ { .data = { 0x52, 0x4B } },
+ { .data = { 0x53, 0x45 } },
+ { .data = { 0x54, 0x45 } },
+ { .data = { 0x55, 0x47 } },
+ { .data = { 0x56, 0x47 } },
+ { .data = { 0x57, 0x1F } },
+
+ { .data = { 0x58, 0x10 } },
+ { .data = { 0x59, 0x00 } },
+ { .data = { 0x5A, 0x00 } },
+ { .data = { 0x5B, 0x30 } },
+ { .data = { 0x5C, 0x02 } },
+ { .data = { 0x5D, 0x40 } },
+ { .data = { 0x5E, 0x01 } },
+ { .data = { 0x5F, 0x02 } },
+ { .data = { 0x60, 0x30 } },
+ { .data = { 0x61, 0x01 } },
+ { .data = { 0x62, 0x02 } },
+ { .data = { 0x63, 0x6A } },
+ { .data = { 0x64, 0x6A } },
+ { .data = { 0x65, 0x05 } },
+ { .data = { 0x66, 0x12 } },
+ { .data = { 0x67, 0x74 } },
+ { .data = { 0x68, 0x04 } },
+ { .data = { 0x69, 0x6A } },
+ { .data = { 0x6A, 0x6A } },
+ { .data = { 0x6B, 0x08 } },
+
+ { .data = { 0x6C, 0x00 } },
+ { .data = { 0x6D, 0x04 } },
+ { .data = { 0x6E, 0x04 } },
+ { .data = { 0x6F, 0x88 } },
+ { .data = { 0x70, 0x00 } },
+ { .data = { 0x71, 0x00 } },
+ { .data = { 0x72, 0x06 } },
+ { .data = { 0x73, 0x7B } },
+ { .data = { 0x74, 0x00 } },
+ { .data = { 0x75, 0x07 } },
+ { .data = { 0x76, 0x00 } },
+ { .data = { 0x77, 0x5D } },
+ { .data = { 0x78, 0x17 } },
+ { .data = { 0x79, 0x1F } },
+ { .data = { 0x7A, 0x00 } },
+ { .data = { 0x7B, 0x00 } },
+ { .data = { 0x7C, 0x00 } },
+ { .data = { 0x7D, 0x03 } },
+ { .data = { 0x7E, 0x7B } },
+
+ { .data = { 0xE0, 0x04 } },
+ { .data = { 0x2B, 0x2B } },
+ { .data = { 0x2E, 0x44 } },
+
+ { .data = { 0xE0, 0x01 } },
+ { .data = { 0x0E, 0x01 } },
+
+ { .data = { 0xE0, 0x03 } },
+ { .data = { 0x98, 0x2F } },
+
+ { .data = { 0xE0, 0x00 } },
+ { .data = { 0xE6, 0x02 } },
+ { .data = { 0xE7, 0x02 } },
+
+ { .data = { 0x11, 0x00 } },
+};
+
+static const struct k101_im2ba02_init_cmd timed_cmds[] = {
+ { .data = { 0x29, 0x00 } },
+ { .data = { 0x35, 0x00 } },
+};
+
+static int k101_im2ba02_prepare(struct drm_panel *panel)
+{
+ struct k101_im2ba02 *ctx = panel_to_k101_im2ba02(panel);
+ struct mipi_dsi_device *dsi = ctx->dsi;
+ unsigned int i;
+ int ret;
+
+ ret = regulator_enable(ctx->avdd);
+ if (ret)
+ return ret;
+
+ msleep(20);
+
+ ret = regulator_enable(ctx->dvdd);
+ if (ret)
+ return ret;
+
+ msleep(20);
+
+ ret = regulator_enable(ctx->cvdd);
+ if (ret)
+ return ret;
+
+ msleep(30);
+
+ gpiod_set_value(ctx->reset, 1);
+ msleep(50);
+
+ gpiod_set_value(ctx->reset, 0);
+ msleep(50);
+
+ gpiod_set_value(ctx->reset, 1);
+ msleep(200);
+
+ for (i = 0; i < ARRAY_SIZE(k101_im2ba02_init_cmds); i++) {
+ const struct k101_im2ba02_init_cmd *cmd = &k101_im2ba02_init_cmds[i];
+
+ ret = mipi_dsi_dcs_write_buffer(dsi, cmd->data, K101_IM2BA02_INIT_CMD_LEN);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int k101_im2ba02_enable(struct drm_panel *panel)
+{
+ struct k101_im2ba02 *ctx = panel_to_k101_im2ba02(panel);
+ const struct k101_im2ba02_init_cmd *cmd = &timed_cmds[1];
+ int ret;
+
+ msleep(150);
+
+ ret = mipi_dsi_dcs_set_display_on(ctx->dsi);
+ if (ret < 0)
+ return ret;
+
+ msleep(50);
+
+ return mipi_dsi_dcs_write_buffer(ctx->dsi, cmd->data, K101_IM2BA02_INIT_CMD_LEN);
+ if (ret < 0)
+ return ret;
+}
+
+static int k101_im2ba02_disable(struct drm_panel *panel)
+{
+ struct k101_im2ba02 *ctx = panel_to_k101_im2ba02(panel);
+
+ return mipi_dsi_dcs_set_display_off(ctx->dsi);
+}
+
+static int k101_im2ba02_unprepare(struct drm_panel *panel)
+{
+ struct k101_im2ba02 *ctx = panel_to_k101_im2ba02(panel);
+ int ret;
+
+ ret = mipi_dsi_dcs_set_display_off(ctx->dsi);
+ if (ret < 0)
+ DRM_DEV_ERROR(panel->dev, "failed to set display off: %d\n",
+ ret);
+
+ ret = mipi_dsi_dcs_enter_sleep_mode(ctx->dsi);
+ if (ret < 0)
+ DRM_DEV_ERROR(panel->dev, "failed to enter sleep mode: %d\n",
+ ret);
+
+ msleep(200);
+
+ gpiod_set_value(ctx->reset, 0);
+
+ msleep(20);
+
+ regulator_disable(ctx->cvdd);
