Problems with inetmanet in OMNeTpp 4.2

[Konstantin]

Hey,

i want to use the current version of inetmanet from https://github.com/inetmanet/inetmanet
with the new OMNet++ release 4.2. When building inetmanet it crashes
at about 50% progress with the folling error:

C:\omnetpp-4.2\msys\bin\make.exe: *** couldn't commit memory for
cygwin heap, Win32 error 0
make: *** [all] Error 1

I'm using Win7 64bit.

Can anybody tell me whats wrong?

Another question: What's the difference between inetmanet from
https://github.com/inetmanet/inetmanet and https://github.com/aarizaq/inetmanet-2.0
?

Many thanks,
Konstantin

[naveen chauhan]

Hello friend,

I am using the same version with same configured system, but there are  not too much errors.  only a single error still exist there.

Best regards

Naveen  

Konstantin

--
Sent from the OMNeT++ mailing list. To configure your membership,
visit http://groups.google.com/group/omnetpp

[Alfonso Ariza Quintana]

continue building the framework,

this is a problem with cigwin

[naveen chauhan]

 I generated a new inetmanet project and copy all other files from original place to here. All the errors have been removed but at the time of network generation i got this

 "Error in module (cCompoundModule) HandoverNetworkCluster (id=1) during network setup: Class "ChannelControl" not found -- perhaps its code was not linked in, or the class wasn't registered with Register_Class(), or in the case of modules and channels, with Define_Module()/Define_Channel()"

Kindly suggest me. thank you

Naveen Chauhan

[naveen chauhan]

 I generated a new inetmanet project and copy all other files from original place to here. All the errors have been removed but at the time of network generation i got this

 "Error in module (cCompoundModule) HandoverNetworkCluster (id=1) during network setup: Class "ChannelControl" not found -- perhaps its code was not linked in, or the class wasn't registered with Register_Class(), or in the case of modules and channels, with Define_Module()/Define_Channel()"

Kindly suggest me. thank you

Naveen Chauhan

On Mon, Dec 12, 2011 at 12:45 PM, Alfonso Ariza Quintana <aari...@hotmail.com> wrote:

[Alfonso Ariza Quintana]

 

What example are you using?

[naveen chauhan]

  I am working on wimax security, so i need a code that can work on wimax. numbat code is there but lots of error in that code. i decided to switch on inetmanet.

[naveen chauhan]

wireless->wimax Qos and others,

[naveen chauhan]

 Hello Sir,

I loaded the inetmanet module from https://github.com/aarizaq/inetmanet-2.0,  when set up the network or start any module of inetmanet 2.0 , the error code be displayed..  <!> Warning: opp_run: The specified module could not be found

<!> Error during startup: Cannot load library '../../src//libinet.dll': The operation completed successfully.

   Is this code generated or refined by you? Kindly suggest me...

Thank you

Best Regards

Naveen Chauhan

[Alfonso Ariza Quintana]

Have you checked that the compilation has finished successfully?

[naveen chauhan]

there are 3 main errors--

1... Description Resource Path Location Type

fatal error: RSVPPacket_m.h: No such file or directory RSVPPacket.h /inet/src/networklayer/rsvp_te line 19 C/C++ Problem

2... Description Resource Path Location Type

make: *** [all] Error 2 inet C/C++ Problem

3.... Description Resource Path Location Type

make[1]: *** [../out/gcc-debug/src/networklayer/rsvp_te/RSVP.o] Error 1 inet C/C++ Problem

[naveen chauhan]

the error code is--

<!> Warning: opp_run: The specified module could not be found

<!> Error during startup: Cannot load library '../../src//libinet.dll': The operation completed successfully.

Simulation terminated with exit code: 1

Working directory: C:/omnetpp-4.2/git/inetmanet-2.0/examples/dhcp

Command line: c:/omnetpp-4.2/bin/opp_run.exe -r 0 -c General -n ..;../../src -l ../../src/inet omnetpp.ini

[Alfonso Ariza Quintana]

the compilation has failed.

open the file RSVPPacket.msg write and delete a carriage return (change the file date, you can also use the touch command)

Continue building

[naveen chauhan]

  
  RSVPPacket_m.h file is not found...  I attach the image showing the errors.

