Can Linux get much worse?
Kadaitcha Man
Things are really fucking bad in Linux when you have to boot into fucking
Windows just to burn a DVD.
Fucking piece of shit, Linux.
--
Test signature
ray
If that were actually true - yes, it would be pretty bad.
Rick
.. lousy troll attempt.
--
Rick
Chris Ahlstrom
Indeed. I burn all my DVDs in Linux. Have *never* burnt a DVD in Windows.
Burnt a CD or two in Windows. It felt weird.
--
An exotic journey in downtown Newark is in your future.
Snit
8:10 PM:
> .. lousy troll attempt.
Better luck next time! :)
--
[INSERT .SIG HERE]
Snit
8:10 PM:
> On Tue, 05 Jan 2010 08:36:45 +0545, Kadaitcha Man wrote:
In your opinion.
--
[INSERT .SIG HERE]
AZ Nomad
Burning DVDs in linux is trivial to anybody who isn't a blithering
idiot like you.
Why the fuck are you so obsessed with an operating system you don't use?
I can think of nothing more pathetic.
AZ Nomad
>Rick pulled this Usenet boner:
>> On Tue, 05 Jan 2010 08:36:45 +0545, Kadaitcha Man wrote:
>>
>>> Some jingly toe-jam named descanted:
>>>
>>> Things are really fucking bad in Linux when you have to boot into
>>> fucking Windows just to burn a DVD.
>>>
>>> Fucking piece of shit, Linux.
>>
>> .. lousy troll attempt.
>Indeed. I burn all my DVDs in Linux. Have *never* burnt a DVD in Windows.
>Burnt a CD or two in Windows. It felt weird.
With the windows, you have the joy of having to stop using the
computer for anything. Let one of it's heavyweight apps do anything,
and the disk will be a coaster.
Snit
slrnhk5eg0.p...@ip70-176-155-130.ph.ph.cox.net on 1/4/10 9:03 PM:
You are not very imaginative. :)
--
[INSERT .SIG HERE]
TomB
> Rick pulled this Usenet boner:
>
>> On Tue, 05 Jan 2010 08:36:45 +0545, Kadaitcha Man wrote:
>>
>>> Some jingly toe-jam named descanted:
>>>
>>> Things are really fucking bad in Linux when you have to boot into
>>> fucking Windows just to burn a DVD.
>>>
>>> Fucking piece of shit, Linux.
>>
>> .. lousy troll attempt.
>
> Indeed. I burn all my DVDs in Linux. Have *never* burnt a DVD in Windows.
Never? Ever?
> Burnt a CD or two in Windows. It felt weird.
You did! Liar!
All kidding aside: I do burn CDs in Windows at work, but I just use
wodim and mkisofs/genisoimage (cygwin) :-)
--
No! Try not. Do... or do not. There is no try.
~ Yoda
Verbnigge Prettig Gestoorde Vlek
news:7qfoj5...@mid.individual.net:
It is bad. It is also true.
--
A test sig
Tony
tube rat or guinea pig testing some half-witted freeware piece of shit.
Kadaitcha Man wrote:
--
The Grandmaster of the CyberFROG
Come get your ticket to CyberFROG city
Nay, Art thou decideth playeth ye simpleton games. *Some* of us know proper
manners
Very few. I used to take calls from *rank* noobs but got fired the first day
on the job for potty mouth,
Hamster isn't a newsreader it's a mistake!
El-Gonzo Jackson FROGS both me and Chuckcar
Master Juba was a black man imitating a white man imitating a black man
Using my technical prowess and computer abilities to answer questions beyond
the realm of understandability
Regards Tony... Making usenet better for everyone everyday
Staaf ten Paardekut
news:slrnhk5eg0.p...@ip70-176-155-130.ph.ph.cox.net:
> On Tue, 05 Jan 2010 08:36:45 +0545, Kadaitcha Man <an...@no.email> wrote:
>>Some jingly toe-jam named descanted:
>
>>Things are really fucking bad in Linux when you have to boot into
>>fucking Windows just to burn a DVD.
>
>>Fucking piece of shit, Linux.
>
> Burning DVDs in linux is trivial to anybody who isn't a blithering idiot
> like you.