+
+ msleep(20);
+
+ regulator_disable(ctx->dvdd);
+
+ msleep(20);
+
+ regulator_disable(ctx->avdd);
+
+ return 0;
+}
+
+static const struct drm_display_mode k101_im2ba02_default_mode = {
+ .clock = 70000,
+ .vrefresh = 60,
+
+ .hdisplay = 800,
+ .hsync_start = 800 + 20,
+ .hsync_end = 800 + 20 + 20,
+ .htotal = 800 + 20 + 20 + 20,
+
+ .vdisplay = 1280,
+ .vsync_start = 1280 + 16,
+ .vsync_end = 1280 + 16 + 4,
+ .vtotal = 1280 + 16 + 4 + 4,
+
+ .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
+ .width_mm = 136,
+ .height_mm = 217,
+};
+
+static int k101_im2ba02_get_modes(struct drm_panel *panel,
+ struct drm_connector *connector)
+{
+ struct k101_im2ba02 *ctx = panel_to_k101_im2ba02(panel);
+ struct drm_display_mode *mode;
+
+ mode = drm_mode_duplicate(connector->dev, &k101_im2ba02_default_mode);
+ if (!mode) {
+ DRM_DEV_ERROR(&ctx->dsi->dev, "failed to add mode %ux%ux@%u\n",
+ k101_im2ba02_default_mode.hdisplay,
+ k101_im2ba02_default_mode.vdisplay,
+ k101_im2ba02_default_mode.vrefresh);
+ return -ENOMEM;
+ }
+
+ drm_mode_set_name(mode);
+
+ mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+ connector->display_info.width_mm = mode->width_mm;
+ connector->display_info.height_mm = mode->height_mm;
+ drm_mode_probed_add(connector, mode);
+
+ return 1;
+}
+
+static const struct drm_panel_funcs k101_im2ba02_funcs = {
+ .disable = k101_im2ba02_disable,
+ .unprepare = k101_im2ba02_unprepare,
+ .prepare = k101_im2ba02_prepare,
+ .enable = k101_im2ba02_enable,
+ .get_modes = k101_im2ba02_get_modes,
+};
+
+static int k101_im2ba02_dsi_probe(struct mipi_dsi_device *dsi)
+{
+ struct k101_im2ba02 *ctx;
+ int ret;
+
+ ctx = devm_kzalloc(&dsi->dev, sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+
+ mipi_dsi_set_drvdata(dsi, ctx);
+ ctx->dsi = dsi;
+
+ ctx->dvdd = devm_regulator_get(&dsi->dev, "dvdd");
+ if (IS_ERR(ctx->dvdd)) {
+ DRM_DEV_ERROR(&dsi->dev, "Couldn't get dvdd regulator\n");
+ return PTR_ERR(ctx->dvdd);
+ }
+
+ ctx->avdd = devm_regulator_get(&dsi->dev, "avdd");
+ if (IS_ERR(ctx->avdd)) {
+ DRM_DEV_ERROR(&dsi->dev, "Couldn't get avdd regulator\n");
+ return PTR_ERR(ctx->avdd);
+ }
+
+ ctx->cvdd = devm_regulator_get(&dsi->dev, "cvdd");
+ if (IS_ERR(ctx->cvdd)) {
+ DRM_DEV_ERROR(&dsi->dev, "Couldn't get cvdd regulator\n");
+ return PTR_ERR(ctx->cvdd);
+ }
+
+ ctx->reset = devm_gpiod_get(&dsi->dev, "reset", GPIOD_OUT_LOW);
+ if (IS_ERR(ctx->reset)) {
+ DRM_DEV_ERROR(&dsi->dev, "Couldn't get our reset GPIO\n");
+ return PTR_ERR(ctx->reset);
+ }
+
+ drm_panel_init(&ctx->panel, &dsi->dev, &k101_im2ba02_funcs,
+ DRM_MODE_CONNECTOR_DSI);
+
+ ret = drm_panel_of_backlight(&ctx->panel);
+ if (ret)
+ return ret;
+
+ ret = drm_panel_add(&ctx->panel);
+ if (ret < 0)
+ return ret;
+
+ dsi->mode_flags = MIPI_DSI_MODE_VIDEO;
+ dsi->format = MIPI_DSI_FMT_RGB888;
+ dsi->lanes = 4;
+
+ ret = mipi_dsi_attach(dsi);
+ if (ret < 0) {
+ drm_panel_remove(&ctx->panel);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int k101_im2ba02_dsi_remove(struct mipi_dsi_device *dsi)
+{
+ struct k101_im2ba02 *ctx = mipi_dsi_get_drvdata(dsi);
+
+ mipi_dsi_detach(dsi);
+ drm_panel_remove(&ctx->panel);
+
+ return 0;
+}
+
+static const struct of_device_id k101_im2ba02_of_match[] = {
+ { .compatible = "feixin,k101-im2ba02", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, k101_im2ba02_of_match);
+
+static struct mipi_dsi_driver k101_im2ba02_driver = {
+ .probe = k101_im2ba02_dsi_probe,
+ .remove = k101_im2ba02_dsi_remove,
+ .driver = {
+ .name = "feixin-k101-im2ba02",
+ .of_match_table = k101_im2ba02_of_match,
+ },
+};
+module_mipi_dsi_driver(k101_im2ba02_driver);
+
+MODULE_AUTHOR("Icenowy Zheng <ice...@aosc.io>");
+MODULE_DESCRIPTION("Feixin K101 IM2BA02 MIPI-DSI LCD panel");
+MODULE_LICENSE("GPL");
--
2.23.0