[Jose Carlos Quispe Chauca]

Got the same error as Naveen, did anyone work around this I'll really
appreciate some help on making inetmanet work with omnetpp 4-.2

On Dec 12, 7:49 pm, naveen chauhan <navi9...@gmail.com> wrote:
>   RSVPPacket_m.h file is not found...  I attach the image showing the
> errors.
>
> On Mon, Dec 12, 2011 at 10:39 PM, Alfonso Ariza Quintana <
>
>
>
>
>
>
>
> aariza...@hotmail.com> wrote:
> >   the compilation has failed.
> > open the file RSVPPacket.msg write and delete a carriage return (change
> > the file date, you can also use the touch command)
> > Continue building
>

> >  *From:* naveen chauhan <navi9...@gmail.com>
> > *Sent:* Monday, December 12, 2011 2:59 PM
> > *To:* omn...@googlegroups.com
> > *Subject:* Re: [Omnetpp-l] Problems with inetmanet in OMNeTpp 4.2

>
> > there are 3 main errors--
> > 1... Description Resource Path Location Type
> > fatal error: RSVPPacket_m.h: No such file or directory RSVPPacket.h
> > /inet/src/networklayer/rsvp_te line 19 C/C++ Problem
>
> > 2... Description Resource Path Location Type
> > make: *** [all] Error 2 inet C/C++ Problem
>
> > 3.... Description Resource Path Location Type
> > make[1]: *** [../out/gcc-debug/src/networklayer/rsvp_te/RSVP.o] Error 1
> > inet C/C++ Problem
>
> > On Mon, Dec 12, 2011 at 7:18 PM, Alfonso Ariza Quintana <
> > aariza...@hotmail.com> wrote:
>
> >>   Have you checked that the compilation has finished successfully?
>

> >>  *From:* naveen chauhan <navi9...@gmail.com>
> >> *Sent:* Monday, December 12, 2011 1:31 PM
> >>  *To:* omn...@googlegroups.com
> >> *Subject:* Re: [Omnetpp-l] Problems with inetmanet in OMNeTpp 4.2

>
> >>  wireless->wimax Qos and others,
>

> >> On Mon, Dec 12, 2011 at 5:57 PM, naveen chauhan <navi9...@gmail.com>wrote:
>
> >>>   I am working on wimax security, so i need a code that can work on
> >>> wimax. numbat code is there but lots of error in that code. i decided to
> >>> switch on inetmanet.
>
> >>> On Mon, Dec 12, 2011 at 5:44 PM, Alfonso Ariza Quintana <
> >>> aariza...@hotmail.com> wrote:
>
> >>>>  What example are you using?
>

> >>>>  *From:* naveen chauhan <navi9...@gmail.com>
> >>>> *Sent:* Monday, December 12, 2011 1:07 PM
> >>>>  *To:* omn...@googlegroups.com
> >>>> *Subject:* Re: [Omnetpp-l] Problems with inetmanet in OMNeTpp 4.2

>
> >>>>  I generated a new inetmanet project and copy all other files from
> >>>> original place to here. All the errors have been removed but at the time of
> >>>> network generation i got this
>

> >>>> "*Error in module (cCompoundModule) HandoverNetworkCluster (id=1)

> >>>> during network setup: Class "ChannelControl" not found -- perhaps its code
> >>>> was not linked in, or the class wasn't registered with Register_Class(), or
> >>>> in the case of modules and channels, with Define_Module()/Define_Channel()

> >>>> *"

>
> >>>> Kindly suggest me. thank you
>
> >>>> Naveen Chauhan
>
> >>>> On Mon, Dec 12, 2011 at 12:45 PM, Alfonso Ariza Quintana <
> >>>> aariza...@hotmail.com> wrote:
>
> >>>>>   continue building the framework,
> >>>>> this is a problem with cigwin
>

> >>>>>  *From:* naveen chauhan <navi9...@gmail.com>
> >>>>> *Sent:* Sunday, December 11, 2011 5:37 PM
> >>>>> *To:* omn...@googlegroups.com
> >>>>> *Subject:* Re: [Omnetpp-l] Problems with inetmanet in OMNeTpp 4.2

> >>>>>> visithttp://groups.google.com/group/omnetpp

>
> >>>>> --
> >>>>> Sent from the OMNeT++ mailing list. To configure your membership,

> >>>>> visithttp://groups.google.com/group/omnetpp

> >>>>>  --
> >>>>> Sent from the OMNeT++ mailing list. To configure your membership,

> >>>>> visithttp://groups.google.com/group/omnetpp

>
> >>>> --
> >>>> Sent from the OMNeT++ mailing list. To configure your membership,

> >>>> visithttp://groups.google.com/group/omnetpp

> >>>>  --
> >>>> Sent from the OMNeT++ mailing list. To configure your membership,