Go right ahead and blame anything other than the cleanly-installed piece
of shit Linux. Of course, clean-installing a different distro fixed it,
hey.boot@akhenaten:~$ cat/proc/cpuinfo
bash: cat/proc/cpuinfo: No such file or directory
boot@akhenaten:~$ cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 23
model name : Intel(R) Core(TM)2 Extreme CPU X9650 @ 3.00GHz
stepping : 6
cpu MHz : 2999.829
cache size : 6144 KB
physical id : 0
siblings : 4
core id : 0
cpu cores : 4
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe
syscall nx lm constant_tsc arch_perfmon pebs bts rep_good pni dtes64
monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 lahf_lm tpr_shadow
vnmi flexpriority
bogomips : 5999.65
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 23
model name : Intel(R) Core(TM)2 Extreme CPU X9650 @ 3.00GHz
stepping : 6
cpu MHz : 2999.829
cache size : 6144 KB
physical id : 0
siblings : 4
core id : 2
cpu cores : 4
apicid : 2
initial apicid : 2
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe
syscall nx lm constant_tsc arch_perfmon pebs bts rep_good pni dtes64
monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 lahf_lm tpr_shadow
vnmi flexpriority
bogomips : 5999.49
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
processor : 2
vendor_id : GenuineIntel
cpu family : 6
model : 23
model name : Intel(R) Core(TM)2 Extreme CPU X9650 @ 3.00GHz
stepping : 6
cpu MHz : 2999.829
cache size : 6144 KB
physical id : 0
siblings : 4
core id : 1
cpu cores : 4
apicid : 1
initial apicid : 1
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe
syscall nx lm constant_tsc arch_perfmon pebs bts rep_good pni dtes64
monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 lahf_lm tpr_shadow
vnmi flexpriority
bogomips : 5999.46
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
processor : 3
vendor_id : GenuineIntel
cpu family : 6
model : 23
model name : Intel(R) Core(TM)2 Extreme CPU X9650 @ 3.00GHz
stepping : 6
cpu MHz : 2999.829
cache size : 6144 KB
physical id : 0
siblings : 4
core id : 3
cpu cores : 4
apicid : 3
initial apicid : 3
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe
syscall nx lm constant_tsc arch_perfmon pebs bts rep_good pni dtes64
monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 lahf_lm tpr_shadow
vnmi flexpriority
bogomips : 5770.70
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
boot@akhenaten:~$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31-16-generic (buildd@crested) (gcc
version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #53-Ubuntu SMP Tue Dec 8 04:02:15
UTC 2009 (Ubuntu 2.6.31-16.53-generic)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-16-generic
root=UUID=ccf390b7-e7e5-4fb8-8fb0-756a944ab87d ro quiet splash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 0000000000090c00 (usable)
[ 0.000000] BIOS-e820: 0000000000090c00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cebc7000 (usable)
[ 0.000000] BIOS-e820: 00000000cebc7000 - 00000000cec5d000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cec5d000 - 00000000cfdd8000 (usable)
[ 0.000000] BIOS-e820: 00000000cfdd8000 - 00000000cfdda000 (reserved)
[ 0.000000] BIOS-e820: 00000000cfdda000 - 00000000cfe8e000 (usable)
[ 0.000000] BIOS-e820: 00000000cfe8e000 - 00000000cfee5000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cfee5000 - 00000000cfeea000 (usable)
[ 0.000000] BIOS-e820: 00000000cfeea000 - 00000000cfef2000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cfef2000 - 00000000cfef3000 (usable)
[ 0.000000] BIOS-e820: 00000000cfef3000 - 00000000cfeff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cfeff000 - 00000000cff00000 (usable)
[ 0.000000] BIOS-e820: 00000000cff00000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f8000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x230000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FF0000000 write-back