[Icenowy Zheng]

Add the device tree binding for Pine64's PineTab tablet, which uses
Allwinner A64 SoC.

Signed-off-by: Icenowy Zheng <ice...@aosc.io>
---

Documentation/devicetree/bindings/arm/sunxi.yaml | 5 +++++
1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml
index 327ce6730823..159060b65c5d 100644
--- a/Documentation/devicetree/bindings/arm/sunxi.yaml
+++ b/Documentation/devicetree/bindings/arm/sunxi.yaml
@@ -636,6 +636,11 @@ properties:
- const: pine64,pinebook
- const: allwinner,sun50i-a64

+ - description: Pine64 PineTab
+ items:
+ - const: pine64,pinetab
+ - const: allwinner,sun50i-a64
+
- description: Pine64 SoPine Baseboard
items:
- const: pine64,sopine-baseboard
--
2.23.0

[Icenowy Zheng]

PineTab is a 10.1" tablet by Pine64 with Allwinner A64 inside.

It includes the following peripherals:

USB:
- A microUSB Type-B port connected to the OTG-capable USB PHY of
Allwinner A64. The ID pin is connected to a GPIO of the A64 SoC, and the
Vbus is connected to the Vbus of AXP803 PMIC. These enables OTG
functionality on this port.
- A USB Type-A port is connected to the internal hub attached to the
non-OTG USB PHY of Allwinner A64.
- There are reserved pins for an external keyboard connected to the
internal hub.

Power:
- The microUSB port has its Vbus connected to AXP803, mentioned above.
- A DC jack (of a strange size, 2.5mm outer diameter) is connected to
the ACIN of AXP803.
- A Li-Polymer battery is connected to the battery pins of AXP803.

Storage:
- An tradition Pine64 eMMC slot is on the board, mounted with an eMMC
module by factory.
- An external microSD slot is hidden under a protect case.

Display:
- A MIPI-DSI LCD panel (800x1280) is connected to the DSI port of A64 SoC.
- A mini HDMI port.

