Looking for LED Vendor

[Cory Geesaman]

I'm trying to find a source for a 910nm 200W-400W LED - does anyone know a good source for high-power LEDs?

(sorry for being a bit off-topic)

If anyone is interested in why:

Trying to source a cheap (compared to the $28,000 retail value) fiber laser for DMLS 3D printing, so far I'm at:

$125 Fiber Resonator http://search.newport.com/?q=*&x2=sku&q2=F-YDC-1100-C

$11.22 Fiber Bragg Grating stock http://search.newport.com/?q=*&x2=sku&q2=F-SBG-13%2F15

$100-$400 Bragg Grating UV mask (not done sourcing a vendor yet)

I've found some relatively low power (8W) IR LEDs around $25 each, but the optics seem like they would be a pain with multiple pump diodes - if I can find a 200W-400W 910nm LED under $600 I would be pretty happy in this case.

--

Found some people locally with access to fusion splicers and UV Excimer lasers so that cuts off $6,000+ of equipment costs.

[Adam Levine]

I've got no insight on the sourcing, but sounds like a great project - Good luck!

Adam B. Levine
http://MindToMatter.org

--
You received this message because you are subscribed to the Google Groups "DIYbio" group.
To post to this group, send email to diy...@googlegroups.com.
To unsubscribe from this group, send email to diybio+un...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msg/diybio/-/-pA4xn_LK5cJ.
For more options, visit https://groups.google.com/groups/opt_out.