PiHPSDR mk2 controller power off
88 views
Skip to first unread message
Jonas Sanamon
Oct 28, 2020, 1:13:06 PM10/28/20
to Hermes-Lite
Hi all,
I've built a mk2 controller, and I can power on the controller+RPi4 using the power button on the controller, but I cannot power down using the same.
Looking at the schematic I cannot see how the power button could do so, am i missing something?
Regards,
Jonas - SM4VEY
Sid Boyce
Oct 28, 2020, 5:34:50 PM10/28/20
to herme...@googlegroups.com
Hi Jonas,
I use the menu to shutdown but the PiHPSDR v2 still has power until I
press the power off button.
To power on again I have to first power down and up again using the button.
May be that's the way as it's the same on both of my units.
73 ... Sid.
On 28/10/2020 17:12, Jonas Sanamon wrote:
> Hi all,
>
> I've built a mk2 controller, and I can power on the controller+RPi4
> You received this message because you are subscribed to the Google
> Groups "Hermes-Lite" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to hermes-lite...@googlegroups.com
> <mailto:hermes-lite...@googlegroups.com>.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/hermes-lite/CAABBs1U%2B8Bs9m%2BbUcuTX8nnxTm2yFfSrLRO%2BPoRGyyTHY5-uew%40mail.gmail.com
> <https://groups.google.com/d/msgid/hermes-lite/CAABBs1U%2B8Bs9m%2BbUcuTX8nnxTm2yFfSrLRO%2BPoRGyyTHY5-uew%40mail.gmail.com?utm_medium=email&utm_source=footer>.
--
Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
Senior Staff Specialist, Cricket Coach
Microsoft Windows Free Zone - Linux used for all Computing Tasks
I use the menu to shutdown but the PiHPSDR v2 still has power until I
press the power off button.
To power on again I have to first power down and up again using the button.
May be that's the way as it's the same on both of my units.
73 ... Sid.
On 28/10/2020 17:12, Jonas Sanamon wrote:
> Hi all,
>
> I've built a mk2 controller, and I can power on the controller+RPi4
> using the power button on the controller, but I cannot power down
> using the same.
> Looking at the schematic I cannot see how the power button could do
> using the same.
> so, am i missing something?
>
> Regards,
> Jonas - SM4VEY
> --
>
> Regards,
> Jonas - SM4VEY
> You received this message because you are subscribed to the Google
> Groups "Hermes-Lite" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to hermes-lite...@googlegroups.com
> <mailto:hermes-lite...@googlegroups.com>.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/hermes-lite/CAABBs1U%2B8Bs9m%2BbUcuTX8nnxTm2yFfSrLRO%2BPoRGyyTHY5-uew%40mail.gmail.com
> <https://groups.google.com/d/msgid/hermes-lite/CAABBs1U%2B8Bs9m%2BbUcuTX8nnxTm2yFfSrLRO%2BPoRGyyTHY5-uew%40mail.gmail.com?utm_medium=email&utm_source=footer>.
--
Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
Senior Staff Specialist, Cricket Coach
Microsoft Windows Free Zone - Linux used for all Computing Tasks
Jonas Sanamon
Oct 29, 2020, 3:22:41 AM10/29/20
to Hermes-Lite
Hi Sid,
Thanks. So if I understand You correctly, after You have shut down the Rpi using menu->shutdown you can power it off using the power button on the controller?
For some reason, I can only power up using the button, but pressing the button while power is on has no effect.
I'm trying to understand if this is as designed or if there is something off with my build.
Regards, Jonas
To unsubscribe from this group and stop receiving emails from it, send an email to hermes-lite...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/hermes-lite/bc645b25-31fc-b977-bcbd-bf95b5dc3bae%40gmail.com.
Sid Boyce
Oct 29, 2020, 10:53:21 AM10/29/20
to herme...@googlegroups.com
Hi Jonas,
On the PiHPSDR v2 .... Menu --> Exit piHPSDR --> Shutdown
pihpsdr closes but there is still the power LED on and Ethernet port
active, also another LED on the Pi4.