Input:
- A touch panel attached to a Goodix GT9271 touch controller.
- Volume keys connected to the LRADC of the A64 SoC.

Camera:
- An OV5640 CMOS camera is at rear, connected to the CSI bus of A64 SoC.
- A GC2145 CMOS camera is at front, shares the same CSI bus with OV5640.

Audio:
- A headphone jack is conencted to the SoC's internal codec.
- A speaker connected is to the Line Out port of SoC's internal codec, via
an amplifier.

Misc:
- Debug UART is muxed with the headphone jack, with the switch next to
the microSD slot.
- A bosch BMA223 accelerometer is connected to the I2C bus of A64 SoC.
- Wi-Fi and Bluetooth are available via a RTL8723CS chip, similar to the
one in Pinebook.

This commit adds a basically usable device tree for it, implementing
most of the features mentioned above. HDMI is not supported now because
bad LCD-HDMI coexistence situation of mainline A64 display driver, and
the front camera currently lacks a driver and a facility to share the
bus with the rear one.

Signed-off-by: Icenowy Zheng <ice...@aosc.io>
---

arch/arm64/boot/dts/allwinner/Makefile | 1 +
.../boot/dts/allwinner/sun50i-a64-pinetab.dts | 461 ++++++++++++++++++
2 files changed, 462 insertions(+)
create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts

diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
index cf4f78617c3f..6dad63881cd3 100644
--- a/arch/arm64/boot/dts/allwinner/Makefile
+++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -9,6 +9,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-orangepi-win.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-lts.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinebook.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinetab.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-teres-i.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-bananapi-m2-plus.dtb
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts
new file mode 100644
index 000000000000..1dfa3668636e
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts
@@ -0,0 +1,461 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Icenowy Zheng <ice...@aosc.xyz>
+ *
+ */
+
+/dts-v1/;
+
+#include "sun50i-a64.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+ model = "PineTab";
+ compatible = "pine64,pinetab", "allwinner,sun50i-a64";
+
+ aliases {
+ serial0 = &uart0;
+ ethernet0 = &rtl8723cs;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+ brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+ default-brightness-level = <8>;
+ enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */
+ power-supply = <&vdd_bl>;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ i2c-csi {
+ compatible = "i2c-gpio";
+ sda-gpios = <&pio 4 13 GPIO_ACTIVE_HIGH>; /* PE13 */
+ scl-gpios = <&pio 4 12 GPIO_ACTIVE_HIGH>; /* PE12 */
+ i2c-gpio,delay-us = <5>;

+ #address-cells = <1>;
+ #size-cells = <0>;
+

+ /* Rear camera */
+ ov5640: camera@3c {
+ compatible = "ovti,ov5640";
+ reg = <0x3c>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&csi_mclk_pin>;
+ clocks = <&ccu CLK_CSI_MCLK>;
+ clock-names = "xclk";
+
+ AVDD-supply = <&reg_dldo3>;
+ DOVDD-supply = <&reg_aldo1>;
+ DVDD-supply = <&reg_eldo3>;
+ reset-gpios = <&pio 4 14 GPIO_ACTIVE_LOW>; /* PE14 */
+ powerdown-gpios = <&pio 4 15 GPIO_ACTIVE_HIGH>; /* PE15 */
+
+ port {
+ ov5640_ep: endpoint {
+ remote-endpoint = <&csi_ep>;
+ bus-width = <8>;
+ hsync-active = <1>; /* Active high */
+ vsync-active = <0>; /* Active low */
+ data-active = <1>; /* Active high */
+ pclk-sample = <1>; /* Rising */
+ };
+ };
+ };
+ };
+
+ speaker_amp: audio-amplifier {
+ compatible = "simple-audio-amplifier";
+ enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+ sound-name-prefix = "Speaker Amp";
+ };
+
+ vdd_bl: regulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "bl-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
+ enable-active-high;
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
+ post-power-on-delay-ms = <200>;
+ };
+};
+
+&codec {
+ status = "okay";
+};
+
+&codec_analog {
+ hpvcc-supply = <&reg_eldo1>;
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&csi {
+ status = "okay";
+
+ port {

+ #address-cells = <1>;
+ #size-cells = <0>;
+

+ csi_ep: endpoint {
+ remote-endpoint = <&ov5640_ep>;
+ bus-width = <8>;
+ hsync-active = <1>; /* Active high */
+ vsync-active = <0>; /* Active low */
+ data-active = <1>; /* Active high */
+ pclk-sample = <1>; /* Rising */
+ };
+ };
+};
+
+&dai {
+ status = "okay";
+};
+
+&de {
+ status = "okay";
+};
+
+&dphy {
+ status = "okay";
+};
+
+&dsi {
+ vcc-dsi-supply = <&reg_dldo1>;

