On Sat, May 19, 2018 at 2:08 PM, Andrea Lawendel <
lawe...@gmail.com> wrote:
> I see, thanks for this Alex! So that I should expect approx 660 kHz of
> bandwidth when connecting to the HF+, right?
You will get the exact same bandwidth as you get from the hardware. It
is 768 kHz, but the edges are not useful due to anti-aliasing filters.
That's the same for all SDRs.
> One other thing, on a slightly different thread. I'm considering buying an
> RSP1A to eventually test it in a remotely controlled setup together with a
> Raspberry. But what about using the SDRplay unit on a Mac (Sierra) with
> Gqrx? I understand it can happen via a SoapySDR interface, but I also heard
> about a few problems under this setup. Should it be viable?
It is supported, but due to the binary only drivers and the way gqrx
uses drivers it is not possible for me to bundle the driver with the
application. So you would have to find another way to get gqrx. For
the same reason, I have never actually tested sdrplay support on Mac,
so it wouldn't be my first choice if all you want is get out and
receive. Perhaps their cubicsdr bundle works better.
Alex