[ 0.000000] 3 base 0CFF00000 mask FFFF00000 uncachable
[ 0.000000] 4 base 100000000 mask F00000000 write-back
[ 0.000000] 5 base 200000000 mask F00000000 write-back
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
[ 0.000000] e820 update range: 00000000cff00000 - 0000000100000000
(usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcff00 max_arch_pfn = 0x400000000
[ 0.000000] e820 update range: 0000000000001000 - 0000000000006000
(usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable)
[ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 0000000000090c00 (usable)
[ 0.000000] modified: 0000000000090c00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000cebc7000 (usable)
[ 0.000000] modified: 00000000cebc7000 - 00000000cec5d000 (ACPI NVS)
[ 0.000000] modified: 00000000cec5d000 - 00000000cfdd8000 (usable)
[ 0.000000] modified: 00000000cfdd8000 - 00000000cfdda000 (reserved)
[ 0.000000] modified: 00000000cfdda000 - 00000000cfe8e000 (usable)
[ 0.000000] modified: 00000000cfe8e000 - 00000000cfee5000 (ACPI NVS)
[ 0.000000] modified: 00000000cfee5000 - 00000000cfeea000 (usable)
[ 0.000000] modified: 00000000cfeea000 - 00000000cfef2000 (ACPI data)
[ 0.000000] modified: 00000000cfef2000 - 00000000cfef3000 (usable)
[ 0.000000] modified: 00000000cfef3000 - 00000000cfeff000 (ACPI data)
[ 0.000000] modified: 00000000cfeff000 - 00000000cff00000 (usable)
[ 0.000000] modified: 00000000cff00000 - 00000000d0000000 (reserved)
[ 0.000000] modified: 00000000f0000000 - 00000000f8000000 (reserved)
[ 0.000000] modified: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000230000000 (usable)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cff00000
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] 0000000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cff00000 page 4k
[ 0.000000] kernel direct mapping tables up to cff00000 @ 8000-e000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000230000000
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] 0100000000 - 0230000000 page 2M
[ 0.000000] kernel direct mapping tables up to 230000000 @ c000-16000
[ 0.000000] RAMDISK: 375ba000 - 37fefbc3
[ 0.000000] ACPI: RSDP 00000000000fe020 00014 (v00 INTEL )
[ 0.000000] ACPI: RSDT 00000000cfefd038 00058 (v01 INTEL DX38BT
000007D6 01000013)
[ 0.000000] ACPI: FACP 00000000cfefc000 00074 (v01 INTEL DX38BT
000007D6 MSFT 01000013)
[ 0.000000] ACPI: DSDT 00000000cfef7000 040A6 (v01 INTEL DX38BT
000007D6 MSFT 01000013)
[ 0.000000] ACPI: FACS 00000000cfea0000 00040
[ 0.000000] ACPI: APIC 00000000cfef6000 00078 (v01 INTEL DX38BT
000007D6 MSFT 01000013)
[ 0.000000] ACPI: WDDT 00000000cfef5000 00040 (v01 INTEL DX38BT
000007D6 MSFT 01000013)
[ 0.000000] ACPI: MCFG 00000000cfef4000 0003C (v01 INTEL DX38BT
000007D6 MSFT 01000013)
[ 0.000000] ACPI: ASF! 00000000cfef3000 000A6 (v32 INTEL DX38BT
000007D6 MSFT 01000013)
[ 0.000000] ACPI: DMAR 00000000cfef1000 000F8 (v01 INTEL DX38BT
000007D6 MSFT 01000013)
[ 0.000000] ACPI: SSDT 00000000cfeee000 00204 (v01 INTEL CpuPm
000007D6 MSFT 01000013)
[ 0.000000] ACPI: SSDT 00000000cfeed000 001CF (v01 INTEL Cpu0Cst
000007D6 MSFT 01000013)
[ 0.000000] ACPI: SSDT 00000000cfeec000 001CF (v01 INTEL Cpu1Cst
000007D6 MSFT 01000013)
[ 0.000000] ACPI: SSDT 00000000cfeeb000 001CF (v01 INTEL Cpu2Cst
000007D6 MSFT 01000013)
[ 0.000000] ACPI: SSDT 00000000cfeea000 001CF (v01 INTEL Cpu3Cst
000007D6 MSFT 01000013)
[ 0.000000] ACPI: WDTT 00000000cfeef000 002CC (v01 INTEL DX38BT
000007D6 MSFT 01000013)
[ 0.000000] ACPI: ASPT 00000000cfef0000 00034 (v03 INTEL PerfTune
000007D6 MSFT 01000013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000230000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000230000000