+ #address-cells = <1>;
+ #size-cells = <0>;

+ status = "okay";
+

+ panel@0 {
+ compatible = "feixin,k101-im2ba02";
+ reg = <0>;
+ avdd-supply = <&reg_dc1sw>;
+ dvdd-supply = <&reg_dc1sw>;
+ cvdd-supply = <&reg_ldo_io1>;

+ reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */

+ backlight = <&backlight>;
+ };
+};
+

+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ status = "okay";
+
+ touchscreen@5d {
+ compatible = "goodix,gt9271";
+ reg = <0x5d>;
+ interrupt-parent = <&pio>;
+ interrupts = <7 4 IRQ_TYPE_LEVEL_HIGH>; /* PH4 */
+ irq-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ reset-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */
+ AVDD28-supply = <&reg_ldo_io1>;
+ };
+};
+
+&i2c0_pins {
+ bias-pull-up;
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+ status = "okay";
+
+ bma223@18 {
+ compatible = "bosch,bma223", "bosch,bma222e";
+ reg = <0x18>;
+ interrupt-parent = <&pio>;
+ interrupts = <7 5 IRQ_TYPE_LEVEL_HIGH>; /* PH5 */
+ mount-matrix = "0", "-1", "0",
+ "-1", "0", "0",
+ "0", "0", "-1";
+ };
+};
+
+&lradc {
+ vref-supply = <&reg_aldo3>;
+ status = "okay";
+
+ button-200 {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ channel = <0>;
+ voltage = <200000>;
+ };
+
+ button-400 {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ channel = <0>;
+ voltage = <400000>;
+ };
+};
+
+&mixer1 {
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>;
+ vmmc-supply = <&reg_dcdc1>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+ disable-wp;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ vmmc-supply = <&reg_dldo4>;
+ vqmmc-supply = <&reg_eldo1>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ rtl8723cs: wifi@1 {
+ reg = <1>;
+ };
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins>;
+ vmmc-supply = <&reg_dcdc1>;
+ vqmmc-supply = <&reg_dcdc1>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-hw-reset;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&pwm {
+ status = "okay";
+};
+
+&r_rsb {
+ status = "okay";
+
+ axp803: pmic@3a3 {
+ compatible = "x-powers,axp803";
+ reg = <0x3a3>;
+ interrupt-parent = <&r_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ x-powers,drive-vbus-en;
+ };
+};
+
+#include "axp803.dtsi"
+
+&ac_power_supply {
+ status = "okay";
+};
+
+&battery_power_supply {
+ status = "okay";
+};
+
+&reg_aldo1 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-name = "dovdd-csi";
+};
+
+&reg_aldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-pl";
+};
+
+&reg_aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dc1sw {
+ regulator-name = "vcc-lcd";
+};
+
+&reg_dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+&reg_dcdc5 {
+ regulator-always-on;
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+ regulator-always-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-hdmi-dsi-sensor";
+};
+
+&reg_dldo3 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-name = "avdd-csi";
+};
+
+&reg_dldo4 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi";
+};
+
+&reg_drivevbus {
+ regulator-name = "usb0-vbus";
+ status = "okay";
+};
+
+&reg_eldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "cpvdd";
+};
+
+&reg_eldo2 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcca-1v8";
+};
+
+&reg_eldo3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "dvdd-1v8-csi";
+};
+
+&reg_fldo1 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-name = "vcc-1v2-hsic";
+};
+
+&reg_fldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-name = "vdd-cpus";
+};
+
+&reg_ldo_io0 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-usb";
+ status = "okay";
+};
+
+&reg_ldo_io1 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <3500000>;
+ regulator-name = "vcc-touchscreen";
+ status = "okay";
+};
+
+&reg_rtc_ldo {
+ regulator-name = "vcc-rtc";
+};
+
+&sound {
+ status = "okay";
+ simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>;
+ simple-audio-card,widgets = "Microphone", "Internal Microphone Left",
+ "Microphone", "Internal Microphone Right",
+ "Headphone", "Headphone Jack",
+ "Speaker", "Internal Speaker";
+ simple-audio-card,routing =
+ "Left DAC", "AIF1 Slot 0 Left",
+ "Right DAC", "AIF1 Slot 0 Right",
+ "Speaker Amp INL", "LINEOUT",
+ "Speaker Amp INR", "LINEOUT",
+ "Internal Speaker", "Speaker Amp OUTL",
+ "Internal Speaker", "Speaker Amp OUTR",
+ "Headphone Jack", "HP",
+ "AIF1 Slot 0 Left ADC", "Left ADC",
+ "AIF1 Slot 0 Right ADC", "Right ADC",
+ "Internal Microphone Left", "MBIAS",
+ "MIC1", "Internal Microphone Left",
+ "Internal Microphone Right", "HBIAS",
+ "MIC2", "Internal Microphone Right";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pb_pins>;
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usb_power_supply {
+ status = "okay";
+};
+
+&usbphy {
+ usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
+ usb0_vbus_power-supply = <&usb_power_supply>;
+ usb0_vbus-supply = <&reg_drivevbus>;
+ usb1_vbus-supply = <&reg_ldo_io0>;
+ status = "okay";
+};
--
2.23.0

