Re: [Omnetpp-l] Digest for omnetpp@googlegroups.com - 9 Messages in 4 Topics

[gy w]

2011/12/25, omn...@googlegroups.com <omn...@googlegroups.com>:
> =============================================================================
> Today's Topic Summary
> =============================================================================
>
> Group: omn...@googlegroups.com
> Url: http://groups.google.com/group/omnetpp/topics
>
> - Leach Simulation Problem [5 Updates]
> http://groups.google.com/group/omnetpp/t/fb32bdcb8c894e1e
> - Problems with inetmanet in OMNeTpp 4.2 [2 Updates]
> http://groups.google.com/group/omnetpp/t/c6e89fef0b71dde9
> - delays values [1 Update]
> http://groups.google.com/group/omnetpp/t/bdb5fe31262c6c8a
> - CoreException [1 Update]
> http://groups.google.com/group/omnetpp/t/78ce7ecd14d08d2c
>
>
> =============================================================================
> Topic: Leach Simulation Problem
> Url: http://groups.google.com/group/omnetpp/t/fb32bdcb8c894e1e
> =============================================================================
>
> ---------- 1 of 5 ----------
> From: Vikash <vikashs...@gmail.com>
> Date: Dec 24 06:06AM -0800
> Url: http://groups.google.com/group/omnetpp/msg/c94caf362b7c1443
>
> Dear All,
>
> I want to take help regarding the simulation of the omnet project.
>
> I have modified the LEACH routing protocol that I got from omnet
> website itself, and now when I execute the simulation, I got the
> following error:-
>
> OMNeT++ Discrete Event Simulation (C) 1992-2010 Andras Varga, OpenSim
> Ltd.
> Version: 4.1, build: 100611-4b63c38, edition: Academic Public License
> -- NOT FOR COMMERCIAL USE
> See the license for distribution terms and warranty disclaimer
>
> <!> Error during startup: Unknown configuration key: verbose-
> simlation.
>
> End.
>
> I request you to please suggest me how these errors would be
> corrected. I want to use the modified Leach protocol in my one of the
> module of PHD work.
>
>
> Thank You.
>
> Vikash
>
>
> ---------- 2 of 5 ----------
> From: Vikash <vikashs...@gmail.com>
> Date: Dec 24 06:14AM -0800
> Url: http://groups.google.com/group/omnetpp/msg/9133177f19426f8b
>
> Dear All,
>
> Actually I have copied the leach protocol from the Omnet website. The
> protocol was build on omnet 3.3 version and currently I am using omnet
> 4.1. So, for successful execution of the program, I have migrated both
> automatically and manually and also change the name of the folder as
> leachDistOld.
> Now when I execute the protocol the following error is occurred.
>
> vikash@vikash-desktop:~/omnetpp-4.1/samples/leachDistOld$ ./
> leachDistOld
> OMNeT++ Discrete Event Simulation (C) 1992-2010 Andras Varga, OpenSim
> Ltd.
> Version: 4.1, build: 100611-4b63c38, edition: Academic Public License
> -- NOT FOR COMMERCIAL USE
> See the license for distribution terms and warranty disclaimer
>
> <!> Error during startup: Unknown configuration key: verbose-
> simlation.
>
> End.
>
>
> Please suggest me immediately how to solve this problem! For this
> reason my PHD work is pending.
>
> Vikash
>
>
> ---------- 3 of 5 ----------
> From: Aman Zia <aman...@gmail.com>
> Date: Dec 24 07:47PM +0500
> Url: http://groups.google.com/group/omnetpp/msg/6b2a4a0affe6352f
>
> kindly guide me
> i want to send the my information in sending packet in the net80211 aodv
> example of inetmanet
>
>
> --
>
>
>
> Regards
> Aman Zia
> +92-313-9499966
>
>
> ---------- 4 of 5 ----------
> From: Riham <riham.e...@gmail.com>
> Date: Dec 24 08:36AM -0800
> Url: http://groups.google.com/group/omnetpp/msg/3dc84d6b99a1923
>
> Hi Vikash
>
> Unfortunatly, it is not that simple you have to hardcode the program,
> the old leach code was written with both omnet 3 and mobility
> framework, the new omnet 4.1 doesn't support Mobility
> framework,instead it support mixim framework. I tried the migration
> before but it didn't work. so after searching i think we have one of
> two options:
> 1- write the code from the begining using mixim
> 2-there is a group who modified the mobility framework to work with
> omnet4.1
>
> i was going to explore option 2 and run the program under it but iam
> in the middle of my exams
>
> Also do you know if we should do the clustering in the network layer
> or in the Mac layer? because the old code is not clear in that
>
> Thanks
>
>
>
>
>
>
>
> ---------- 5 of 5 ----------
> From: vikash singh <vikashs...@gmail.com>
> Date: Dec 25 11:43AM +0530
> Url: http://groups.google.com/group/omnetpp/msg/4abc15908cef32aa
>
> Dear Riham,
>
> Yes, the leach code was written with omnet 3 but I have migrated it
> manually and correct the lots of errors because there are lots of
> methods and data members which are not supported by omnet 4.1 like
> parentModule() is changed into getParentModule() and so on..