From there you can't power on.
Pressing and holding in the Power switch causes everything to power down.
After that the Power switch restores power and the Pi4 boots up.
73 ... Sid.
On 29/10/2020 07:22, Jonas Sanamon wrote:
> Hi Sid,
>
> Thanks. So if I understand You correctly, after You have shut down the
> Rpi using menu->shutdown you can power it off using the power button
> on the controller?Â
> > <mailto:hermes-lite...@googlegroups.com
> <mailto:hermes-lite%2Bunsu...@googlegroups.com>>.
> <https://groups.google.com/d/msgid/hermes-lite/bc645b25-31fc-b977-bcbd-bf95b5dc3bae%40gmail.com>.
> <https://groups.google.com/d/msgid/hermes-lite/CAABBs1VmUQ4QcTHO2jL2HqQcGtaXrpD_%2BVOJC9pN4V1u9mLaeg%40mail.gmail.com?utm_medium=email&utm_source=footer>.
On the PiHPSDR v2 .... Menu --> Exit piHPSDR --> Shutdown
pihpsdr closes but there is still the power LED on and Ethernet port
active, also another LED on the Pi4.
From there you can't power on.
Pressing and holding in the Power switch causes everything to power down.
After that the Power switch restores power and the Pi4 boots up.
73 ... Sid.
On 29/10/2020 07:22, Jonas Sanamon wrote:
> Hi Sid,
>
> Thanks. So if I understand You correctly, after You have shut down the
> Rpi using menu->shutdown you can power it off using the power button
>
> For some reason, I can only power up using the button, but pressing
> the button while power is on has no effect.
> I'm trying to understand if this is as designed or if there is
> something off with my build.
>
> Regards, Jonas
>
>
> Den ons 28 okt. 2020 kl 22:34 skrev Sid Boyce <boyc...@gmail.com
> <mailto:boyc...@gmail.com>>:
> For some reason, I can only power up using the button, but pressing
> the button while power is on has no effect.
> I'm trying to understand if this is as designed or if there is
> something off with my build.
>
> Regards, Jonas
>
>
> Den ons 28 okt. 2020 kl 22:34 skrev Sid Boyce <boyc...@gmail.com
>
> Hi Jonas,
> I use the menu to shutdown but the PiHPSDR v2 still has power until I
> press the power off button.
> To power on again I have to first power down and up again using
> the button.
>
> May be that's the way as it's the same on both of my units.
> 73 ... Sid.
>
> On 28/10/2020 17:12, Jonas Sanamon wrote:
> > Hi all,
> >
> > I've built a mk2 controller, and I can power on the
> Hi Jonas,
> I use the menu to shutdown but the PiHPSDR v2 still has power until I
> press the power off button.
> To power on again I have to first power down and up again using
> the button.
>
> May be that's the way as it's the same on both of my units.
> 73 ... Sid.
>
> On 28/10/2020 17:12, Jonas Sanamon wrote:
> > Hi all,
> >
> controller+RPi4
> > using the power button on the controller, but I cannot power down
> > using the same.
> > Looking at the schematic I cannot see how the power button
> > using the power button on the controller, but I cannot power down
> > using the same.
> could do
> > so, am i missing something?
> >
> > Regards,
> > Jonas - SM4VEY
> > --
> > You received this message because you are subscribed to the Google
> > Groups "Hermes-Lite" group.
> > To unsubscribe from this group and stop receiving emails from
> it, send
> > an email to hermes-lite...@googlegroups.com
> <mailto:hermes-lite%2Bunsu...@googlegroups.com>
> > so, am i missing something?
> >
> > Regards,
> > Jonas - SM4VEY
> > --
> > You received this message because you are subscribed to the Google
> > Groups "Hermes-Lite" group.
> > To unsubscribe from this group and stop receiving emails from
> it, send
> > an email to hermes-lite...@googlegroups.com
> > <mailto:hermes-lite...@googlegroups.com
> <mailto:hermes-lite%2Bunsu...@googlegroups.com>>.
