Hi Leif.
Yes WinUSB.
I checked Zadig again and the wrong driver was in place and this time I had no trouble putting WinUSB in place.
There is no second driver needed, I have Linrad going now. The sensitivity is poor. I have not fully explored my options yet.
My noise rise from dummy load to noise on the horizon should be 15 or 20db but it is more like 5db. I'll either need to find more
gain in the dongle or add a preamp. I DID find the gain selector under the frequency selector box. I selected Linearity mode.
If I point the array on vertical toward a 144.39 packet station the noise drops a lot when it is transmitting.
I just need to play around with it some more, but I have a start now. This evening I copy some stations on 10 meters on an indoor antenna.
Thank you for the videos. That was helpful.
WB9UWA