> >>>> visithttp://groups.google.com/group/omnetpp

>
> >> --
> >> Sent from the OMNeT++ mailing list. To configure your membership,

> >> visithttp://groups.google.com/group/omnetpp

> >>  --
> >> Sent from the OMNeT++ mailing list. To configure your membership,

> >> visithttp://groups.google.com/group/omnetpp

>
> > --
> > Sent from the OMNeT++ mailing list. To configure your membership,

> > visithttp://groups.google.com/group/omnetpp

>
> > --
> > Sent from the OMNeT++ mailing list. To configure your membership,
> > visithttp://groups.google.com/group/omnetpp
>
>
>

>  error.jpg
> 175KViewDownload

[KC]

Using opp_msg to generate RSVPPacket_m.h...But it is not only one
XXX_m.h!!!

On Dec 19, 2:11 am, Jose Carlos Quispe Chauca

[naveen chauhan]

No need to type any command, just install a fresh copy of inetmanet-2.0 using IDE. build the project. Now you will get some errors. open the RSVPPacket.h file...  write anything there and don't forget to delete them. means simple change the date of file. again build the project. Now surely it will work...

[Fung Kwok Chun]

Have you solve all the errors except this one?

2011/12/19 naveen chauhan <navi...@gmail.com>

[naveen chauhan]

I am working on wimax , so its working well on this code...  

[KC]

Would you mind to zip and upload your inetmanet-2.0 to me for
reference? Because I not solve the problem yet in my current platform
for long time.
---> FileFactory, username: newmanf...@yahoo.com.hk and password
is 1234567890. Thanks....

On Dec 19, 11:21 am, naveen chauhan <navi9...@gmail.com> wrote:
> I am working on wimax , so its working well on this code...
>

> On Mon, Dec 19, 2011 at 8:33 AM, Fung Kwok Chun <newmanfung2...@gmail.com>wrote:
>
>
>
>
>
>
>
> > Have you solve all the errors except this one?
>

> > 2011/12/19 naveen chauhan <navi9...@gmail.com>

>
> >> No need to type any command, just install a fresh copy of inetmanet-2.0
> >> using IDE. build the project. Now you will get some errors. open the
> >> RSVPPacket.h file...  write anything there and don't forget to delete them.
> >> means simple change the date of file. again build the project. Now surely
> >> it will work...
>

[naveen chauhan]

   i send you the url , try with this. if still error exist..

1.  use the current version of omnet++ 4.2

2.  inetmanet-2.0 ----    git://github.com/aarizaq/inetmanet-2.0.git   ----   its a current updated inetmanet code, so always import with the help of IDE.

[KC]

???what error....OK let's see .... I also work on wimax...

On Dec 19, 11:31 am, naveen chauhan <navi9...@gmail.com> wrote:
>    i send you the url , try with this. if still error exist..
>
> 1.  use the current version of omnet++ 4.2
> 2.  inetmanet-2.0 ----    git://github.com/aarizaq/inetmanet-2.0.git   ----
>   its a current updated inetmanet code, so always import with the help of
> IDE.
>
>
>
>
>
>
>
> On Mon, Dec 19, 2011 at 8:56 AM, KC <newmanfung2...@gmail.com> wrote:
> > Would you mind to zip and upload your inetmanet-2.0 to me for
> > reference? Because I not solve the problem yet in my current platform
> > for long time.

> > ---> FileFactory, username: newmanfung2...@yahoo.com.hk and password

[KC]

What is your nationality? I am Hong Kong Chinese.

On Dec 19, 11:31 am, naveen chauhan <navi9...@gmail.com> wrote:
>    i send you the url , try with this. if still error exist..
>
> 1.  use the current version of omnet++ 4.2
> 2.  inetmanet-2.0 ----    git://github.com/aarizaq/inetmanet-2.0.git   ----
>   its a current updated inetmanet code, so always import with the help of
> IDE.
>
>
>
>
>
>
>
> On Mon, Dec 19, 2011 at 8:56 AM, KC <newmanfung2...@gmail.com> wrote:
> > Would you mind to zip and upload your inetmanet-2.0 to me for
> > reference? Because I not solve the problem yet in my current platform
> > for long time.

> > ---> FileFactory, username: newmanfung2...@yahoo.com.hk and password

[naveen chauhan]

I am an Indian....  well we both are working wimax, is it working? or still error exist? 

[Fung Kwok Chun]

Dear Naveen, 

I got the following errors.

I also upload it into the FileFactory, you can get it at any time.