> > To view this discussion on the web visit
> >
> https://groups.google.com/d/msgid/hermes-lite/CAABBs1U%2B8Bs9m%2BbUcuTX8nnxTm2yFfSrLRO%2BPoRGyyTHY5-uew%40mail.gmail.com
> <https://groups.google.com/d/msgid/hermes-lite/CAABBs1U%2B8Bs9m%2BbUcuTX8nnxTm2yFfSrLRO%2BPoRGyyTHY5-uew%40mail.gmail.com>
>
> >
> <https://groups.google.com/d/msgid/hermes-lite/CAABBs1U%2B8Bs9m%2BbUcuTX8nnxTm2yFfSrLRO%2BPoRGyyTHY5-uew%40mail.gmail.com?utm_medium=email&utm_source=footer
> >
> https://groups.google.com/d/msgid/hermes-lite/CAABBs1U%2B8Bs9m%2BbUcuTX8nnxTm2yFfSrLRO%2BPoRGyyTHY5-uew%40mail.gmail.com
> <https://groups.google.com/d/msgid/hermes-lite/CAABBs1U%2B8Bs9m%2BbUcuTX8nnxTm2yFfSrLRO%2BPoRGyyTHY5-uew%40mail.gmail.com>
>
> >
> <https://groups.google.com/d/msgid/hermes-lite/CAABBs1U%2B8Bs9m%2BbUcuTX8nnxTm2yFfSrLRO%2BPoRGyyTHY5-uew%40mail.gmail.com?utm_medium=email&utm_source=footer>>.
>
>
> --
> Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
> Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
> Senior Staff Specialist, Cricket Coach
> Microsoft Windows Free Zone - Linux used for all Computing Tasks
>
> --
> You received this message because you are subscribed to the Google
> Groups "Hermes-Lite" group.
> To unsubscribe from this group and stop receiving emails from it,
> send an email to hermes-lite...@googlegroups.com
> <mailto:hermes-lite%2Bunsu...@googlegroups.com>.
>
>
> --
> Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
> Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
> Senior Staff Specialist, Cricket Coach
> Microsoft Windows Free Zone - Linux used for all Computing Tasks
>
> --
> You received this message because you are subscribed to the Google
> Groups "Hermes-Lite" group.
> To unsubscribe from this group and stop receiving emails from it,
> send an email to hermes-lite...@googlegroups.com
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/hermes-lite/bc645b25-31fc-b977-bcbd-bf95b5dc3bae%40gmail.com
> <https://groups.google.com/d/msgid/hermes-lite/bc645b25-31fc-b977-bcbd-bf95b5dc3bae%40gmail.com>.
>
> --
> You received this message because you are subscribed to the Google
> Groups "Hermes-Lite" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to hermes-lite...@googlegroups.com
> <mailto:hermes-lite...@googlegroups.com>.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/hermes-lite/CAABBs1VmUQ4QcTHO2jL2HqQcGtaXrpD_%2BVOJC9pN4V1u9mLaeg%40mail.gmail.com
> --
> You received this message because you are subscribed to the Google
> Groups "Hermes-Lite" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to hermes-lite...@googlegroups.com
> <mailto:hermes-lite...@googlegroups.com>.
> To view this discussion on the web visit
> <https://groups.google.com/d/msgid/hermes-lite/CAABBs1VmUQ4QcTHO2jL2HqQcGtaXrpD_%2BVOJC9pN4V1u9mLaeg%40mail.gmail.com?utm_medium=email&utm_source=footer>.
Jonas Sanamon
Oct 29, 2020, 12:13:17 PM10/29/20
to Hermes-Lite
Thanks Sid,
As I suspected then there is something strange with my power button as I cannot power off regardless of how long I hold the controller's power button, the LED stays on. The only way for me to turn off is to remove power.
I need to look into the schematic to understand the mono-stable T1/T2 configuration in order to understand what the problem is I guess...
