Hermes-lite

[tonypickett369]

Can someone tell me if there is such a thing as an idiots guide to the Hermes-lite. I am new to this radio and there is so much written about it, and all I would like to do is start it up and make sure it's working correctly. 

Tony M0TDP 

Sent from my Galaxy

[Sid Boyce]

This is quite a detailed video of the hardware.
https://www.youtube.com/watch?v=RCa-wd3Xb_k
73 ... Sid.

> --
> You received this message because you are subscribed to the Google
> Groups "Hermes-Lite" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to hermes-lite...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/hermes-lite/64ad48a4.050a0220.e12df.8a77SMTPIN_ADDED_BROKEN%40gmr-mx.google.com
> <https://groups.google.com/d/msgid/hermes-lite/64ad48a4.050a0220.e12df.8a77SMTPIN_ADDED_BROKEN%40gmr-mx.google.com?utm_medium=email&utm_source=footer>.


--
Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
Senior Staff Specialist, Cricket Coach
Microsoft Windows Free Zone - Linux used for all Computing Tasks

[ron.ni...@gmail.com]

Since the HL2 is a networked SDR with no controls on the front panel, basic start-up depends on with which compute device you plan on running the HL2: Window, Linux, PiHPSDR console, Mac, Android, or iOS device; how you plan on connecting the HL2: via WiFi, wired router, or just a cable; as well as which SDR software you plan to try running.

73, Ron, n6ywu

[Ron Lewkowicz]

You want to look at some of these videos probably...

https://www.youtube.com/@hermes-litesoftwaredefined1675

In particular install Quisk and follow the Quisk Setup video then check the PA Bios setup video.  It's highly unlikely you will need to adjust the PA Bios setting but it's worth check to make sure it's in range of where it should be.  Mine was fine as it was.  Test the radio out using Quisk first to make sure everything is working properly. If you switch to other software and run into issues then you know it's not a hardware problem. 

[Antonio Perrone]

Salve a tutti, sono da poco possessore di HL che uso con Molto piacere. uso  anche ELAD duo   Flex 5000   Softrock rx tx  provato anche Red pitaya. ma  vi assicuro; Hermes Lite 2  va BENISSIMO BENISSIMO BENISSIMO STRAORDINARIO SDR con Thetis v. 2.9.8x 64  poi con SDR Consolle. Grazie  a TUTTI

[radi...@mail.com]

Tony

IMHO the very best place to start is to give the Wiki a thorough read through, but perhaps starting with the FAQ, then work way down the Wiki index on right of page. It tells you just about everything you could need to know to get started:

https://github.com/softerhardware/Hermes-Lite2/wiki/FAQ

If you are a Windows user then I can't recommend SDR Console highly enough as the software companion to HL2. It's pretty much install and go. If you need help there is a very supportive IO Group to help you out.

https://www.sdr-radio.com/

https://sdr-radio.groups.io/g/main/topics

Max

[Phil Davis]

Hi all, Re SDR Console, Simon's latest beta release has a new Noise reduction option, NR5, my initial testing shows it to be on par with NR2 in Thetis.

Phil