Thanks,

KC

**** Build of configuration gcc-debug for project inetmanet-2.0 ****

make MODE=debug CONFIGNAME=gcc-debug all 

cd src && make

make[1]: Entering directory `/c/omnetpp-4.2/workspace/inetmanet-2.0/src'

g++ -c -g -Wall -I/usr/include -fno-stack-protector -DXMLPARSER=libxml -DWITH_PARSIM -DWITH_NETBUILDER -DWITH_TCP_COMMON -DWITH_TCP_INET -DWITH_IPv4 -DWITH_IPv6 -DWITH_xMIPv6 -DWITH_UDP -DWITH_RTP -DWITH_SCTP -DWITH_ETHERNET -DWITH_PPP -DWITH_EXT_IF -DWITH_MPLS -DWITH_OSPFv2 -DWITH_BGPv4 -DWITH_MANET -DWITH_DHCP -I. -Iapplications -Iapplications/dhcp -Iapplications/ethernet -Iapplications/generic -Iapplications/httptools -Iapplications/pingapp -Iapplications/rtpapp -Iapplications/sctpapp -Iapplications/tcpapp -Iapplications/traci -Iapplications/trafgen -Iapplications/udpapp -Iapplications/util -Ibase -Ibattery -Ibattery/models -Ilinklayer -Ilinklayer/channels -Ilinklayer/contract -Ilinklayer/ethernet -Ilinklayer/ethernet/switch -Ilinklayer/ext -Ilinklayer/ieee80211 -Ilinklayer/ieee80211/mac -Ilinklayer/ieee80211/mgmt -Ilinklayer/ieee80211/radio -Ilinklayer/ieee80211/radio/errormodel -Ilinklayer/ieee80211mesh -Ilinklayer/ieee80211mesh/ethernet -Ilinklayer/ieee80211mesh/hwmp -Ilinklayer/ieee80211mesh/mgmt -Ilinklayer/ieee80211mesh/nodes -Ilinklayer/mf80211 -Ilinklayer/mf80211/core -Ilinklayer/mf80211/macLayer -Ilinklayer/mf80211/phyLayer -Ilinklayer/mf80211/phyLayer/decider -Ilinklayer/mf80211/phyLayer/snrEval -Ilinklayer/ppp -Ilinklayer/radio -Ilinklayer/radio/propagation -Imobility -Imobility/models -Inetworklayer -Inetworklayer/arp -Inetworklayer/autorouting -Inetworklayer/autorouting/ipv4 -Inetworklayer/autorouting/ipv6 -Inetworklayer/bgpv4 -Inetworklayer/bgpv4/BGPMessage -Inetworklayer/common -Inetworklayer/contract -Inetworklayer/extras -Inetworklayer/icmpv6 -Inetworklayer/ipv4 -Inetworklayer/ipv4/contract -Inetworklayer/ipv6 -Inetworklayer/ipv6/contract -Inetworklayer/ipv6tunneling -Inetworklayer/ldp -Inetworklayer/manetrouting -Inetworklayer/manetrouting/aodv -Inetworklayer/manetrouting/aodv/aodv-uu -Inetworklayer/manetrouting/base -Inetworklayer/manetrouting/batman -Inetworklayer/manetrouting/dsdv -Inetworklayer/manetrouting/dsr -Inetworklayer/manetrouting/dsr/dsr-uu -Inetworklayer/manetrouting/dymo -Inetworklayer/manetrouting/dymo/dymoum -Inetworklayer/manetrouting/dymo_fau -Inetworklayer/manetrouting/olsr -Inetworklayer/mpls -Inetworklayer/ospfv2 -Inetworklayer/ospfv2/interface -Inetworklayer/ospfv2/messagehandler -Inetworklayer/ospfv2/neighbor -Inetworklayer/ospfv2/router -Inetworklayer/queue -Inetworklayer/rsvp_te -Inetworklayer/ted -Inetworklayer/xmipv6 -Inodes -Inodes/bgp -Inodes/ethernet -Inodes/httptools -Inodes/inet -Inodes/ipv6 -Inodes/mf80211 -Inodes/mpls -Inodes/ospfv2 -Inodes/wireless -Inodes/xmipv6 -Itransport -Itransport/rtp -Itransport/rtp/profiles -Itransport/rtp/profiles/avprofile -Itransport/sctp -Itransport/sctp/contract -Itransport/tcp -Itransport/tcp/flavours -Itransport/tcp/queues -Itransport/tcp_common -Itransport/tcp_common/contract -Itransport/udp -Itransport/udp/contract -IunderTest -IunderTest/applications -IunderTest/applications/TrafficGenerator_Erlangen -IunderTest/hip -IunderTest/hip/application -IunderTest/hip/base -IunderTest/linklayer -IunderTest/linklayer/Ieee80216 -IunderTest/linklayer/Ieee80216/ControlPlane -IunderTest/linklayer/Ieee80216/MACSublayer -IunderTest/linklayer/Ieee80216/MACSublayer/QoS -IunderTest/linklayer/Ieee80216/MACSublayer/Receiver -IunderTest/linklayer/Ieee80216/MACSublayer/Transceiver -IunderTest/linklayer/Ieee80216/Mac -IunderTest/linklayer/Ieee80216/phyLayer -IunderTest/linklayer/Ieee80216/phyLayer/decider -IunderTest/linklayer/Ieee80216/phyLayer/snrEval -IunderTest/linklayer/ieee80211 -IunderTest/linklayer/ieee80211/mgmt -IunderTest/linklayer/radio -IunderTest/nodes -IunderTest/nodes/WiMAX -IunderTest/nodes/hip -IunderTest/nodes/wireless -Iutil -Iutil/headerserializers -Iutil/headerserializers/headers -Iutil/headerserializers/ipv4 -Iutil/headerserializers/ipv4/headers -Iutil/headerserializers/sctp -Iutil/headerserializers/sctp/headers -Iutil/headerserializers/tcp -Iutil/headerserializers/tcp/headers -Iutil/headerserializers/udp -Iutil/headerserializers/udp/headers -Iworld -Iworld/annotations -Iworld/httptools -Iworld/obstacles -Iworld/powercontrol -Iworld/radio -Iworld/scenario -Iworld/traci -Iwpan -Iwpan/Isabel -Iwpan/Isabel/Analysis -Iwpan/Isabel/Base -Iwpan/applications -Iwpan/applications/Ieee802154TestApp -Iwpan/linklayer -Iwpan/linklayer/bmac -Iwpan/linklayer/ieee802154 -Iwpan/linklayer/ieee802154/contract -Iwpan/linklayer/ieee802154/mac -Iwpan/linklayer/ieee802154/phyLayer -Iwpan/networklayer -Iwpan/networklayer/Ieee802154StarRouting -Iwpan/networklayer/contract -Iwpan/nodes -Ic:/omnetpp-4.2/include -o ../out/gcc-debug/src/applications/dhcp/DHCPClient.o applications/dhcp/DHCPClient.cc