[Vasily Khoruzhick]

You may want to include dtsi with OPP for A64 here if you want to enable DVFS

I believe you need CPU regulator for each CPU. I'm aware that we share
clock and regulator for all the CPUs but what would happen if you put
CPU0 offline?

> --
> You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi...@googlegroups.com.
> To view this discussion on the web, visit https://groups.google.com/d/msgid/linux-sunxi/20200110155225.1051749-6-icenowy%40aosc.io.

[Rob Herring]

On Fri, 10 Jan 2020 23:52:21 +0800, Icenowy Zheng wrote:
> Shenzhen Feixin Photoelectics Co., Ltd is a company to provide LCD
> modules.
>
> Add its vendor prefix.
>
> Signed-off-by: Icenowy Zheng <ice...@aosc.io>
> ---
> Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
> 1 file changed, 2 insertions(+)
>

Acked-by: Rob Herring <ro...@kernel.org>

[Rob Herring]

On Fri, 10 Jan 2020 23:52:24 +0800, Icenowy Zheng wrote:
> Add the device tree binding for Pine64's PineTab tablet, which uses
> Allwinner A64 SoC.
>
> Signed-off-by: Icenowy Zheng <ice...@aosc.io>
> ---
> Documentation/devicetree/bindings/arm/sunxi.yaml | 5 +++++
> 1 file changed, 5 insertions(+)
>

Reviewed-by: Rob Herring <ro...@kernel.org>

[Icenowy Zheng]

This patchset tries to add support for the PineTab tablet from Pine64.

As it uses a specific MIPI-DSI panel, the support of the panel should be
introduced first, with its DT binding.

Then a device tree is added. Compared to v1 of the patchset, the
accelerometer support is temporarily removed because a DT binding is
lacked (although a proper driver exists).

Icenowy Zheng (5):
dt-bindings: vendor-prefix: add Shenzhen Feixin Photoelectics Co., Ltd
dt-bindings: panel: add Feixin K101 IM2BA02 MIPI-DSI panel
drm/panel: Add Feixin K101 IM2BA02 panel
dt-bindings: arm: sunxi: add binding for PineTab tablet
arm64: dts: allwinner: a64: add support for PineTab

.../devicetree/bindings/arm/sunxi.yaml | 5 +

.../display/panel/feixin,k101-im2ba02.yaml | 55 ++

.../devicetree/bindings/vendor-prefixes.yaml | 2 +
MAINTAINERS | 6 +
arch/arm64/boot/dts/allwinner/Makefile | 1 +

.../boot/dts/allwinner/sun50i-a64-pinetab.dts | 460 +++++++++++++++

drivers/gpu/drm/panel/Kconfig | 9 +
drivers/gpu/drm/panel/Makefile | 1 +

.../gpu/drm/panel/panel-feixin-k101-im2ba02.c | 526 ++++++++++++++++++
9 files changed, 1065 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/feixin,k101-im2ba02.yaml

[Icenowy Zheng]

Shenzhen Feixin Photoelectics Co., Ltd is a company to provide LCD
modules.

Add its vendor prefix.

Signed-off-by: Icenowy Zheng <ice...@aosc.io>

Acked-by: Sam Ravnborg <s...@ravnborg.org>
Acked-by: Rob Herring <ro...@kernel.org>
---
Changes in v2:
- Added ACKs from Sam and Rob.

Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 97c0a06b35cd..07d52254427b 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -337,6 +337,8 @@ patternProperties:

[Icenowy Zheng]

Feixin K101 IM2BA02 is a 10.1" 800x1280 4-lane MIPI-DSI panel.

Add device tree binding for it.

Signed-off-by: Icenowy Zheng <ice...@aosc.io>
---
Changes in v2:
- Set backlight property to optional. (Technically this panel requires
backlight, but theortically it can be not adjustable.)
- Tweaked the example to pass schema check.