[ 0.000000] NODE_DATA [0000000000011000 - 0000000000015fff]
[ 0.000000] bootmap [0000000000016000 - 000000000005bfff] pages 46
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 -
0230000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==>
[0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==>
[0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 00019e4ccc] TEXT DATA BSS ==>
[0001000000 - 00019e4ccc]
[ 0.000000] #3 [00375ba000 - 0037fefbc3] RAMDISK ==>
[00375ba000 - 0037fefbc3]
[ 0.000000] #4 [0000090c00 - 0000100000] BIOS reserved ==>
[0000090c00 - 0000100000]
[ 0.000000] #5 [00019e5000 - 00019e515e] BRK ==>
[00019e5000 - 00019e515e]
[ 0.000000] #6 [0000008000 - 000000c000] PGTABLE ==>
[0000008000 - 000000c000]
[ 0.000000] #7 [000000c000 - 0000011000] PGTABLE ==>
[000000c000 - 0000011000]
[ 0.000000] found SMP MP-table at [ffff8800000fe200] fe200
[ 0.000000] [ffffea0000000000-ffffea0007bfffff] PMD ->
[ffff880028600000-ffff88002f7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00230000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[9] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000001
[ 0.000000] 0: 0x00000006 -> 0x00000090
[ 0.000000] 0: 0x00000100 -> 0x000cebc7
[ 0.000000] 0: 0x000cec5d -> 0x000cfdd8
[ 0.000000] 0: 0x000cfdda -> 0x000cfe8e
[ 0.000000] 0: 0x000cfee5 -> 0x000cfeea
[ 0.000000] 0: 0x000cfef2 -> 0x000cfef3
[ 0.000000] 0: 0x000cfeff -> 0x000cff00
[ 0.000000] 0: 0x00100000 -> 0x00230000
[ 0.000000] On node 0 totalpages: 2096520
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 123 pages reserved
[ 0.000000] DMA zone: 3800 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 833077 pages, LIFO batch:31
[ 0.000000] Normal zone: 17024 pages used for memmap
[ 0.000000] Normal zone: 1228160 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI
0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000001000 -
0000000000006000
[ 0.000000] PM: Registered nosave memory: 0000000000090000 -
0000000000091000
[ 0.000000] PM: Registered nosave memory: 0000000000091000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 -
0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cebc7000 -
00000000cec5d000
[ 0.000000] PM: Registered nosave memory: 00000000cfdd8000 -
00000000cfdda000
[ 0.000000] PM: Registered nosave memory: 00000000cfe8e000 -
00000000cfee5000
[ 0.000000] PM: Registered nosave memory: 00000000cfeea000 -
00000000cfef2000
[ 0.000000] PM: Registered nosave memory: 00000000cfef3000 -
00000000cfeff000
[ 0.000000] PM: Registered nosave memory: 00000000cff00000 -
00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 -
00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 -
00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 -
00000000ffe00000
[ 0.000000] PM: Registered nosave memory: 00000000ffe00000 -
0000000100000000
[ 0.000000] Allocating PCI resources starting at d0000000 (gap:
d0000000:20000000)
[ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages at ffff880028035000, static data
90720 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 2065037
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-16-
generic root=UUID=ccf390b7-e7e5-4fb8-8fb0-756a944ab87d ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA -
bailing!
[ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000000] Placing 64MB software IO TLB between ffff880020000000 -
ffff880024000000
[ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000
[ 0.000000] Memory: 8181976k/9175040k available (5315k kernel code,
788960k absent, 204104k reserved, 3018k data, 660k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0,
CPUs=4, Nodes=1
[ 0.000000] NR_IRQS:4352 nr_irqs:440
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2999.829 MHz processor.