In file included from applications/dhcp/DHCPClient.cc:20:0:

applications/dhcp/DHCPClient.h:26:20: fatal error: DHCP_m.h: No such file or directory

make[1]: Leaving directory `/c/omnetpp-4.2/workspace/inetmanet-2.0/src'

compilation terminated.

make[1]: *** [../out/gcc-debug/src/applications/dhcp/DHCPClient.o] Error 1

make: *** [all] Error 2

**** Build Finished ****

2011/12/19 Fung Kwok Chun <newmanf...@gmail.com>

[naveen chauhan]

   Are you working on latest version of omnet++ 4.2? 

[Fung Kwok Chun]

Yes....the latest version 4.2

2011/12/19 naveen chauhan <navi...@gmail.com>

[naveen chauhan]

   1 more thing for you, delete all the contents related to inetmanet, install a fresh copy of omnet++ v 4.2 ( sometimes both versions be overlap). make sure that simple examples of omnet working correctly. now import inetmanet framework using IDE . 

On Tue, Dec 20, 2011 at 7:05 AM, Fung Kwok Chun <newmanf...@gmail.com> wrote:

Yes....the latest version 4.2

2011/12/19 naveen chauhan <navi...@gmail.com>

   Are you working on la test version of omnet++ 4.2? 

[Jose Carlos Quispe Chauca]

Still getting the same error as Naveen RVSPPacket_m.h missing when
building project, did anyone solve this issue? is the file missing
from the Github repo?

I'll really appreciate all the help you can provide me, not working
with WiMax but working with MANET routing and can't execute any
example due to building incomplete

Thank you!