.../display/panel/feixin,k101-im2ba02.yaml | 55 +++++++++++++++++++
1 file changed, 55 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/feixin,k101-im2ba02.yaml

diff --git a/Documentation/devicetree/bindings/display/panel/feixin,k101-im2ba02.yaml b/Documentation/devicetree/bindings/display/panel/feixin,k101-im2ba02.yaml
new file mode 100644
index 000000000000..be1ecce9c3c6
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/feixin,k101-im2ba02.yaml
@@ -0,0 +1,55 @@

+ - avdd-supply
+ - dvdd-supply
+ - cvdd-supply
+
+additionalProperties: false
+
+examples:
+ - |

+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {

+ #address-cells = <1>;
+ #size-cells = <0>;

+ panel@0 {
+ compatible = "feixin,k101-im2ba02";
+ reg = <0>;
+ avdd-supply = <&reg_dc1sw>;
+ dvdd-supply = <&reg_dc1sw>;
+ cvdd-supply = <&reg_ldo_io1>;
+ reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>;

+ backlight = <&backlight>;
+ };
+ };
+

+...
--
2.23.0

[Icenowy Zheng]

Feixin K101 IM2BA02 is a 800x1280 4-lane MIPI-DSI LCD panel.

Add a panel driver for it.

Signed-off-by: Icenowy Zheng <ice...@aosc.io>
---
Changes in v2:

- Use regulator_bulk.
- Small code fixes.

MAINTAINERS | 6 +

drivers/gpu/drm/panel/Kconfig | 9 +
drivers/gpu/drm/panel/Makefile | 1 +
.../gpu/drm/panel/panel-feixin-k101-im2ba02.c | 526 ++++++++++++++++++

4 files changed, 542 insertions(+)

create mode 100644 drivers/gpu/drm/panel/panel-feixin-k101-im2ba02.c

diff --git a/MAINTAINERS b/MAINTAINERS

index 98cf0b034f61..2ec9ae62478a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5251,6 +5251,12 @@ T: git git://anongit.freedesktop.org/drm/drm-misc

new file mode 100644
index 000000000000..fddbfddf6566
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-feixin-k101-im2ba02.c
@@ -0,0 +1,526 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*

+ * Copyright (C) 2019-2020 Icenowy Zheng <ice...@aosc.io>
+ */
+
+#include <linux/gpio/consumer.h>
+#include <linux/delay.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regulator/consumer.h>
+
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_print.h>
+
+#define K101_IM2BA02_INIT_CMD_LEN 2
+

+static const char * const regulator_names[] = {
+ "dvdd",
+ "avdd",
+ "cvdd"
+};

+
+struct k101_im2ba02 {
+ struct drm_panel panel;
+ struct mipi_dsi_device *dsi;
+

+ struct regulator_bulk_data supplies[ARRAY_SIZE(regulator_names)];

+ ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies);

+ if (ret)
+ return ret;
+
+ msleep(30);
+
+ gpiod_set_value(ctx->reset, 1);
+ msleep(50);
+
+ gpiod_set_value(ctx->reset, 0);
+ msleep(50);
+
+ gpiod_set_value(ctx->reset, 1);
+ msleep(200);
+
+ for (i = 0; i < ARRAY_SIZE(k101_im2ba02_init_cmds); i++) {
+ const struct k101_im2ba02_init_cmd *cmd = &k101_im2ba02_init_cmds[i];
+
+ ret = mipi_dsi_dcs_write_buffer(dsi, cmd->data, K101_IM2BA02_INIT_CMD_LEN);
+ if (ret < 0)

+ goto powerdown;

+ }
+
+ return 0;
+

+powerdown:

+ gpiod_set_value(ctx->reset, 0);
+ msleep(50);
+

+ return regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);

+}
+
+static int k101_im2ba02_enable(struct drm_panel *panel)
+{
+ struct k101_im2ba02 *ctx = panel_to_k101_im2ba02(panel);
+ const struct k101_im2ba02_init_cmd *cmd = &timed_cmds[1];
+ int ret;
+
+ msleep(150);
+
+ ret = mipi_dsi_dcs_set_display_on(ctx->dsi);
+ if (ret < 0)
+ return ret;
+
+ msleep(50);
+
+ return mipi_dsi_dcs_write_buffer(ctx->dsi, cmd->data, K101_IM2BA02_INIT_CMD_LEN);
+}

+ msleep(20);
+
+ return regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);

+ unsigned int i;
+ int ret;
+

+ ctx = devm_kzalloc(&dsi->dev, sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+
+ mipi_dsi_set_drvdata(dsi, ctx);
+ ctx->dsi = dsi;
+

+ for (i = 0; i < ARRAY_SIZE(ctx->supplies); i++)
+ ctx->supplies[i].supply = regulator_names[i];
+
+ ret = devm_regulator_bulk_get(&dsi->dev, ARRAY_SIZE(ctx->supplies),
+ ctx->supplies);
+ if (ret < 0) {
+ DRM_DEV_ERROR(&dsi->dev, "Couldn't get regulators\n");

+ return ret;
+ }
+

+ { /* sentinel */ }

[Icenowy Zheng]

Add the device tree binding for Pine64's PineTab tablet, which uses
Allwinner A64 SoC.