[ 0.001400] Console: colour VGA+ 80x25
[ 0.001402] console [tty0] enabled
[ 0.010000] allocated 83886080 bytes of page_cgroup
[ 0.010000] please try 'cgroup_disable=memory' option if you don't
want memory cgroups
[ 0.010008] Calibrating delay loop (skipped), value calculated using
timer frequency.. 5999.65 BogoMIPS (lpj=29998290)
[ 0.010030] Security Framework initialized
[ 0.010046] AppArmor: AppArmor initialized
[ 0.010529] Dentry cache hash table entries: 1048576 (order: 11,
8388608 bytes)
[ 0.013387] Inode-cache hash table entries: 524288 (order: 10, 4194304
bytes)
[ 0.014727] Mount-cache hash table entries: 256
[ 0.014836] Initializing cgroup subsys ns
[ 0.014841] Initializing cgroup subsys cpuacct
[ 0.014844] Initializing cgroup subsys memory
[ 0.014849] Initializing cgroup subsys freezer
[ 0.014850] Initializing cgroup subsys net_cls
[ 0.014860] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.014862] CPU: L2 cache: 6144K
[ 0.014864] CPU 0/0x0 -> Node 0
[ 0.014866] CPU: Physical Processor ID: 0
[ 0.014867] CPU: Processor Core ID: 0
[ 0.014869] mce: CPU supports 6 MCE banks
[ 0.014875] CPU0: Thermal monitoring enabled (TM2)
[ 0.014878] using mwait in idle threads.
[ 0.014879] Performance Counters: Core2 events, Intel PMU driver.
[ 0.014883] ... version: 2
[ 0.014884] ... bit width: 40
[ 0.014885] ... generic counters: 2
[ 0.014886] ... value mask: 000000ffffffffff
[ 0.014887] ... max period: 000000007fffffff
[ 0.014888] ... fixed-purpose counters: 3
[ 0.014889] ... counter mask: 0000000700000003
[ 0.016795] ACPI: Core revision 20090521
[ 0.024772] Setting APIC routing to flat
[ 0.025073] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.128686] CPU0: Intel(R) Core(TM)2 Extreme CPU X9650 @ 3.00GHz
stepping 06
[ 0.130000] Booting processor 1 APIC 0x2 ip 0x6000
[ 0.010000] Initializing CPU#1
[ 0.010000] Calibrating delay using timer specific routine.. 5999.49
BogoMIPS (lpj=29997478)
[ 0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.010000] CPU: L2 cache: 6144K
[ 0.010000] CPU 1/0x2 -> Node 0
[ 0.010000] CPU: Physical Processor ID: 0
[ 0.010000] CPU: Processor Core ID: 2
[ 0.010000] mce: CPU supports 6 MCE banks
[ 0.010000] CPU1: Thermal monitoring enabled (TM2)
[ 0.010000] x86 PAT enabled: cpu 1, old 0x7040600070406, new
0x7010600070106
[ 0.281512] CPU1: Intel(R) Core(TM)2 Extreme CPU X9650 @ 3.00GHz
stepping 06
[ 0.281518] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.290053] Booting processor 2 APIC 0x1 ip 0x6000
[ 0.010000] Initializing CPU#2
[ 0.010000] Calibrating delay using timer specific routine.. 5999.46
BogoMIPS (lpj=29997318)
[ 0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.010000] CPU: L2 cache: 6144K
[ 0.010000] CPU 2/0x1 -> Node 0
[ 0.010000] CPU: Physical Processor ID: 0
[ 0.010000] CPU: Processor Core ID: 1
[ 0.010000] mce: CPU supports 6 MCE banks
[ 0.010000] CPU2: Thermal monitoring enabled (TM2)
[ 0.010000] x86 PAT enabled: cpu 2, old 0x7040600070406, new
0x7010600070106
[ 0.451468] CPU2: Intel(R) Core(TM)2 Extreme CPU X9650 @ 3.00GHz
stepping 06
[ 0.451474] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.460085] Booting processor 3 APIC 0x3 ip 0x6000
[ 0.010000] Initializing CPU#3
[ 0.010000] Calibrating delay using timer specific routine.. 5770.70
BogoMIPS (lpj=28853510)
[ 0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.010000] CPU: L2 cache: 6144K
[ 0.010000] CPU 3/0x3 -> Node 0
[ 0.010000] CPU: Physical Processor ID: 0
[ 0.010000] CPU: Processor Core ID: 3
[ 0.010000] mce: CPU supports 6 MCE banks
[ 0.010000] CPU3: Thermal monitoring enabled (TM2)
[ 0.010000] x86 PAT enabled: cpu 3, old 0x7040600070406, new
0x7010600070106
[ 0.621484] CPU3: Intel(R) Core(TM)2 Extreme CPU X9650 @ 3.00GHz
stepping 06
[ 0.621492] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.630016] Brought up 4 CPUs
[ 0.630018] Total of 4 processors activated (23769.31 BogoMIPS).