> 2011/12/19 Fung Kwok Chun <newmanfung2...@gmail.com>

>
>
>
>
>
>
>
> > Have you solve all the errors except this one?
>

> > 2011/12/19 naveen chauhan <navi9...@gmail.com>

>
> >> No need to type any command, just install a fresh copy of inetmanet-2.0
> >> using IDE. build the project. Now you will get some errors. open the
> >> RSVPPacket.h file...  write anything there and don't forget to delete them.
> >> means simple change the date of file. again build the project. Now surely
> >> it will work...
>

> ...
>
> read more »
>
>  DHCP.png
> 222KViewDownload

[nael zuriek]

@Jose :

you need to refer to the directory of RSVPPacket.msg using MINGW32 and
write this command :

$ opp_msgc RSVPPacket.msg

it will solve this problem .
after that you have to rebuild the project ...

[HungLT]

Hi, i've just installed inetmanet. I downloaded it by this link https://github.com/downloads/inetmanet/inetmanet/inetmanet-20101013-src.tgz. But now i get the same errors like you :

1. "#include <platdep/sockets.h> must precede <omnetpp.h> (and <platdep/timeutil.h> if present)"
2. make: *** [all] Error 2
3. make[1]: *** [../out/gcc-debug/src/linklayer/ext/cSocketRTScheduler.o] Error 1 

I reinstalled inetmanet following these steps: OMNET++ 4.2 --> File --> Import --> General --> existing projects into Workspace.
Please help me :( Git protocols also gave me errors too :(
Ps: should i try OMNET 4.1 with this version of inetmanet ?

[naveen chauhan]

use inetmanet 2.0 framework, under the current version omnet 4.2 , you have to import inetmanet 2.0 using git...  steps are as follows

 file-> import-> git->projects from git.....

after performing all steps, rebuild the project...  if still errors exist , mail me....

Naveen Chauhan

[HungLT]

Thanks for your help. I did everything as you said, and now i'm facing  some errors with RSVPPacket.msg. Just trying to fix them.

[Rudolf Hornig]

This is a know bug that will be fixed in omnet 4.2.1 until the just touch the RVSPPacket.msg (i.e. edit it and save back to the disc) and build the project again. It will build ok the second time.

Rudolf

[HungLT]

Can you help me to fix these errors ? I reinstalled omnetpp 4.2 and inetmanet using GIT protocol. Firstly I got error " RSVPPacket_m.h file is not found". I tried to fix as you and Naeel done, and now these errors appeared :(

Description    Resource    Path    Location    Type

'nedf_emptyxmldoc' was not declared in this scope    InlineXmlDoc.cc    /inetmanet/src/util    line 22    C/C++ Problem
'Value' in 'class cDynamicExpression' does not name a type    InlineXmlDoc.cc    /inetmanet/src/util    line 24    C/C++ Problem
'Value' in 'class cDynamicExpression' does not name a type    InlineXmlDoc.h    /inetmanet/src/util    line 31    C/C++ Problem
make: *** [all] Error 2    inetmanet             C/C++ Problem
make[1]: *** [../out/gcc-debug/src/util/InlineXmlDoc.o] Error 1    inetmanet             C/C++ Problem

[Jose Carlos Quispe Chauca]

Hello Nael,

Thanks for your answer, I tried the method you mention with no luck,
still facing errors when building project
Is there any update we can get from Andras reggarding this issue to
fix this, I'll really appreciate it

Thanks!!!

On Dec 21, 5:50 pm, nael zuriek <eng.nael.zur...@gmail.com> wrote:
> @Jose :
>
> you need to refer to the directory of RSVPPacket.msg using MINGW32 and
> write this command :
>
> $ opp_msgc RSVPPacket.msg
>
> it will solve this problem .
> after that you have to rebuild the project ...
>
> On Wed, Dec 21, 2011 at 11:21 PM, Jose Carlos Quispe Chauca
>
>
>
>
>
>
>
> <jcarlos.qui...@gmail.com> wrote:
> > Still getting the same error as Naveen RVSPPacket_m.h missing when
> > building project, did anyone solve this issue? is the file missing
> > from the Github repo?
>
> > I'll really appreciate all the help you can provide me, not working
> > with WiMax but working with MANET routing and can't execute any
> > example due to building incomplete
>
> > Thank you!
>
> > On Dec 19, 12:48 am, Fung Kwok Chun <newmanfung2...@gmail.com> wrote:
> >> Dear Naveen,
> >> I got the following errors.
>
> >> I also upload it into the FileFactory, you can get it at any time.
>
> >> Thanks,
> >> KC

