Unusual Flatfish ends on traces (Problem)

[Benjamin Isaacs]

Hi Everyone 

 I Recently have printed my own Cyclone PCB Factory and assembled it & i was doing some tests the other day and this is what happened:

 Eagle Cad > PCB Gcode > OpenCNCPilot < This is a Auto-leveler software, and i got this dog bone / missed steps on the bottom end of the traces notice the other end its perfectly round?

Cheers Benjamin Isaacs 

[Carlos García]

Hi Benjamin, welcome!

Do you think it might be a mechanical lockup? In that case it may help to loosen the gears a bit & add grease to gears and rods.

It may also be caused by false triggering of the X endstop. But this should yield more erratic paths.
Also, could you share the g-code file? To check for other software related issues.

Thanks,

Carlos

--
You received this message because you are subscribed to the Google Groups "Cyclone PCB Factory" group.
To unsubscribe from this group and stop receiving emails from it, send an email to cyclone-pcb-factory+unsub...@googlegroups.com.
To post to this group, send email to cyclone-pcb-factory@googlegroups.com.
Visit this group at https://groups.google.com/group/cyclone-pcb-factory.
To view this discussion on the web, visit https://groups.google.com/d/msgid/cyclone-pcb-factory/4377a6ab-ce56-4509-b2f1-d372aa94aba9%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[Benjamin Isaacs]

Hey Carlos thank you for replying 

 I found out what the problem was, it was caused by the gears on the Steppers being printed at only 30% i reprinted them at 100% and theres no slipping now the 

the nut had pulled though the plastic and the was loose 

 Cheers Benjamin 

 

[Carlos García]

That's great to hear, thanks for sharing the solution! And happy milling :)

--

You received this message because you are subscribed to the Google Groups "Cyclone PCB Factory" group.

To unsubscribe from this group and stop receiving emails from it, send an email to cyclone-pcb-factory+unsubscribe...@googlegroups.com.

To post to this group, send email to cyclone-pcb-factory@googlegroups.com.
Visit this group at https://groups.google.com/group/cyclone-pcb-factory.

To view this discussion on the web, visit https://groups.google.com/d/msgid/cyclone-pcb-factory/8ce90fe3-590b-4580-9618-ec42a6cf8ebe%40googlegroups.com.