On Oct 1, 2012 6:03 PM, "Mark A. Yoder" <mark.a...@gmail.com> wrote:
>
> This looks like fun. I'm trying to grow my own mustache, but it's not taking. Here's what I've done
> I've cloned the github [1]
> I've plugged in my 7 inch DVI cape and powered up.
> Plugged in the PS EYE and /dev/video0 appears. dmesg | tail reports
> [ 417.929607] usb 1-1: new high-speed USB device number 2 using musb-hdrc
> [ 418.071850] usb 1-1: New USB device found, idVendor=1415, idProduct=2000
> [ 418.071869] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [ 418.071883] usb 1-1: Product: USB Camera-B4.04.27.1
> [ 418.071894] usb 1-1: Manufacturer: OmniVision Technologies, Inc.
> [ 418.110913] gspca_main: v2.14.0 registered
> [ 418.124377] gspca_main: ov534-2.14.0 probing 1415:2000
> [ 418.287330] usbcore: registered new interface driver ov534
> I run stache with ./stache 0 but capture = cvCaptureFromCAM(numCamera); always returns 0.
Did you try without the 0 argument?
> What am I missing?
>
> --Mark
>
> [1] git://github.com/jadonk/stache.git
>
> On Tuesday, September 18, 2012 4:23:36 PM UTC-4, Jason Kridner wrote:
>>
>> Boris has been spreading mustaches around DESIGN East, sporting a
>> BeagleBone-based BeagleStache[1] collar running OpenCV face detection
>> with an added mustache. The demo is tomorrow, Sept 19th at 3PM in the
>> DESIGN East Theater located on the Expo Floor, during the DESIGN East
>> Gadget Freak DIY Lab[2]. There is a thread on Google+[3].
>>
>> [1] http://beagleboard.org/project/stache (includes a couple of pictures)
>> [2] http://east.ubmdesign.com/expo/design-east-theater
>> [3] https://plus.google.com/u/1/104712705716996155416/posts/HQGjtxoQU27
>
> --
>
>
Are you invoking from an xterm on the LCD?
--