Regards, Jonas
To unsubscribe from this group and stop receiving emails from it, send an email to hermes-lite...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/hermes-lite/039bd9de-5de5-e21a-a2bd-2174262de575%40gmail.com.
Sid Boyce
Oct 29, 2020, 12:30:30 PM10/29/20
to herme...@googlegroups.com
Hi Jonas,
I had some problems with the PCB's I got from JLCPCB, tracks missing.
IC1 pins 15, 16 and 17 on one PCB were not connected so I had to bridge
them and wire to GND.
On another the GND was missing on the BAND- switch.
One board would not power up, looked like misrouted traces.
Others ordering later reported their PCB's were fine.
73 ... Sid.
On 29/10/2020 16:13, Jonas Sanamon wrote:
> Thanks Sid,
> configuration in order to understand what the problem is IÂ guess...
> <mailto:boyc...@gmail.com>>:
>
> Â From there you can't power on.
> >
> >Â Â Â Hi Jonas,
> >Â Â Â I use the menu to shutdown but the PiHPSDR v2 still has
> power until I
> >Â Â Â press the power off button.
> >Â Â Â To power on again I have to first power down and up again
> using
> >Â Â Â the button.
> >
> >Â Â Â May be that's the way as it's the same on both of my units.
> >Â Â Â 73 ... Sid.
> >
> >Â Â Â On 28/10/2020 17:12, Jonas Sanamon wrote:
> >Â Â Â > Hi all,
> >Â Â Â >
> >   > I've built a mk2 controller, and I can power on the
> >Â Â Â controller+RPi4
> >Â Â Â > using the power button on the controller, but I cannot
> power down
> >Â Â Â > using the same.
> >   > Looking at the schematic I cannot see how the
> power button
> >Â Â Â could do
> >Â Â Â > so, am i missing something?
> >Â Â Â >
> >Â Â Â > Regards,
> >Â Â Â > Jonas - SM4VEY
> >Â Â Â > --
> >Â Â Â > You received this message because you are subscribed to
> the Google
> >Â Â Â > Groups "Hermes-Lite" group.
> >Â Â Â > To unsubscribe from this group and stop receiving
> emails from
> >Â Â Â it, send
> >Â Â Â > an email to hermes-lite...@googlegroups.com
> <mailto:hermes-lite%2Bunsu...@googlegroups.com>
> >Â Â Â <mailto:hermes-lite%2Bunsu...@googlegroups.com
> <mailto:hermes-lite%252Buns...@googlegroups.com>>
> >Â Â Â > <mailto:hermes-lite...@googlegroups.com
> <mailto:hermes-lite%2Bunsu...@googlegroups.com>
> >Â Â Â <mailto:hermes-lite%2Bunsu...@googlegroups.com
> <mailto:hermes-lite%252Buns...@googlegroups.com>>>.
> >Â Â Â > To view this discussion on the web visit
> >Â Â Â >
> >Â Â Â
> https://groups.google.com/d/msgid/hermes-lite/CAABBs1U%2B8Bs9m%2BbUcuTX8nnxTm2yFfSrLRO%2BPoRGyyTHY5-uew%40mail.gmail.com
> <https://groups.google.com/d/msgid/hermes-lite/CAABBs1U%2B8Bs9m%2BbUcuTX8nnxTm2yFfSrLRO%2BPoRGyyTHY5-uew%40mail.gmail.com>
> >Â Â
> Â <https://groups.google.com/d/msgid/hermes-lite/CAABBs1U%2B8Bs9m%2BbUcuTX8nnxTm2yFfSrLRO%2BPoRGyyTHY5-uew%40mail.gmail.com
> <https://groups.google.com/d/msgid/hermes-lite/CAABBs1U%2B8Bs9m%2BbUcuTX8nnxTm2yFfSrLRO%2BPoRGyyTHY5-uew%40mail.gmail.com>>
> >
> >Â Â Â >
> >Â Â
> Â <https://groups.google.com/d/msgid/hermes-lite/CAABBs1U%2B8Bs9m%2BbUcuTX8nnxTm2yFfSrLRO%2BPoRGyyTHY5-uew%40mail.gmail.com?utm_medium=email&utm_source=footer
> <https://groups.google.com/d/msgid/hermes-lite/CAABBs1U%2B8Bs9m%2BbUcuTX8nnxTm2yFfSrLRO%2BPoRGyyTHY5-uew%40mail.gmail.com?utm_medium=email&utm_source=footer>
> >Â Â
> Â <https://groups.google.com/d/msgid/hermes-lite/CAABBs1U%2B8Bs9m%2BbUcuTX8nnxTm2yFfSrLRO%2BPoRGyyTHY5-uew%40mail.gmail.com?utm_medium=email&utm_source=footer
> <https://groups.google.com/d/msgid/hermes-lite/CAABBs1U%2B8Bs9m%2BbUcuTX8nnxTm2yFfSrLRO%2BPoRGyyTHY5-uew%40mail.gmail.com?utm_medium=email&utm_source=footer>>>.
