Huawei BM632 firmware

[nael awad]

I need to Download Huawei BM632 firmware ,the resone that i try to
change the mac address by issue command setallmacaddr
i run the command twice then wan mac now is blank and the wimax is not
working at all when i try to put username and password the device is
unable to save information i try to go to Wimax status internet error
and unable to see any thing
if any one can send me a firmware for BM632 , and can i backup the
current firmware
I run the down command
but still the wan was blank after i restart the device
ATP>setallmacaddr 00:25:9E:DE:CC:78
setallmacaddr 00:25:9E:DE:D2:15
Set WAN mac address success.
LAN Mac address updated: 00:25:9E:DE:CC:78

Set LAN mac address success.
LAN Mac address updated: 00:25:9E:DE:CC:79

Set WiMAX mac address success.
WiMAX Mac address updated:

plz help

[mardak]

The blank WAN problem is due to two reasons:

- invalid MAC address: le last 4 numbers should only be the ones you
change when you are inputing a MAC address since the begining 8 are
for model number and region code. An invalid MAC will render the board
useless unless corrected.

- corrupt nand: there is no easy solution to this problem, you will
need a nand programer or a mint firmware of the original box. When the
WAN is blank it means that the eth0 got disabled, it is in USB mode,
hence if you check the name in the ifconfig shell command will be
named as USB1 or USB0

will post a way on how to revert the USB0/1 back to eth0/1 later on,
maybe on my blogsite so stay tuned

[Spectroplasm]

These words are the exact same as I said a couple of months ago. It's
nice to see other people have found how to revert from USB mode back
to interface mode. I'm running a tight schedule, proof, my blog hasn't
been updated in a long while.

Spec

[Good Muyis]

Hi Spec. if you have found the solution pls send me the procedure

Thanks

[BMT]

http://blogmytuts.blogspot.com/2012/09/wimax-config-patch-protection.html

or type restoredef in telnet then enter

[tanweer talukder]

That's it............

--
You received this message because you are subscribed to the Google Groups "wimax hacking" group.

To view this discussion on the web visit https://groups.google.com/d/msg/wimax-hacking/-/B1Yryx3ngNsJ.

To post to this group, send email to wimax-...@googlegroups.com.
To unsubscribe from this group, send email to wimax-hackin...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/wimax-hacking?hl=en.

[4sight]

Hi guys, on downloading the configuration file it turns to be in .conf extension and was encoded.
Pls how do i decode the file for making proper settings of my choice.

Thnks in advance.