Lasersaur Logo

[matthew abbondanzio]

So I was looking for a version of the logo that I could laser cut and couldn't find one.  So a while ago I traced the lasersaur logo and created an SVG so I could burn a logo on a keychain for our keys.  If anyone wants it I have attached it so you can burn it for plaques, tags etc...

Enjoy!

[Steve Baker]

You should have asked first!

The logo is one of the test patterns for the machine...it's in the
"Library" section.

-- Steve

> --
> You received this message because you are subscribed to the Google Groups
> "lasersaur" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to lasersaur+...@googlegroups.com.
> To post to this group, send email to lase...@googlegroups.com.
> Visit this group at http://groups.google.com/group/lasersaur.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/lasersaur/CALyZyGDM66fLQV-KzzNVA%3DuegMSKYk%2BxKqwszEts7Z8%2BtoCXUA%40mail.gmail.com.
> For more options, visit https://groups.google.com/d/optout.
>


-- Steve

[Stefan Hechenberger]

Hi matt, trace looks decent. I am always happy when people just do and share. It's a good tendency in an open source community ;)

If you care for the original vector path I've attached some SVGs.

Best,

--- Stefan Hechenberger studio: Nortd Labs - labs.nortd.com project: Lasersaur - www.lasersaur.com

You received this message because you are subscribed to the Google Groups "lasersaur" group. To unsubscribe from this group and stop receiving emails from it, send an email to lasersaur+...@googlegroups.com. To post to this group, send email to lase...@googlegroups.com. Visit this group at http://groups.google.com/group/lasersaur. To view this discussion on the web visit https://groups.google.com/d/msgid/lasersaur/35f6c6bf0b47b8fea4ccb0235468595f.squirrel%40webmail.sjbaker.org. For more options, visit https://groups.google.com/d/optout.