> >
> >
> >Â Â Â --
> >Â Â Â Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
> >Â Â Â Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers
> Tech Support
> >Â Â Â Senior Staff Specialist, Cricket Coach
> >Â Â Â Microsoft Windows Free Zone - Linux used for all
> Computing Tasks
> >
> >Â Â Â --
> >Â Â Â You received this message because you are subscribed to
> the Google
> >Â Â Â Groups "Hermes-Lite" group.
> >Â Â Â To unsubscribe from this group and stop receiving emails
> from it,
> >Â Â Â send an email to hermes-lite...@googlegroups.com
> <mailto:hermes-lite%2Bunsu...@googlegroups.com>
> >Â Â Â <mailto:hermes-lite%2Bunsu...@googlegroups.com
> <mailto:hermes-lite%252Buns...@googlegroups.com>>.
> >Â Â Â To view this discussion on the web visit
> >Â Â Â
> https://groups.google.com/d/msgid/hermes-lite/bc645b25-31fc-b977-bcbd-bf95b5dc3bae%40gmail.com
> <https://groups.google.com/d/msgid/hermes-lite/bc645b25-31fc-b977-bcbd-bf95b5dc3bae%40gmail.com>
> >Â Â
> Â <https://groups.google.com/d/msgid/hermes-lite/bc645b25-31fc-b977-bcbd-bf95b5dc3bae%40gmail.com
> <https://groups.google.com/d/msgid/hermes-lite/CAABBs1VmUQ4QcTHO2jL2HqQcGtaXrpD_%2BVOJC9pN4V1u9mLaeg%40mail.gmail.com>
>
> >
> <https://groups.google.com/d/msgid/hermes-lite/CAABBs1VmUQ4QcTHO2jL2HqQcGtaXrpD_%2BVOJC9pN4V1u9mLaeg%40mail.gmail.com?utm_medium=email&utm_source=footer
> https://groups.google.com/d/msgid/hermes-lite/039bd9de-5de5-e21a-a2bd-2174262de575%40gmail.com
> <https://groups.google.com/d/msgid/hermes-lite/039bd9de-5de5-e21a-a2bd-2174262de575%40gmail.com>.
> <https://groups.google.com/d/msgid/hermes-lite/CAABBs1Un8BGgLrq5ioSf9befm8t%3DCBaiDvJLK64m_HZSKMXipA%40mail.gmail.com?utm_medium=email&utm_source=footer>.
I had some problems with the PCB's I got from JLCPCB, tracks missing.
IC1 pins 15, 16 and 17 on one PCB were not connected so I had to bridge
them and wire to GND.
On another the GND was missing on the BAND- switch.
One board would not power up, looked like misrouted traces.
Others ordering later reported their PCB's were fine.
73 ... Sid.
On 29/10/2020 16:13, Jonas Sanamon wrote:
> Thanks Sid,
>
> As I suspected then there is something strange with my power button as
> I cannot power off regardless of how long I hold the controller's
> power button, the LED stays on. The only way for me to turn off is to
> remove power.