[ 0.630066] CPU0 attaching sched-domain:
[ 0.630068] domain 0: span 0,2 level MC
[ 0.630069] groups: 0 2
[ 0.630072] domain 1: span 0-3 level CPU
[ 0.630074] groups: 0,2 1,3
[ 0.630078] CPU1 attaching sched-domain:
[ 0.630079] domain 0: span 1,3 level MC
[ 0.630080] groups: 1 3
[ 0.630083] domain 1: span 0-3 level CPU
[ 0.630084] groups: 1,3 0,2
[ 0.630087] CPU2 attaching sched-domain:
[ 0.630088] domain 0: span 0,2 level MC
[ 0.630090] groups: 2 0
[ 0.630092] domain 1: span 0-3 level CPU
[ 0.630093] groups: 0,2 1,3
[ 0.630096] CPU3 attaching sched-domain:
[ 0.630097] domain 0: span 1,3 level MC
[ 0.630099] groups: 3 1
[ 0.630101] domain 1: span 0-3 level CPU
[ 0.630102] groups: 1,3 0,2
[ 0.630200] Booting paravirtualized kernel on bare hardware
[ 0.630200] regulator: core version 0.5
[ 0.630200] Time: 4:50:22 Date: 01/05/10
[ 0.630200] NET: Registered protocol family 16
[ 0.630200] ACPI: bus type pci registered
[ 0.630207] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0
- 127
[ 0.630209] PCI: MCFG area at f0000000 reserved in E820
[ 0.633722] PCI: Using MMCONFIG at f0000000 - f7ffffff
[ 0.633723] PCI: Using configuration type 1 for base access
[ 0.634295] bio: create slab <bio-0> at 0
[ 0.634295] ACPI: EC: Look up EC in DSDT
[ 0.634295] ACPI: Interpreter enabled
[ 0.634295] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.634295] ACPI: Using IOAPIC for interrupt routing
[ 0.641891] ACPI: No dock devices found.
[ 0.642565] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.642640] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.642642] pci 0000:00:06.0: PME# disabled
[ 0.642687] pci 0000:00:19.0: reg 10 32bit mmio:
[0xe3100000-0xe311ffff]
[ 0.642692] pci 0000:00:19.0: reg 14 32bit mmio:
[0xe3124000-0xe3124fff]
[ 0.642696] pci 0000:00:19.0: reg 18 io port: [0x3400-0x341f]
[ 0.642726] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.642729] pci 0000:00:19.0: PME# disabled
[ 0.642767] pci 0000:00:1a.0: reg 20 io port: [0x30e0-0x30ff]
[ 0.642821] pci 0000:00:1a.1: reg 20 io port: [0x30c0-0x30df]
[ 0.642874] pci 0000:00:1a.2: reg 20 io port: [0x30a0-0x30bf]
[ 0.642931] pci 0000:00:1a.7: reg 10 32bit mmio:
[0xe3125c00-0xe3125fff]
[ 0.642975] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.642978] pci 0000:00:1a.7: PME# disabled
[ 0.643011] pci 0000:00:1b.0: reg 10 64bit mmio:
[0xe3120000-0xe3123fff]
[ 0.643043] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.643045] pci 0000:00:1b.0: PME# disabled
[ 0.643089] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.643092] pci 0000:00:1c.0: PME# disabled
[ 0.643139] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.643141] pci 0000:00:1c.4: PME# disabled
[ 0.643184] pci 0000:00:1d.0: reg 20 io port: [0x3080-0x309f]
[ 0.643238] pci 0000:00:1d.1: reg 20 io port: [0x3060-0x307f]
[ 0.643291] pci 0000:00:1d.2: reg 20 io port: [0x3040-0x305f]
[ 0.643348] pci 0000:00:1d.7: reg 10 32bit mmio:
[0xe3125800-0xe3125bff]
[ 0.643392] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.643395] pci 0000:00:1d.7: PME# disabled
[ 0.643493] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.643497] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6
