Adhes gerbers change, is on purpose?

[Salvador E. Tropea]

Hi All!

I guess this is intentional, but just in case. Testing 7.99 I found a
change in the gerbers for the Adhesive layer.

If this is on purpose: Why? So I can document it (note: I used the
attributes to detect if the adhesive was there for certain components)

$ diff -u v6.gbr v8.gbr
--- v6.gbr    2023-04-05 13:26:09.145850356 -0300
+++ v8.gbr    2023-04-05 13:26:41.634019762 -0300
@@ -1,12 +1,12 @@
-%TF.GenerationSoftware,KiCad,Pcbnew,6.0.11+dfsg-1~bpo11+1*%
-%TF.CreationDate,2023-04-05T13:25:09-03:00*%
+%TF.GenerationSoftware,KiCad,Pcbnew,7.99.0-unknown-fd07f50c44~170~ubuntu22.10.1*%
+%TF.CreationDate,2023-04-05T16:18:25+00:00*%
 %TF.ProjectId,kibom-variant_3,6b69626f-6d2d-4766-9172-69616e745f33,rev?*%
 %TF.SameCoordinates,Original*%
 %TF.FileFunction,Glue,Top*%
 %TF.FilePolarity,Positive*%
 %FSLAX46Y46*%
 G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW 6.0.11+dfsg-1~bpo11+1) date 2023-04-05
13:25:09*
+G04 Created by KiCad (PCBNEW
7.99.0-unknown-fd07f50c44~170~ubuntu22.10.1) date 2023-04-05 16:18:25*
 %MOMM*%
 %LPD*%
 G01*
@@ -14,23 +14,19 @@
 %ADD10C,0.100000*%
 G04 APERTURE END LIST*
 D10*
-%TO.C,R2*%
 X141970000Y-90580000D02*
 G75*
 G03*
 X141970000Y-90580000I-400000J0D01*
 G01*
-%TO.C,R1*%
 X141970000Y-87630000D02*
 G75*
 G03*
 X141970000Y-87630000I-400000J0D01*
 G01*
-%TO.C,R3*%
 X148955000Y-89154000D02*
 G75*
 G03*
 X148955000Y-89154000I-400000J0D01*
 G01*
-%TD*%
 M02*

[Seth Hillbrand]

Are you plotting X2 in 7.99?

Seth

Seth Hillbrand

Lead Developer

+1-530-302-5483‬

Long Beach, CA

www.kipro-pcb.com    in...@kipro-pcb.com

--
You received this message because you are subscribed to the Google Groups "KiCad Developers" group.
To unsubscribe from this group and stop receiving emails from it, send an email to devlist+u...@kicad.org.
To view this discussion on the web visit https://groups.google.com/a/kicad.org/d/msgid/devlist/a76306d0-7731-4246-0a5e-5fe132f62cb2%40inti.gob.ar.

[Salvador Eduardo Tropea]

Yes:

        po.SetUseGerberX2format(True)

        po.SetIncludeGerberNetlistInfo(True)

The settings for 6 and 7.99 are identical

---

De: dev...@kicad.org <dev...@kicad.org> en nombre de Seth Hillbrand <se...@kipro-pcb.com>
Enviado: miércoles, 5 de abril de 2023 17:04
Para: dev...@kicad.org <dev...@kicad.org>
Asunto: Re: [kicad] Adhes gerbers change, is on purpose?

 

To view this discussion on the web visit https://groups.google.com/a/kicad.org/d/msgid/devlist/CAFdeG-rqo%3D-EMjZDqgz7xLtvt%3DFqoOyDe0rS%2BjCHK_5C6a0Z6Q%40mail.gmail.com.

[Seth Hillbrand]

You'll need to file a bug report with the project you are working on.  Test projects here output the attributes correctly in 7.99

Seth Hillbrand

Lead Developer

+1-530-302-5483‬

Long Beach, CA

www.kipro-pcb.com    in...@kipro-pcb.com

To view this discussion on the web visit https://groups.google.com/a/kicad.org/d/msgid/devlist/CPWP152MB44428C7533F705A0FA6A5512F7919%40CPWP152MB4442.LAMP152.PROD.OUTLOOK.COM.

[Salvador Eduardo Tropea]

Ok, I just wanted to know if this was on purpose.

Note that this is for the Adhesive layer, I get the attributes in the Paste layer.

---

De: dev...@kicad.org <dev...@kicad.org> en nombre de Seth Hillbrand <se...@kipro-pcb.com>

Enviado: jueves, 6 de abril de 2023 14:38

To view this discussion on the web visit https://groups.google.com/a/kicad.org/d/msgid/devlist/CAFdeG-pRtXcUsuQkLREhfJXyy5MT%3DPZ75C3eHp1BmvDQgmeaTg%40mail.gmail.com.

[Salvador Eduardo Tropea]

I tried 7.99.0-unknown-ca0e57f036~170~ubuntu22.10.1 today and the problem is fixed.

---

De: dev...@kicad.org <dev...@kicad.org> en nombre de Salvador Eduardo Tropea <str...@inti.gob.ar>
Enviado: jueves, 6 de abril de 2023 14:40
Para: dev...@kicad.org <dev...@kicad.org>
Asunto: RE: [kicad] Adhes gerbers change, is on purpose?

 

To view this discussion on the web visit https://groups.google.com/a/kicad.org/d/msgid/devlist/CPWP152MB4442891170A6F5670897E460F7919%40CPWP152MB4442.LAMP152.PROD.OUTLOOK.COM.