> I need to look into the schematic to understand the mono-stable T1/T2
> As I suspected then there is something strange with my power button as
> I cannot power off regardless of how long I hold the controller's
> power button, the LED stays on. The only way for me to turn off is to
> remove power.
> configuration in order to understand what the problem is IÂ guess...
> <mailto:boyc...@gmail.com>>:
>
> Hi Jonas,
> On the PiHPSDR v2 .... Menu --> Exit piHPSDR --> Shutdown
> pihpsdr closes but there is still the power LED on and Ethernet port
> active, also another LEDÂ on the Pi4.
> Hi Jonas,
> On the PiHPSDR v2 .... Menu --> Exit piHPSDR --> Shutdown
> pihpsdr closes but there is still the power LED on and Ethernet port
>
> Â From there you can't power on.
>
> Pressing and holding in the Power switch causes everything to
> power down.
> After that the Power switch restores power and the Pi4 boots up.
> 73 ... Sid.
>
>
> On 29/10/2020 07:22, Jonas Sanamon wrote:
> > Hi Sid,
> >
> > Thanks. So if I understand You correctly, after You have shut
> down the
> > Rpi using menu->shutdown you can power it off using the power
> button
> > on the controller?Â
> Pressing and holding in the Power switch causes everything to
> power down.
> After that the Power switch restores power and the Pi4 boots up.
> 73 ... Sid.
>
>
> On 29/10/2020 07:22, Jonas Sanamon wrote:
> > Hi Sid,
> >
> > Thanks. So if I understand You correctly, after You have shut
> down the
> > Rpi using menu->shutdown you can power it off using the power
> button
> >
> > For some reason, I can only power up using the button, but pressing
> > the button while power is on has no effect.
> > I'm trying to understand if this is as designed or if there is
> > something off with my build.
> >
> > Regards, Jonas
> >
> >
> > Den ons 28 okt. 2020 kl 22:34 skrev Sid Boyce
> <boyc...@gmail.com <mailto:boyc...@gmail.com>
> > <mailto:boyc...@gmail.com <mailto:boyc...@gmail.com>>>:
> > For some reason, I can only power up using the button, but pressing
> > the button while power is on has no effect.
> > I'm trying to understand if this is as designed or if there is
> > something off with my build.
> >
> > Regards, Jonas
> >
> >
> > Den ons 28 okt. 2020 kl 22:34 skrev Sid Boyce
> <boyc...@gmail.com <mailto:boyc...@gmail.com>
> >
> >Â Â Â Hi Jonas,
> >Â Â Â I use the menu to shutdown but the PiHPSDR v2 still has
> power until I
> >Â Â Â press the power off button.
> >Â Â Â To power on again I have to first power down and up again
> using
> >Â Â Â the button.
> >
> >Â Â Â May be that's the way as it's the same on both of my units.
> >Â Â Â 73 ... Sid.
> >
> >Â Â Â On 28/10/2020 17:12, Jonas Sanamon wrote:
> >Â Â Â > Hi all,
> >Â Â Â >
> >   > I've built a mk2 controller, and I can power on the
> >Â Â Â controller+RPi4
> >Â Â Â > using the power button on the controller, but I cannot
> power down
> >Â Â Â > using the same.
> >   > Looking at the schematic I cannot see how the
> power button
> >Â Â Â could do
> >Â Â Â > so, am i missing something?
> >Â Â Â >
> >Â Â Â > Regards,
> >Â Â Â > Jonas - SM4VEY
> >Â Â Â > --
> >Â Â Â > You received this message because you are subscribed to
> the Google
> >Â Â Â > Groups "Hermes-Lite" group.
