running on raspberry pi

[Blaine Booher]

hi guys!

i have my pyglet app almost finished and figured i'd try it out on my raspberry pi since it does hardware video decoding. unfortunately it won't work! I get a problem with 'this x server does not support glx'. Any ideas on how to fix this? it may not be possible, but talk about a huge bummer! 

i get the error talked about in this first post:

http://www.raspberrypi.org/phpBB3/viewtopic.php?f=32&t=8200

is this a hardware issue, platform issue, software? all of the above? can i build a custom x server with glx? just trying to figure out the issue. thanks!

Blaine

[Anonymouse]

It's a hardware problem. The raspberry pi doesn't support OpenGL - only OpenGL ES. You'd need to modify pyglet to support ES, which may or may not be a huge amount of work. I have never used OpenGL ES (or even looked into the pyglet sources for that matter) myself, so I wouldn't know.

Blaine

--
You received this message because you are subscribed to the Google Groups "pyglet-users" group.
To view this discussion on the web visit https://groups.google.com/d/msg/pyglet-users/-/LQGuoRZh0wYJ.
To post to this group, send email to pyglet...@googlegroups.com.
To unsubscribe from this group, send email to pyglet-users...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/pyglet-users?hl=en.

[Adam Bark]

I have a couple of raspberry pis so I'll have a crack at OpenGL ES
sometime over Christmas.

Adam.

[Blaine Booher]

Awesome, thanks guys.

[Rob van der Most]

Hi,

Has anybody made some progress on this topic? I am planning to have a look at this too and it would be a waste not to consider your progress ;-)

Kind regards,

Rob

Awesome, thanks guys.

--

You received this message because you are subscribed to the Google Groups "pyglet-users" group.

To view this discussion on the web visit https://groups.google.com/d/msg/pyglet-users/-/P7FaEEPUPwgJ.

[Adam Bark]

On 05/02/13 10:32, Rob van der Most wrote:
> Hi,
>
> Has anybody made some progress on this topic? I am planning to have a
> look at this too and it would be a waste not to consider your progress ;-)
>
> Kind regards,
> Rob
>

Hi Rob,

My time slipped into the ether of Christmas so I didn't get anything
done I'm afraid. Good luck and keep us updated.

Cheers,
Adam.

[Rob van der Most]

Hi,

I just created a clone of the repo to start my work. It does seem to be more work than just changing a few calls here and there ;-). Once I've made some progress I will post an update to the list.

Rob