ACPI/GPIO/TCO
[ 0.643500] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6
GPIO
[ 0.643502] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680
(mask 007f)
[ 0.643505] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0810
(mask 007f)
[ 0.643555] pci 0000:00:1f.2: reg 10 io port: [0x3428-0x342f]
[ 0.643559] pci 0000:00:1f.2: reg 14 io port: [0x3434-0x3437]
[ 0.643564] pci 0000:00:1f.2: reg 18 io port: [0x3420-0x3427]
[ 0.643568] pci 0000:00:1f.2: reg 1c io port: [0x3430-0x3433]
[ 0.643572] pci 0000:00:1f.2: reg 20 io port: [0x3020-0x303f]
[ 0.643576] pci 0000:00:1f.2: reg 24 32bit mmio:
[0xe3125000-0xe31257ff]
[ 0.643600] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.643602] pci 0000:00:1f.2: PME# disabled
[ 0.643623] pci 0000:00:1f.3: reg 10 64bit mmio:
[0xe3126000-0xe31260ff]
[ 0.643634] pci 0000:00:1f.3: reg 20 io port: [0x3000-0x301f]
[ 0.643669] pci 0000:01:00.0: reg 10 32bit mmio:
[0xe2000000-0xe2ffffff]
[ 0.643676] pci 0000:01:00.0: reg 14 64bit mmio:
[0xd0000000-0xdfffffff]
[ 0.643683] pci 0000:01:00.0: reg 1c 64bit mmio:
[0xe0000000-0xe1ffffff]
[ 0.643687] pci 0000:01:00.0: reg 24 io port: [0x2000-0x207f]
[ 0.643691] pci 0000:01:00.0: reg 30 32bit mmio:
[0xfffe0000-0xffffffff]
[ 0.643739] pci 0000:00:06.0: bridge io port: [0x2000-0x2fff]
[ 0.643741] pci 0000:00:06.0: bridge 32bit mmio:
[0xe0000000-0xe2ffffff]
[ 0.643744] pci 0000:00:06.0: bridge 64bit mmio pref:
[0xd0000000-0xdfffffff]
[ 0.643776] pci 0000:00:1c.0: bridge 32bit mmio:
[0xe3200000-0xe32fffff]
[ 0.643816] pci 0000:03:00.0: reg 10 io port: [0x1018-0x101f]
[ 0.643823] pci 0000:03:00.0: reg 14 io port: [0x1024-0x1027]
[ 0.643829] pci 0000:03:00.0: reg 18 io port: [0x1010-0x1017]
[ 0.643836] pci 0000:03:00.0: reg 1c io port: [0x1020-0x1023]
[ 0.643842] pci 0000:03:00.0: reg 20 io port: [0x1000-0x100f]
[ 0.643849] pci 0000:03:00.0: reg 24 32bit mmio:
[0xe3000000-0xe30003ff]
[ 0.643882] pci 0000:03:00.0: supports D1
[ 0.643883] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[ 0.643887] pci 0000:03:00.0: PME# disabled
[ 0.643925] pci 0000:00:1c.4: bridge io port: [0x1000-0x1fff]
[ 0.643928] pci 0000:00:1c.4: bridge 32bit mmio:
[0xe3000000-0xe30fffff]
[ 0.643970] pci 0000:00:1e.0: transparent bridge
[ 0.643989] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.644159] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[ 0.644265] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.644313] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 0.647062] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.647134] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12)
[ 0.647206] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.647276] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.647346] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11 12)
[ 0.647416] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.647486] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.647556] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.647665] SCSI subsystem initialized
[ 0.647690] libata version 3.00 loaded.