> >Â Â Â > To unsubscribe from this group and stop receiving
> emails from
> >Â Â Â it, send
> >Â Â Â > an email to hermes-lite...@googlegroups.com
> <mailto:hermes-lite%2Bunsu...@googlegroups.com>
> >Â Â Â <mailto:hermes-lite%2Bunsu...@googlegroups.com
> <mailto:hermes-lite%252Buns...@googlegroups.com>>
> >Â Â Â > <mailto:hermes-lite...@googlegroups.com
> <mailto:hermes-lite%2Bunsu...@googlegroups.com>
> >Â Â Â <mailto:hermes-lite%2Bunsu...@googlegroups.com
> <mailto:hermes-lite%252Buns...@googlegroups.com>>>.
> >Â Â Â > To view this discussion on the web visit
> >Â Â Â >
> >Â Â Â
> https://groups.google.com/d/msgid/hermes-lite/CAABBs1U%2B8Bs9m%2BbUcuTX8nnxTm2yFfSrLRO%2BPoRGyyTHY5-uew%40mail.gmail.com
> <https://groups.google.com/d/msgid/hermes-lite/CAABBs1U%2B8Bs9m%2BbUcuTX8nnxTm2yFfSrLRO%2BPoRGyyTHY5-uew%40mail.gmail.com>
> >Â Â
> Â <https://groups.google.com/d/msgid/hermes-lite/CAABBs1U%2B8Bs9m%2BbUcuTX8nnxTm2yFfSrLRO%2BPoRGyyTHY5-uew%40mail.gmail.com
> <https://groups.google.com/d/msgid/hermes-lite/CAABBs1U%2B8Bs9m%2BbUcuTX8nnxTm2yFfSrLRO%2BPoRGyyTHY5-uew%40mail.gmail.com>>
> >
> >Â Â Â >
> >Â Â
> Â <https://groups.google.com/d/msgid/hermes-lite/CAABBs1U%2B8Bs9m%2BbUcuTX8nnxTm2yFfSrLRO%2BPoRGyyTHY5-uew%40mail.gmail.com?utm_medium=email&utm_source=footer
> <https://groups.google.com/d/msgid/hermes-lite/CAABBs1U%2B8Bs9m%2BbUcuTX8nnxTm2yFfSrLRO%2BPoRGyyTHY5-uew%40mail.gmail.com?utm_medium=email&utm_source=footer>
> >Â Â
> Â <https://groups.google.com/d/msgid/hermes-lite/CAABBs1U%2B8Bs9m%2BbUcuTX8nnxTm2yFfSrLRO%2BPoRGyyTHY5-uew%40mail.gmail.com?utm_medium=email&utm_source=footer
> <https://groups.google.com/d/msgid/hermes-lite/CAABBs1U%2B8Bs9m%2BbUcuTX8nnxTm2yFfSrLRO%2BPoRGyyTHY5-uew%40mail.gmail.com?utm_medium=email&utm_source=footer>>>.
> >
> >
> >Â Â Â --
> >Â Â Â Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
> >Â Â Â Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers
> Tech Support
> >Â Â Â Senior Staff Specialist, Cricket Coach
> >Â Â Â Microsoft Windows Free Zone - Linux used for all
> Computing Tasks
> >
> >Â Â Â --
> >Â Â Â You received this message because you are subscribed to
> the Google
> >Â Â Â Groups "Hermes-Lite" group.
> >Â Â Â To unsubscribe from this group and stop receiving emails
> from it,
> >Â Â Â send an email to hermes-lite...@googlegroups.com
> <mailto:hermes-lite%2Bunsu...@googlegroups.com>
> >Â Â Â <mailto:hermes-lite%2Bunsu...@googlegroups.com
> <mailto:hermes-lite%252Buns...@googlegroups.com>>.
> >Â Â Â To view this discussion on the web visit
> >Â Â Â
> https://groups.google.com/d/msgid/hermes-lite/bc645b25-31fc-b977-bcbd-bf95b5dc3bae%40gmail.com
> <https://groups.google.com/d/msgid/hermes-lite/bc645b25-31fc-b977-bcbd-bf95b5dc3bae%40gmail.com>
> >Â Â
> Â <https://groups.google.com/d/msgid/hermes-lite/bc645b25-31fc-b977-bcbd-bf95b5dc3bae%40gmail.com
> <https://groups.google.com/d/msgid/hermes-lite/bc645b25-31fc-b977-bcbd-bf95b5dc3bae%40gmail.com>>.