Signed-off-by: Icenowy Zheng <ice...@aosc.io>

Reviewed-by: Rob Herring <ro...@kernel.org>
---
Changes in v2:
- Added Review tag by Rob.

Documentation/devicetree/bindings/arm/sunxi.yaml | 5 +++++
1 file changed, 5 insertions(+)

[Icenowy Zheng]

bad LCD-HDMI coexistence situation of mainline A64 display driver, the

front camera currently lacks a driver and a facility to share the bus

with the rear one, and the accelerometer currently lacks a DT binding.

Signed-off-by: Icenowy Zheng <ice...@aosc.io>
---
Changes in v2:
- Remove I2C pinmuxes.
- Dropped binding-less accelerometer.
- Used exponent curve for backlight.

arch/arm64/boot/dts/allwinner/Makefile | 1 +
.../boot/dts/allwinner/sun50i-a64-pinetab.dts | 460 ++++++++++++++++++
2 files changed, 461 insertions(+)

create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts

diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
index cf4f78617c3f..6dad63881cd3 100644
--- a/arch/arm64/boot/dts/allwinner/Makefile
+++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -9,6 +9,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-orangepi-win.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-lts.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinebook.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinetab.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-teres-i.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-bananapi-m2-plus.dtb
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts

new file mode 100644
index 000000000000..c76c94855f43
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts
@@ -0,0 +1,460 @@

+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)

+/*

+ * Copyright (C) 2019 Icenowy Zheng <ice...@aosc.xyz>
+ *
+ */
+
+/dts-v1/;
+
+#include "sun50i-a64.dtsi"

+#include "sun50i-a64-cpu-opp.dtsi"

+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+ model = "PineTab";
+ compatible = "pine64,pinetab", "allwinner,sun50i-a64";
+
+ aliases {
+ serial0 = &uart0;
+ ethernet0 = &rtl8723cs;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;

+ brightness-levels = <0 16 18 20 22 24 26 29 32 35 38 42 46 51 56 62 68 75 83 91 100>;
+ default-brightness-level = <15>;

+ enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */
+ power-supply = <&vdd_bl>;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ i2c-csi {
+ compatible = "i2c-gpio";
+ sda-gpios = <&pio 4 13 GPIO_ACTIVE_HIGH>; /* PE13 */
+ scl-gpios = <&pio 4 12 GPIO_ACTIVE_HIGH>; /* PE12 */
+ i2c-gpio,delay-us = <5>;

+ #address-cells = <1>;
+ #size-cells = <0>;
+

+
+&cpu1 {

+ cpu-supply = <&reg_dcdc2>;
+};

+
+&cpu2 {

+ cpu-supply = <&reg_dcdc2>;
+};

+
+&cpu3 {

+ cpu-supply = <&reg_dcdc2>;
+};

+
+&csi {
+ status = "okay";
+
+ port {

+ #address-cells = <1>;
+ #size-cells = <0>;
+

+ status = "okay";
+

+ panel@0 {
+ compatible = "feixin,k101-im2ba02";
+ reg = <0>;
+ avdd-supply = <&reg_dc1sw>;
+ dvdd-supply = <&reg_dc1sw>;
+ cvdd-supply = <&reg_ldo_io1>;

+ reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */

+ backlight = <&backlight>;
+ };
+};
+

+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&i2c0 {

+ status = "okay";
+
+ touchscreen@5d {
+ compatible = "goodix,gt9271";
+ reg = <0x5d>;
+ interrupt-parent = <&pio>;
+ interrupts = <7 4 IRQ_TYPE_LEVEL_HIGH>; /* PH4 */
+ irq-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ reset-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */
+ AVDD28-supply = <&reg_ldo_io1>;
+ };
+};
+
+&i2c0_pins {
+ bias-pull-up;
+};
+
+&i2c1 {

+ status = "okay";
+

+ /* TODO: add Bochs BMA223 accelerometer here */