[Hardware] Spindle Controller for Sanguinololu (StepStickSocket)

[Samuel Kranz]

Spindle Controller V1.2

This is a simple spindle controller with a relay (on/off) for Sanguinololu (or every board with a free StepstickSocket).

SPEC:

A simple relay to control the spindle

12V power from Sanguinololu (stepsticksocket)

max. 16A -> ~200W

LED to show if Spindle is enabled.

Project:

Hardware: Github

Software: Github

BOM: GoogleDoc

Pictures:

[Iceflow]

Great adition :D thanks for sharing it with us!!

I see in farnell that the relay has 8 pins but in the board is only 5pads for the relay pins... what you do with the others? cut it out?

Double sided board with SMD components, maybe there is a chance you make one single sided troughole components version? easier to do with a Cyclone :D

Also the power conector seems to be in the down side of the board, is it true? a little strange placement, but it helps minimize the board size...

As a note, you put a SMD mosfet in the BOM, but in the board photo seems to be a troughole... is it right? the pins will match?

2013/8/29 Samuel Kranz <secu...@gmail.com>

--
Has recibido este mensaje porque estás suscrito al grupo "Cyclone PCB Factory" de Grupos de Google.
Para anular la suscripción a este grupo y dejar de recibir sus correos electrónicos, envía un correo electrónico a cyclone-pcb-fac...@googlegroups.com.
Para publicar una entrada en este grupo, envía un correo electrónico a cyclone-p...@googlegroups.com.
Para ver este debate en la Web, visita https://groups.google.com/d/msgid/cyclone-pcb-factory/ba9db33d-628e-4946-88a0-80570b9a602e%40googlegroups.com.
Para obtener más opciones, visita https://groups.google.com/groups/opt_out.

[Samuel Kranz]

Dafuq O.o I just answered.. In this case ill answer again.

Thanks for your feedback (:

To answer your Questions:

The relay I'll use is out of the same series (smaller with 1 phase and 5 pins)  as the relay attached -> I have to update the BOM.

In the next days i will create a single-sided layout with THT components. And I will release a KiCad version of the PCB.

You're right about the "power connector" its downside to minimize the layout.

And the Mosfet is a SMD version in SOT23 package. Maybe you messed up with the snubber-diode next to the relay.  

I have to add this is not the final version and the firmware is not ready at this time. I will update everything the next days :)

. 

[Iceflow]

I wait anxious for your THT release!! :D

2013/8/29 Samuel Kranz <secu...@gmail.com>

--

Has recibido este mensaje porque estás suscrito al grupo "Cyclone PCB Factory" de Grupos de Google.
Para anular la suscripción a este grupo y dejar de recibir sus correos electrónicos, envía un correo electrónico a cyclone-pcb-fac...@googlegroups.com.
Para publicar una entrada en este grupo, envía un correo electrónico a cyclone-p...@googlegroups.com.

Para ver este debate en la Web, visita https://groups.google.com/d/msgid/cyclone-pcb-factory/409949e6-d7f3-4481-906e-7b2780a5c664%40googlegroups.com.

[Samuel Kranz]

Ive uploaded the tht version a couple of days ago. But unfortunately i havnt got the components to test the board.

[Iceflow]

Where can i find it¿? so i maybe try to make one by hand :P

El 5 de septiembre de 2013 18:26, Samuel Kranz <secu...@gmail.com> escribió:

Ive uploaded the tht version a couple of days ago. But unfortunately i havnt got the components to test the board.

--
Has recibido este mensaje porque estás suscrito al grupo "Cyclone PCB Factory" de Grupos de Google.
Para anular la suscripción a este grupo y dejar de recibir sus correos electrónicos, envía un correo electrónico a cyclone-pcb-fac...@googlegroups.com.
Para publicar una entrada en este grupo, envía un correo electrónico a cyclone-p...@googlegroups.com.

Para ver este debate en la Web, visita https://groups.google.com/d/msgid/cyclone-pcb-factory/f82d0fb6-894a-43a8-94c3-1faee5c202d4%40googlegroups.com.

[Samuel Kranz]

https://github.com/secures92/SpindleControlStick

I haven't tested it (haven't got the components yet) but it should work.

[Iceflow]

Thanks :D i will give it a try!!

2013/9/6 Samuel Kranz <secu...@gmail.com>

https://github.com/secures92/SpindleControlStick

I haven't tested it (haven't got the components yet) but it should work.

--
Has recibido este mensaje porque estás suscrito al grupo "Cyclone PCB Factory" de Grupos de Google.
Para anular la suscripción a este grupo y dejar de recibir sus correos electrónicos, envía un correo electrónico a cyclone-pcb-fac...@googlegroups.com.
Para publicar una entrada en este grupo, envía un correo electrónico a cyclone-p...@googlegroups.com.

Para ver este debate en la Web, visita https://groups.google.com/d/msgid/cyclone-pcb-factory/7119035d-47c7-4023-872d-16de5387ac0f%40googlegroups.com.

[Samuel Kranz]

I did the changes to the Marlin Firmware so now it supports the M2/M3 and M5 codes.

btw you can compile/change it with Atmel studio and the visual micro plugin. Arduino IDE should also work.

https://github.com/secures92/Marlin_Visual_Micro

[Iceflow]

Great :D

--

Has recibido este mensaje porque estás suscrito al grupo "Cyclone PCB Factory" de Grupos de Google.
Para anular la suscripción a este grupo y dejar de recibir sus correos electrónicos, envía un correo electrónico a cyclone-pcb-fac...@googlegroups.com.
Para publicar una entrada en este grupo, envía un correo electrónico a cyclone-p...@googlegroups.com.

Para ver este debate en la Web, visita https://groups.google.com/d/msgid/cyclone-pcb-factory/921b8153-bdf3-4115-b9d7-aaf4212fd435%40googlegroups.com.