> >
> > --
> > You received this message because you are subscribed to the Google
> > Groups "Hermes-Lite" group.
> > To unsubscribe from this group and stop receiving emails from
> it, send
> > an email to hermes-lite...@googlegroups.com
> >
> > --
> > You received this message because you are subscribed to the Google
> > Groups "Hermes-Lite" group.
> > To unsubscribe from this group and stop receiving emails from
> it, send
> > an email to hermes-lite...@googlegroups.com
> <mailto:hermes-lite%2Bunsu...@googlegroups.com>
> > <mailto:hermes-lite...@googlegroups.com
> <mailto:hermes-lite%2Bunsu...@googlegroups.com>>.
> > To view this discussion on the web visit
> >
> https://groups.google.com/d/msgid/hermes-lite/CAABBs1VmUQ4QcTHO2jL2HqQcGtaXrpD_%2BVOJC9pN4V1u9mLaeg%40mail.gmail.com
> > <mailto:hermes-lite...@googlegroups.com
> <mailto:hermes-lite%2Bunsu...@googlegroups.com>>.
> > To view this discussion on the web visit
> >
> <https://groups.google.com/d/msgid/hermes-lite/CAABBs1VmUQ4QcTHO2jL2HqQcGtaXrpD_%2BVOJC9pN4V1u9mLaeg%40mail.gmail.com>
>
> >
> <https://groups.google.com/d/msgid/hermes-lite/CAABBs1VmUQ4QcTHO2jL2HqQcGtaXrpD_%2BVOJC9pN4V1u9mLaeg%40mail.gmail.com?utm_medium=email&utm_source=footer
> <https://groups.google.com/d/msgid/hermes-lite/CAABBs1VmUQ4QcTHO2jL2HqQcGtaXrpD_%2BVOJC9pN4V1u9mLaeg%40mail.gmail.com?utm_medium=email&utm_source=footer>>.
>
>
> --
> Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
> Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
> Senior Staff Specialist, Cricket Coach
> Microsoft Windows Free Zone - Linux used for all Computing Tasks
>
> --
> You received this message because you are subscribed to the Google
> Groups "Hermes-Lite" group.
> To unsubscribe from this group and stop receiving emails from it,
> send an email to hermes-lite...@googlegroups.com
>
>
> --
> Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
> Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
> Senior Staff Specialist, Cricket Coach
> Microsoft Windows Free Zone - Linux used for all Computing Tasks
>
> --
> You received this message because you are subscribed to the Google
> Groups "Hermes-Lite" group.
> To unsubscribe from this group and stop receiving emails from it,
> https://groups.google.com/d/msgid/hermes-lite/039bd9de-5de5-e21a-a2bd-2174262de575%40gmail.com
> <https://groups.google.com/d/msgid/hermes-lite/039bd9de-5de5-e21a-a2bd-2174262de575%40gmail.com>.
>
> --
> You received this message because you are subscribed to the Google
> Groups "Hermes-Lite" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to hermes-lite...@googlegroups.com
> <mailto:hermes-lite...@googlegroups.com>.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/hermes-lite/CAABBs1Un8BGgLrq5ioSf9befm8t%3DCBaiDvJLK64m_HZSKMXipA%40mail.gmail.com
> --
> You received this message because you are subscribed to the Google
> Groups "Hermes-Lite" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to hermes-lite...@googlegroups.com
> <mailto:hermes-lite...@googlegroups.com>.
> To view this discussion on the web visit
> <https://groups.google.com/d/msgid/hermes-lite/CAABBs1Un8BGgLrq5ioSf9befm8t%3DCBaiDvJLK64m_HZSKMXipA%40mail.gmail.com?utm_medium=email&utm_source=footer>.
Reply all
Reply to author
Forward
0 new messages