13 ues issue resolved in LTE-EPC scenario BUT now stuck on 50 Ues

[aq]

Hi everyone,

Few weeks back I and some other ppl on this forum also face the same problem that LTE scenario in which there is an epc and 1enb with 13 ues is not working, that issue has been resolved BUT now the problem arises that its stuck on 50 ues.

By stuck i mean there is no dlmac stats and ul/dlrlc stats , only ulmac stats are formed.

I would request to look into this matter and if someone is serious n interested i can send him/her my code that is working for 50 ues but not for more than 50.

For my simulation i had to go to at-least 1000 users :(.

Regards,

Asif 

[psd prasad]

is it possible send me the code sir, i just started my simulation sir which also need more than 50 ues and 10enb.

With Thanks & Regards

M. Prasad, 

Research Scholar,

Dept of Computer Science,

PEC.
Ph: +919944014426

      +919488828822

--
You received this message because you are subscribed to the Google Groups "ns-3-users" group.
To view this discussion on the web visit https://groups.google.com/d/msg/ns-3-users/-/XE0xqkVScTsJ.
To post to this group, send email to ns-3-...@googlegroups.com.
To unsubscribe from this group, send email to ns-3-users+...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/ns-3-users?hl=en.

[asif qamar]

Hi Prasad,

Ya sure i am sending you the code but just to tell you, as you mentioned in your scenario you are going to have 10enb and more than 50 ues so this is not a problem according to my knowledge, the issue arises when we are using only one 1enb and more than 50 ues. I am using on-off application for packet transmission and sink for receive. Originally I wanted to broadcast the packet from every ue but it was also not happening so then i decided to shift to unicast the packet i.e, every ue is sending packet to every another ue in the network.

Hopefully after seeing the code, you or anyone else can come up with good modifications and suggestions for our scenario and even if you find any mistake or blunder then plz do share as we all are learning!

Regards,

Asif

--

Regards,

S.M.ASIF Qamar

Cell # +46-764-354147

IEEE Graduate Student Member

Masters Thesis Student 

Department of Electrical and Information Technology, LTH http://www.eit.lth.se

LUND UNIVERSITY, Lund,Sweden http://www.lunduniversity.lu.se

Masters of Sciences in Electrical Engineering with Emphasis on Radio Communications

School of Engineering, BTH http://www.bth.se/ing 

Blekinge Institute of Technology, Karlskrona, Sweden http://www.bth.se/

[psd prasad]

Hi ASIF

its not like that i need 10 enb for each enb i need to connect more than 50 ues as the movement in the environment. i got your code i just check it and tell.

With Thanks & Regards

M. Prasad, 

Research Scholar,

Dept of Computer Science,

PEC.
Ph: +919944014426

      +919488828822