Re: [DoES Liverpool] Digest for does-liverpool@googlegroups.com - 4 Messages in 4 Topics

[garry]

Re john's issue on the pump...

The Aldi pump from last yeah was utter shite, mine blew at about 60psi 

SportsDIrect had some muddy-fox track pumps for about £12 last time I was in there, I have one of them and its pretty sturdy

Garry

On Wed, May 2, 2012 at 9:47 AM, <does-li...@googlegroups.com> wrote:

  Today's Topic Summary

Group: http://groups.google.com/group/does-liverpool/topics

• Insights into building a hardware products company [1 Update]
• Bike Pump [1 Update]
• Pledge for Emotiv Development Kit [1 Update]
• [Open Manufacturing] [survey] Participate on a 3D printing community survey [1 Update]

 Insights into building a hardware products company

Adrian McEwen <adr...@mcqn.net> May 02 12:19AM +0100  

<blog.makezine.com/2012/04/30/makes-exclusive-interview-with-andrew-bunnie-huang-the-end-of-chumby-new-adventures/>
 
A long and really in-depth discussion with Bunnie Huang about the things
he learnt in building and selling the Chumby.
 
Cheers,
 
Adrian.


 

 Bike Pump

John McKerrell <jo...@mckerrell.net> May 01 01:27PM +0100  

Just an update on the bike pump pledge:
 
http://wiki.doesliverpool.com/PledgeBikePump
 
Apparently Aldi will have one for a fiver this week. I'm going to check it out and get it if it seems sturdy enough, if not I'll get one from Clas Ohlson for £15. I'll also get a bike repair kit from Clas Ohlson for a few quid. So by the end of the week we should have both and it'll cost £10-20.
 
John


 

 Pledge for Emotiv Development Kit

Adrian McEwen <adr...@mcqn.net> May 01 01:24PM +0100  

And another link to add to the mix
<http://people.ece.cornell.edu/land/courses/ece4760/FinalProjects/s2012/cwm55/cwm55_mj294/index.html>
- includes a schematic that doesn't look too complicated to build.
 
Adrian.
 
On 27/04/12 12:51, Andy Powell wrote:


 

 [Open Manufacturing] [survey] Participate on a 3D printing community survey

Adrian McEwen <adr...@mcqn.net> May 01 11:37AM +0100  

Surely we're a 3D printing community - it was the community that put the
CupCake together! :-)
 
Cheers,
 
Adrian.
 
-------- Original Message --------
Subject: [Open Manufacturing] [survey] Participate on a 3D printing
community survey
Date: Mon, 30 Apr 2012 23:26:24 -0700 (PDT)
From: kyyberi <jm6...@gmail.com>
Reply-To: openmanu...@googlegroups.com
To: openmanu...@googlegroups.com
 
 
 
[Warning! Not directly about hacking]
 
Hi,
We are inviting you to participate on a survey on individuals and
communities doing 3D printing:
http://surveys.peerproduction.net/ls/index.php?sid=51743.
 
The survey contains 20 questions, and typically it takes less than 5
minutes to complete. The survey is intended to give insights about 3D
printing communities to the people doing the printing, and we hope that
this will help in motivating you to take the time to participate!
 
The survey is a part of a newly founded initiative for open source
research on peer production (supported by the Peer to Peer Foundation,
more info at http://surveys.peerproduction.net/). All of the
(anonymised, of course!) data will be openly available on the survey site.
 
The questions have been prepared by Jarkko Moilanen and Tere Vadén and
the results with their analysis will be published during 2012.
For further information and questions (or if you want to help with the
survey or with peer to peer research more generally), contact
jar...@peerproduction.net or tere....@aalto.fi
 
Cheers,
 
Jarkko (IRC nick: kyyberi),
Maintainer
Statistical Studies of Peer Production
http://surveys.peerproduction.net
--
You received this message because you are subscribed to the Google
Groups "Open Manufacturing" group.
To view this discussion on the web visit
https://groups.google.com/d/msg/openmanufacturing/-/5mf60EYI_YYJ.
To post to this group, send email to openmanu...@googlegroups.com.
To unsubscribe from this group, send email to
openmanufactur...@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/openmanufacturing?hl=en.


 

You received this message because you are subscribed to the Google Group does-liverpool.
You can post via email.
To unsubscribe from this group, send an empty message.
For more options, visit this group.

--
find me on linkedin & twitter or read my blog