> >> **** Build of configuration gcc-debug for projectinetmanet-2.0 ****

> >> >>> > appreciate some help on makinginetmanetwork with omnetpp 4-.2

>
> >> >>> > On Dec 12, 7:49 pm, naveen chauhan <navi9...@gmail.com> wrote:
>
> >> >>> > >   RSVPPacket_m.h file is not found...  I attach the image showing the
> >> >>> > > errors.
>
> >> >>> > > On Mon, Dec 12, 2011 at 10:39 PM, Alfonso Ariza Quintana <
>
> >> >>> > > aariza...@hotmail.com> wrote:
> >> >>> > > >   the compilation has failed.
> >> >>> > > > open the file RSVPPacket.msg write and delete a carriage return
> >> >>> (change
> >> >>> > > > the file date, you can also use the touch command)
> >> >>> > > > Continue building
>
> >> >>> > > >  *From:* naveen chauhan <navi9...@gmail.com>
> >> >>> > > > *Sent:* Monday, December 12, 2011 2:59 PM
> >> >>> > > > *To:* omn...@googlegroups.com

> >> >>> > > > *Subject:* Re: [Omnetpp-l] Problems withinetmanetin OMNeTpp 4.2

>
> >> >>> > > > there are 3 main errors--
> >> >>> > > > 1... Description Resource Path Location Type
> >> >>> > > > fatal error: RSVPPacket_m.h: No such file or directory RSVPPacket.h
> >> >>> > > > /inet/src/networklayer/rsvp_te line 19 C/C++ Problem
>
> >> >>> > > > 2... Description Resource Path Location Type
> >> >>> > > > make: *** [all] Error 2 inet C/C++ Problem
>
> >> >>> > > > 3.... Description Resource Path Location Type
> >> >>> > > > make[1]: *** [../out/gcc-debug/src/networklayer/rsvp_te/RSVP.o]
> >> >>> Error 1
> >> >>> > > > inet C/C++ Problem
>
> >> >>> > > > On Mon, Dec 12, 2011 at 7:18 PM, Alfonso Ariza Quintana <
> >> >>> > > > aariza...@hotmail.com> wrote:
>
> >> >>> > > >>   Have you checked that the compilation has finished successfully?
>
> >> >>> > > >>  *From:* naveen chauhan <navi9...@gmail.com>
> >> >>> > > >> *Sent:* Monday, December 12, 2011 1:31 PM
> >> >>> > > >>  *To:* omn...@googlegroups.com

> >> >>> > > >> *Subject:* Re: [Omnetpp-l] Problems withinetmanetin OMNeTpp 4.2

>
> >> >>> > > >>  wireless->wimax Qos and others,
>
> >> >>> > > >> On Mon, Dec 12, 2011 at 5:57 PM, naveen chauhan <
> >> >>> navi9...@gmail.com>wrote:
>
> >> >>> > > >>>   I am working on wimax security, so i need a code that can work
> >> >>> on
> >> >>> > > >>> wimax. numbat code is there but lots of error in that code. i
> >> >>> decided to
> >> >>> > > >>> switch oninetmanet.
>
> >> >>> > > >>> On Mon, Dec 12, 2011 at 5:44 PM, Alfonso Ariza Quintana <
> >> >>> > > >>> aariza...@hotmail.com> wrote:
>
> >> >>> > > >>>>  What example are you using?
>
> >> >>> > > >>>>  *From:* naveen chauhan <navi9...@gmail.com>
> >> >>> > > >>>> *Sent:* Monday, December 12, 2011 1:07 PM
> >> >>> > > >>>>  *To:* omn...@googlegroups.com

> >> >>> > > >>>> *Subject:* Re: [Omnetpp-l] Problems withinetmanetin OMNeTpp
> >> >>> 4.2
>
> >> >>> > > >>>>  I generated a newinetmanetproject and copy all other files
> >> >>> from
> >> >>> > > >>>> original place to
>
> ...
>
> read more »

[nael zuriek]

as naveen said , the package inetmanet-2.0 is more stable than
inetmanet , delete inetmanet (with its files) and try inetmanet-2.0 ..

you can get inetmanet-2.0 from : git://github.com/aarizaq/inetmanet-2.0.git ..

use http as a protocol ....

i used it and succeed to build it , the RSVPPacket.msg still exist but
you can solve it by the latest command I had referred to .

I'm using Omnet++4.2 under Win7 64-bit...

Don't forget to install WinPcaP first again ...

[Jose Carlos Quispe Chauca]

Dear Nael,

Tried your way 4 times now and still getting the same error working on
Omnetpp 4.2 in Win 7 x64

Can you zip your entire omnetpp with the inetmanet 2.0 build and send
that to me, I'm beggining to work on my thesis for Manetrouting and
really need the inetmanet up and running. I'll really appreciate your
help on the matter.

