FS: Spring Cleaning, Small Parts

[Minh]

Hi all, just starting the process of culling the closet, first step small parts, some rivish stuff, some just beater stuff.  drop me a line if you’re interested in anything and we can try and work it out.  I’m in the Washington DC area.

All prices below are paypal, and shipping is included.  if you buy more then one item then i will combine shipping as best as i can, there is a photoset here -> http://flic.kr/s/aHsjynTADG

1 Pair Nashbar Sidepulls, short reach (39mm-49mm), silver colored with minimal miles (less then 300) plenty of life left in the pads.  $25

1 pair Nashbar Canti-brakes, black, very similiar to the Tektro Oryx brake less then 100 miles, these use the link-wire type straddle cable. $20

Nitto S-65 Seatpost, 27.2, marks around the insertion line but otherwise good condition, see picture.  $55

Tektro CR720 - light surface rust on some of the bolts and some scratches on the brakes but work fine, just took this off my quickbeam.  includes the fancy straddle carrier (also with a little bit of rust) pads are dual-compound koolstops with about 50% left.  $15

Tektro Oryx (silver) - light surface rust on some of the bolts and some scratches on the brakes but work fine, just took this off my quickbeam.  uses the z-wire, pads are nearly gone, i would suggest you replace them right away. $10

Shimano LX V-Brake, pads are about 50% and are koolstop black. $15

Minoura Kickstand - the old style that bolts onto the rear of the bike near the dropouts, $20

Axciom Rear Rack - i believe this is the Phoenix DLX model, which includes the ‘bamboo’ top plate.  i had to cut the stays because they were too long, this came off a ~58cm 700cc bike so if you’re in that range you’ll be ok.  if you need p-clamps please let me know and i can include a pair.  just so you know the tubing on this rack is a little thick so some pannier hooks will not hook on, the gap in the top-plate is also narrow, so your pannier hooks will need to be pretty close together.  see the picture from above.  $40

Huret Stem mount friction shifters, NOS with cables and housing, $15

Cork Grips (the old style, smooth ones) $10

Kalloy Uno Seatpost, 27.2 tons of scratches and insertion marks.  $5 (item is free this is to cover shipping)

Zefal frame pump, my bikes are in the 56-58 size range, so i think this is a medium pump, $15

Suntour Lite front derailleur, this is from the RBW batch a long time ago, it’s for oversized seat-tubes, hence the bar tape in the picture, you can use other forms of shimmage (like a rubber tube), i’ve used a shimmed FD on another bike for 10 years no problem.  This one was mounted and used for only a few weeks so very light use.  $12

Shimano Rear Derailleur, like this one here http://velobase.com/ViewComponent.aspx?ID=b16dcdc3-05a0-4e48-a977-eb02cebd41e6
max cog is 28t, good condition.  $20

Sakae Crankset, quite a bit of pitting, i started to do a sand and polish but ran out of bikes to mount this to, rings are in good shape 52/42 teeth. $15.

Wheelset,  Quickbeam Standard Wheelset, Suzue quick-release cartridge bearing hubs.  The rear hub is double sided, threaded for freewheels on both side, quick-release front and back.  Araya Rims.  I bought the quickbeam second hand so not sure about the age of these wheels, it’s an early green quickbeam, they look to be in good shape.   $120 for the set, I’d like to sell this locally as the shipping will be high relative to the value of the wheels, but make me an offer, will split too.

[Minh]

**Updated with items sold, price drops.

Bike Parts for Sale

Hi all, just starting the process of culling the closet, first step small parts, some rivish stuff, some just beater stuff.  drop me a line if you’re interested in anything and we can try and work it out.  I’m in the Washington DC area.

All prices below are paypal, and shipping is included.  if you buy more then one item then i will combine shipping as best as i can, there is a photoset here -> http://flic.kr/s/aHsjynTADG

1 Pair Nashbar Sidepulls, short reach (39mm-49mm), silver colored with minimal miles (less then 300) plenty of life left in the pads.  $20

1 pair Nashbar Canti-brakes, black, very similiar to the Tektro Oryx brake (look at the pictures and you decide) less then 100 miles, these use the link-wire type straddle cable. $16

Nitto S-65 Seatpost, 27.2, marks around the insertion line but otherwise good condition, see picture.  $45

Tektro Oryx (silver) - light surface rust on some of the bolts and some scratches on the brakes but work fine, just took this off my quickbeam.  uses the z-wire, pads are nearly gone, i would suggest you replace them right away. $8

Shimano LX V-Brake, pads are about 50% and are koolstop black. $12

Axciom Rear Rack - i believe this is the Phoenix DLX model, which includes the ‘bamboo’ top plate.  i had to cut the stays because they were too long, this came off a ~58cm 700cc bike so if you’re in that range you’ll be ok.  if you need p-clamps please let me know and i can include a pair.  just so you know the tubing on this rack is a little thick so some pannier hooks will not hook on, the gap in the top-plate is also narrow, so your pannier hooks will need to be pretty close together.  see the picture from above.  $40

Huret Stem mount friction shifters, NOS with cables and housing, $12

Cork Grips (the old style, smooth ones) $10

Kalloy Uno Seatpost, 27.2 tons of scratches and insertion marks.  $5 (item is free this is to cover shipping)

Shimano Rear Derailleur, like this one here http://velobase.com/ViewComponent.aspx?ID=b16dcdc3-05a0-4e48-a977-eb02cebd41e6

max cog is 28t, good condition.  $18

Sakae Crankset, quite a bit of pitting, i started to do a sand and polish but ran out of bikes to mount this to, rings are in good shape 52/42 teeth. $12 (item is free this covers the shipping).

Tektro CR720 - light surface rust on some of the bolts and some scratches on the brakes but work fine, just took this off my quickbeam.  includes the fancy straddle carrier (also with a little bit of rust) pads are dual-compound koolstops with about 50% left.  $15

Zefal frame pump, my bikes are in the 56-58 size range, so i think this is a medium pump, $15

Suntour Lite front derailleur, this is from the RBW batch a long time ago, it’s for oversized seat-tubes, hence the bar tape in the picture, you can use other forms of shimmage (like a rubber tube), i’ve used a shimmed FD on another bike for 10 years no problem.  This one was mounted and used for only a few weeks so very light use.  $12

Minoura Kickstand - the old style that bolts onto the rear of the bike near the dropouts, $20

Wheelset,  Quickbeam Standard Wheelset, Suzue quick-release cartridge bearing hubs.  The rear hub is double sided, threaded for freewheels on both side, quick-release front and back.  Araya Rims.  I bought the quickbeam second hand so not sure about the age of these wheels, it’s an early green quickbeam, they look to be in good shape.   $120 for the set, I’d like to sell this locally as the shipping will be high relative to the value of the wheels, but make me an offer, will split too.

[Peter Pesce]

Still have the cork grips?

(apologies that I can't seem to reply off list from my phone)

Pete in CT

[Minh Giang]

Pete,

dropped them in the mail today, you should get it in a day or two, thanks!

--
You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group.

To view this discussion on the web visit https://groups.google.com/d/msg/rbw-owners-bunch/-/rdPfoyIO174J.

To post to this group, send email to rbw-owne...@googlegroups.com.
To unsubscribe from this group, send email to rbw-owners-bun...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.

--
minh
-----------
http://www.minhgiang.com
searching for my own choreo-animator

[Minh]

Sigh, sorry all about the reply to all got caught again!