Skip to first unread message
Łukasz Parysz
Jan 4, 2013, 4:24:33 AM1/4/13
to ultra-c...@googlegroups.com
ALH!
I have a (probably) small problem. I used to work with RTL and SDR#/HDSDR on one of the available ports USB. All fine. I want to change the USB port and now I lost the possibility to use SDR#. HDSDR sees the device and works properly. SDR# can not find device (of course both aren't working at the same time).
I uninstalled RTL in Device Manager, plugged into "new" sockt", used "auto install" driver with zadig and also after extraction of drivers files, but it doesn't solve the problem.
Where could I find the solution? SDRSharp.exe.Config?
Thanks!
^
I have a (probably) small problem. I used to work with RTL and SDR#/HDSDR on one of the available ports USB. All fine. I want to change the USB port and now I lost the possibility to use SDR#. HDSDR sees the device and works properly. SDR# can not find device (of course both aren't working at the same time).
I uninstalled RTL in Device Manager, plugged into "new" sockt", used "auto install" driver with zadig and also after extraction of drivers files, but it doesn't solve the problem.
Where could I find the solution? SDRSharp.exe.Config?
Thanks!
^
Lasse radio
Jan 4, 2013, 7:57:23 AM1/4/13
to ultra-c...@googlegroups.com
Are you using borth HDSDR and SDRSharp at the same time or switch between them? I have no problem switching USB port using SDRSharp, so the problem might be HDSDR...
Lasse
Łukasz Parysz
Jan 4, 2013, 8:08:21 AM1/4/13
to ultra-c...@googlegroups.com
As I see, I wrote:
"(of course both aren't working at the same time)".
"(of course both aren't working at the same time)".
^
--To view this discussion on the web visit https://groups.google.com/d/msg/ultra-cheap-sdr/-/D3xl-2xBMQwJ.
You received this message because you are subscribed to the Google Groups "Ultra Cheap SDR" group.
To post to this group, send email to ultra-c...@googlegroups.com.
To unsubscribe from this group, send email to ultra-cheap-s...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/ultra-cheap-sdr?hl=en.
--
Łukasz Parysz, SQ9JTI
http://hamradio.pl/sq9jti/
Niniejsza wiadomość oraz jej załączniki mogą zawierać informacje poufne i/lub chronione prawem. Jeśli nie jesteś zamierzonym adresatem tej wiadomości, prosimy poinformować o tym fakcie nadawcę i usunąć ją wraz z załącznikami. Kopiowanie i/lub przesyłanie dalej informacji zawartych w tej wiadomości przez osoby do tego nieuprawnione jest surowo zabronione.
This message and its attachments may contain confidential and / or protected by law informations. If you are not the named addressee of this message, please inform the sender and delete it together with the attachments. Copying and / or forwarding of the information contained in this email by unauthorized persons is strictly prohibited.
Lasse radio
Jan 4, 2013, 8:59:34 AM1/4/13
to ultra-c...@googlegroups.com
Ok, I just needed to be certain. I'm not sure how to proceed, but you could uninstall both software, reinstall SDRSharp and test that if i works in different USB ports. If it does, you can install HDSDR. If, after that, you cannot switch ports again, then it has to be HDSDR installation that does something that prevents SDRSharp from working with different ports.....
On Friday, January 4, 2013 2:08:21 PM UTC+1, ^cypis^ aka. SQ9JTI wrote:
Someone else that knows more about how these software works could help...
Lasse
On Friday, January 4, 2013 2:08:21 PM UTC+1, ^cypis^ aka. SQ9JTI wrote:
As I see, I wrote:
"(of course both aren't working at the same time)".
^
Łukasz Parysz
Jan 4, 2013, 9:05:36 AM1/4/13
to ultra-c...@googlegroups.com
I have installed SDR# again, without any success. Because of SDR# plugins availabilty, I'd like to use this application, and HDSDR (which works properly on both USB ports), only occasionally. So I'm waiting for other solutions, if possible ;-)
^
^
2013/1/4 Lasse radio <lasse...@gmail.com>
Ok, I just needed to be certain. I'm not sure how to proceed, but you could uninstall both software, reinstall SDRSharp and test that if i works in different USB ports. If it does, you can install HDSDR. If, after that, you cannot switch ports again, then it has to be HDSDR installation that does something that prevents SDRSharp from working with different ports.....
--
You received this message because you are subscribed to the Google Groups "Ultra Cheap SDR" group.
To view this discussion on the web visit https://groups.google.com/d/msg/ultra-cheap-sdr/-/TDRe6NPYSREJ.
To post to this group, send email to ultra-c...@googlegroups.com.
To unsubscribe from this group, send email to ultra-cheap-s...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/ultra-cheap-sdr?hl=en.
--
Łukasz Parysz, SQ9JTI
http://hamradio.pl/sq9jti/
Niniejsza wiadomość oraz jej załączniki mogą zawierać informacje poufne i/lub chronione prawem. Jeśli nie jesteś zamierzonym adresatem tej wiadomości, prosimy poinformować o tym fakcie nadawcę i usunąć ją wraz z załącznikami. Kopiowanie i/lub przesyłanie dalej informacji zawartych w tej wiadomości przez osoby do tego nieuprawnione jest surowo zabronione.
This message and its attachments may contain confidential and / or protected by law informations. If you are not the named addressee of this message, please inform the sender and delete it together with the attachments. Copying and / or forwarding of the information contained in this email by unauthorized persons is strictly prohibited.
Lasse radio
Jan 4, 2013, 9:10:41 AM1/4/13
to ultra-c...@googlegroups.com
I'm not running the latest version (I have 1.0.0.792) which works perfectly in all USB ports. There might be something in the newer versions that causes this... I don't know. I hope it's solved for you.
Lasse
Łukasz Parysz
Jan 4, 2013, 11:23:25 AM1/4/13
to ultra-c...@googlegroups.com
I used to try the newest and some older versions (fe. 1.0.0.100). Reinstalation of HDSDR doesn't solve the issue.
^
^
Reply all
Reply to author
Forward
0 new messages