Does ethernet work on x15 console images by default?

[Rick Mann]

I finally got a console image flashed onto my x15, and it seems Ethernet doesn't work. I get no link lights on either port, and eth0 and eth1 are both DOWN. If I issue /sbin/ifconfig eth0 up, I don't get any errors, and the state changes to UP, but I still get no link light nor IP address. /etc/network/interfaces seems to be set up for DHCP:

auto eth0
iface eth0 inet dhcp

I've tried multiple Ethernet cables and ports on the switch.

Any suggestions? Am I just missing something obvious, or is my board hosed?

Thanks,

--
Rick Mann
rm...@latencyzero.com

[Rick Mann]

I just tried the IoT image, and Ethernet comes up just fine. I clearly don't understand the differences in the images.

> --
> For more options, visit http://beagleboard.org/discuss
> ---
> You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard...@googlegroups.com.
> To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/625BFC48-1342-445E-93F4-2398E66BB6F1%40latencyzero.com.
> For more options, visit https://groups.google.com/d/optout.


--
Rick Mann
rm...@latencyzero.com