through hole on PCB being represented on the schematic
ssylee
(which also compiles to a single through-hole pinout) on the schematic
editor in Altium Designer 6? Thanks.
Peter Bennett
wrote:
>Does anyone know how to insert a symbol that connects to an i/o pinout
>(which also compiles to a single through-hole pinout) on the schematic
>editor in Altium Designer 6? Thanks.
Do you mean you want a 1 pin component on schematic to represent a pad
with plated hole on the board?
I made a schematic part with a single pin - possibly I just placed a
pin-with-circle in the sch library editor. In the PCB library, I mad
a component consisting of a single pad, and used that as the footprint
for the one-pin schematic part.
--
Peter Bennett, VE7CEI
peterbb4 (at) interchange.ubc.ca
new newsgroup users info : http://vancouver-webpages.com/nnq
GPS and NMEA info: http://vancouver-webpages.com/peter
Vancouver Power Squadron: http://vancouver.powersquadron.ca
TT_Man
"ssylee" <stani...@gmail.com> wrote in message
news:1192641760.5...@e9g2000prf.googlegroups.com...
> Does anyone know how to insert a symbol that connects to an i/o pinout
> (which also compiles to a single through-hole pinout) on the schematic
> editor in Altium Designer 6? Thanks.
>
Marra
Surely it is irrelevant at schematic stage ?
Its only when you get to the PCB stage that its important.
The component yo uare using should have multi layer pads.
www.ckp-railways.talktalk.net/pcbcad28.htm
Joel Koltner
news:1193091203.5...@i13g2000prf.googlegroups.com...
> www.ckp-railways.talktalk.net/pcbcad28.htm
Those are quite the monster resistor symbols you have there!
JeffM
Marra wrote:
>>pcbcad28.htm
>>
Joel Koltner wrote:
>Those are quite the monster resistor symbols you have there!
For those with a curiosity about this vendor "Marra"
(aka Wrighty aka Nigel Wright aka nigelwright7557 aka ianbowskill2),
lately, his spamming has become a more cunning stunt
but, in fact, he only shows up to spam and he is still astroturfing
http://www.google.com/search?q=define:astroturfing
...and his ethics were clearly displayed long ago.
**KNOW YOUR VENDOR**
http://groups.google.com/group/sci.electronics.design/browse_frm/thread/07faedb5000ef8c1/70f06e9f2863598f?q=*-pictures.of-his-ass+Yahoogroup+zz+nigelwright7557+ianbowskill2+*-did-the-same-*-*-*-*-*-*-*-*-*-*+*-*-guess-how-he'd-respond-to-a-bug-report-or-request-for-assistance-*-*-*+*-*-*-*-unaffilliated-*-*+spammed
Brad Velander
I almost commented, "It takes a computer to create such god awful ugly
schematics?" I thought I had seen some ugly schematics come out of CAD
systems (PADs Logic comes to mind right off the top of my head) but I have a
new Hall of Flame entry now.
--
Sincerely,
Brad Velander.
"JeffM" <jef...@email.com> wrote in message
news:1193167310....@e9g2000prf.googlegroups.com...
Marra
wrote:
> "Marra" <cresswellave...@talktalk.net> wrote in message
>
> news:1193091203.5...@i13g2000prf.googlegroups.com...
>
> >www.ckp-railways.talktalk.net/pcbcad28.htm
>
> Those are quite the monster resistor symbols you have there!
I like plenty of room to add resistor value and wattage !
A simple value is meaningless.
www.ckp-railways.talktalk.net/pcbcad28.htm
Marra
> You guys are funny!
> I almost commented, "It takes a computer to create such god awful ugly
> schematics?" I thought I had seen some ugly schematics come out of CAD
> systems (PADs Logic comes to mind right off the top of my head) but I have a
> new Hall of Flame entry now.
>
> --
I like the schematics, very clean and plenty opf room for adding extra
information.
www.ckp-railways.talktalk.net/pcbcad28.htm