> Now there is no any errors that I got. My code is compiled successfully but
> when I use to run the simulation with ./leachDistOld then the
> following errors are coming
> OMNeT++ Discrete Event Simulation (C) 1992-2010 Andras Varga, OpenSim Ltd.
> Version: 4.1, build: 100611-4b63c38, edition: Academic Public License --
> NOT FOR COMMERCIAL USE
> See the license for distribution terms and warranty disclaimer
>
> <!> Error during startup: Unknown configuration key: verbose- simlation.
>
> As you told me your exam is going on so you plz study for the exam but can
> I contact those group who modified the mobility framework to work with
> omnet4.1??
>
> Also, Since the omnet basically used in MAC layer so I think the clustering
> should be done in MAC layer itself..
>
> Thank You...
>
>
> --
> Regards,
> Vikash Kumar Singh
> Assistant Professor II , CA
> Sikkim Manipal Institute of Technology
> Majitar, East Sikkim - 737136
> UnivMail ID:vika...@livemail.smu.edu.in
> Contact No:+91-9932954599
>
>
>
> =============================================================================
> Topic: Problems with inetmanet in OMNeTpp 4.2
> Url: http://groups.google.com/group/omnetpp/t/c6e89fef0b71dde9
> =============================================================================
>
> ---------- 1 of 2 ----------
> From: Jose Carlos Quispe Chauca <jcarlos...@gmail.com>
> Date: Dec 24 04:56PM -0800
> Url: http://groups.google.com/group/omnetpp/msg/595d2e40689ba137
>
> Dear Nael,
>
> Tried your way 4 times now and still getting the same error working on
> Omnetpp 4.2 in Win 7 x64
>
> Can you zip your entire omnetpp with the inetmanet 2.0 build and send
> that to me, I'm beggining to work on my thesis for Manetrouting and
> really need the inetmanet up and running. I'll really appreciate your
> help on the matter.
>
> Thanks in advance for all your support,
>
> Cheers
>
> Jose Carlos
>
> ------------------------------------------------- Error
> -------------------------------------------------
> networklayer/rsvp_te/RSVPPacket.h:19:26: fatal error: RSVPPacket_m.h:
> No such file or directory
> compilation terminated.
> make[1]: *** [../out/gcc-debug/src/networklayer/rsvp_te/RSVP.o] Error
> 1
> make[1]: Leaving directory `/c/omnetpp-4.2/projects/inetmanet-2.0/src'
> make: *** [all] Error 2
> ------------------------------------------------- Error
> -------------------------------------------------
>
>
>
> ---------- 2 of 2 ----------
> From: nael zuriek <eng.nae...@gmail.com>
> Date: Dec 25 03:21AM +0200
> Url: http://groups.google.com/group/omnetpp/msg/545dc4c29e4452e9
>
> it's more than 1 GB !!!!!!!!
>
> listen , do as follows :
>
> 1 : extract the zipped omnetpp file (which you downloaded from
> omnetpp.org) directly into your C drive and build the simulator as
> usual .
>
> 2 : bring inetmanet-2.0 as naveen and i said before and build it , the
> RSVPPacket.msg problem still exist but you can solve it as follows :
>
> - from mingw32 cd into "git"
> - then cd into "inetmanet-2.0"
> - then cd into "src"
> - then cd into "networklayer"
> - then cd into "rsvp_te"
> - then write this command : opp_msgc RSVPPacket.msg
>
> 3: rebuild the project without cleaning it ....
>
> that's what i did and worked for me >>
>
>
> On Sun, Dec 25, 2011 at 2:56 AM, Jose Carlos Quispe Chauca
>
>
>
> =============================================================================
> Topic: delays values
> Url: http://groups.google.com/group/omnetpp/t/bdb5fe31262c6c8a
> =============================================================================
>
> ---------- 1 of 1 ----------
> From: "eng_ah...@hotmail.com" <eng_ah...@hotmail.com>
> Date: Dec 24 02:17PM -0800
> Url: http://groups.google.com/group/omnetpp/msg/bc249dd07ab27147
>
> i want to save delays values in text file but when i use
> recordScalar("save vals", pktDelay->saveToFile());
> it give me invalid void expression ? so can any one help me
>
>
>
> =============================================================================
> Topic: CoreException
> Url: http://groups.google.com/group/omnetpp/t/78ce7ecd14d08d2c
> =============================================================================
>
> ---------- 1 of 1 ----------
> From: sleeper <wgy...@gmail.com>
> Date: Dec 24 02:33AM -0800
> Url: http://groups.google.com/group/omnetpp/msg/e8608f4f03f06b3d
>
> This problem was solved.
>
> menu: Window-->Preferences,
> General-->Workspace,
> the right half part，change the "Text file encoding" as "Other: UTF or
> ASCII",
> the it is ok.
>
> because “Omnet does support only ascii and UTF-8. No other char
> encodings are not supported.”
>
> see follows page:
> http://groups.google.com/group/omnetpp/browse_thread/thread/bee304d654abd9d0
>
> sleeper 写道：
>
>
>
>
> --
> Sent from the OMNeT++ mailing list. To configure your membership,
> visit http://groups.google.com/group/omnetpp
>