Thanks in advance for all your support,

Cheers

Jose Carlos

------------------------------------------------- Error
-------------------------------------------------
networklayer/rsvp_te/RSVPPacket.h:19:26: fatal error: RSVPPacket_m.h:

No such file or directory

compilation terminated.
make[1]: *** [../out/gcc-debug/src/networklayer/rsvp_te/RSVP.o] Error
1
make[1]: Leaving directory `/c/omnetpp-4.2/projects/inetmanet-2.0/src'

make: *** [all] Error 2

------------------------------------------------- Error
-------------------------------------------------

On Dec 23, 7:44 pm, nael zuriek <eng.nael.zur...@gmail.com> wrote:
> as naveen said , the packageinetmanet-2.0 is more stable thaninetmanet, deleteinetmanet(with its files) and tryinetmanet-2.0 ..
>

> you can getinetmanet-2.0 from : git://github.com/aarizaq/inetmanet-2.0.git ..

> ...
>
> read more »

[nael zuriek]

it's more than 1 GB !!!!!!!!

listen , do as follows :

1 : extract the zipped omnetpp file (which you downloaded from
omnetpp.org) directly into your C drive and build the simulator as
usual .

2 : bring inetmanet-2.0 as naveen and i said before and build it , the
RSVPPacket.msg problem still exist but you can solve it as follows :

- from mingw32 cd into "git"
- then cd into "inetmanet-2.0"
- then cd into "src"
- then cd into "networklayer"
- then cd into "rsvp_te"
- then write this command : opp_msgc RSVPPacket.msg

3: rebuild the project without cleaning it ....

that's what i did and worked for me >>

[Jose Carlos Quispe Chauca]

got it working now!!!

thanks Nael for the patience

Cheers

Jose Carlos

On Dec 24, 8:21 pm, nael zuriek <eng.nael.zur...@gmail.com> wrote:
> it's more than 1 GB !!!!!!!!
>
> listen , do as follows :
>
> 1 : extract the zipped omnetpp file (which you downloaded from
> omnetpp.org) directly into your C drive and build the simulator as
> usual .
>

> 2 : bringinetmanet-2.0 as naveen and i said before and build it , the

> RSVPPacket.msg problem still exist but you can solve it as follows :
>
>      - from mingw32 cd into "git"
>      - then cd into "inetmanet-2.0"
>      - then cd into "src"
>      - then cd into "networklayer"
>      - then cd into "rsvp_te"
>      - then write this command : opp_msgc RSVPPacket.msg
>
> 3: rebuild the project without cleaning it ....
>
> that's what i did and worked for me >>
>
> On Sun, Dec 25, 2011 at 2:56 AM, Jose Carlos Quispe Chauca
>
>
>
>
>
>
>
> <jcarlos.qui...@gmail.com> wrote:
> > Dear Nael,
>
> > Tried your way 4 times now and still getting the same error working on
> > Omnetpp 4.2 in Win 7 x64
>

> > Can you zip your entire omnetpp with theinetmanet2.0 build and send

> > that to me, I'm beggining to work on my thesis for Manetrouting and

> > really need theinetmanetup and running.  I'll really appreciate your

> ...
>
> read more »

[nael zuriek]

it's very nice to hear that ..... you were running the command
"opp_msgc" in the wrong directory ??

[Jose Carlos Quispe Chauca]

nope i was cleaning the project after running the command

On Dec 25 2011, 10:22 pm, nael zuriek <eng.nael.zur...@gmail.com>
wrote:

> ...
>
> read more »

[Mimzz]

Dear guys,

i installed inetmanet 2-0 and it's working perfectly...i was running the wpan csma802.15.4 example but i was wondering where can i find the logs? or the results for this example? such as graphs ?

[Alfonso Ariza Quintana]

no all the examples generate log or vec files, it's possible that you will need to modify the source code

---

Date: Tue, 18 Sep 2012 09:00:51 -0700
From: mim...@gmail.com
To: omn...@googlegroups.com
Subject: Re: [Omnetpp-l] Re: Problems with inetmanet in OMNeTpp 4.2

Dear guys,

i installed inetmanet 2-0 and it's working perfectly...i was running the wpan csma802.15.4 example but i was wondering where can i find the logs? or the results for this example? such as graphs ?

On Sunday, December 25, 2011 3:21:22 AM UTC+2, Naeel wrote:

it's more than 1 GB !!!!!!!!listen , do as follows :

--

[Naim Sanjakdar]

can you tell me how? cause i was searching for the vec ! but couldn't find any :S