[ 0.647690] usbcore: registered new interface driver usbfs
[ 0.647690] usbcore: registered new interface driver hub
[ 0.647690] usbcore: registered new device driver usb
[ 0.647690] ACPI: WMI: Mapper loaded
[ 0.647690] PCI: Using ACPI for IRQ routing
[ 0.670004] Bluetooth: Core ver 2.15
[ 0.670015] NET: Registered protocol family 31
[ 0.670015] Bluetooth: HCI device and connection manager initialized
[ 0.670015] Bluetooth: HCI socket layer initialized
[ 0.670015] NetLabel: Initializing
[ 0.670015] NetLabel: domain hash size = 128
[ 0.670015] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.670023] NetLabel: unlabeled traffic allowed by default
[ 0.670133] hpet clockevent registered
[ 0.670135] HPET: 4 timers in total, 0 timers will be used for per-cpu
timer
[ 0.670139] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.670142] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.720004] pnp: PnP ACPI init
[ 0.720010] ACPI: bus type pnp registered
[ 0.721524] pnp: PnP ACPI: found 9 devices
[ 0.721525] ACPI: ACPI bus type pnp unregistered
[ 0.721532] system 00:01: iomem range 0xf0000000-0xf7ffffff has been
reserved
[ 0.721534] system 00:01: iomem range 0xfeb00000-0xfeb03fff has been
reserved
[ 0.721536] system 00:01: iomem range 0xfed13000-0xfed13fff has been
reserved
[ 0.721538] system 00:01: iomem range 0xfed14000-0xfed17fff has been
reserved
[ 0.721540] system 00:01: iomem range 0xfed18000-0xfed18fff has been
reserved
[ 0.721542] system 00:01: iomem range 0xfed19000-0xfed19fff has been
reserved
[ 0.721543] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been
reserved
[ 0.721545] system 00:01: iomem range 0xfed20000-0xfed3ffff has been
reserved
[ 0.721547] system 00:01: iomem range 0xfed45000-0xfed99fff has been
reserved
[ 0.721549] system 00:01: iomem range 0xc0000-0xdffff has been reserved
[ 0.721551] system 00:01: iomem range 0xe0000-0xfffff could not be
reserved
[ 0.721553] system 00:01: iomem range 0xffc00000-0xffffffff could not
be reserved
[ 0.721557] system 00:06: ioport range 0x500-0x53f has been reserved
[ 0.721559] system 00:06: ioport range 0x400-0x47f has been reserved
[ 0.721560] system 00:06: ioport range 0x680-0x6ff has been reserved
[ 0.726174] AppArmor: AppArmor Filesystem Enabled
[ 0.726185] pci 0000:01:00.0: BAR 6: no parent found for of device
[0xfffe0000-0xffffffff]
[ 0.726206] pci 0000:01:00.0: BAR 6: can't allocate mem resource
[0xe0000000-0xdfffffff]
[ 0.726208] pci 0000:00:06.0: PCI bridge, secondary bus 0000:01
[ 0.726210] pci 0000:00:06.0: IO window: 0x2000-0x2fff
[ 0.726212] pci 0000:00:06.0: MEM window: 0xe0000000-0xe2ffffff
[ 0.726215] pci 0000:00:06.0: PREFETCH window:
0x000000d0000000-0x000000dfffffff
[ 0.726218] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.726219] pci 0000:00:1c.0: IO window: disabled
[ 0.726222] pci 0000:00:1c.0: MEM window: 0xe3200000-0xe32fffff
[ 0.726225] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.726228] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03
[ 0.726230] pci 0000:00:1c.4: IO window: 0x1000-0x1fff
[ 0.726233] pci 0000:00:1c.4: MEM window: 0xe3000000-0xe30fffff
[ 0.726236] pci 0000:00:1c.4: PREFETCH window: disabled
[ 0.726239] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[ 0.726240] pci 0000:00:1e.0: IO window: disabled
[ 0.726243] pci 0000:00:1e.0: MEM window: disabled
[ 0.726246] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.726251] alloc irq_desc for 16 on node 0
[ 0.726253] alloc kstat_irqs on node 0
[ 0.726256] pci 0000:00:06.0: PCI INT A -> GSI 16 (level, low) -> IRQ
16
[ 0.726258] pci 0000:00:06.0: setting latency timer to 64
[ 0.726263] pci 0000:00:1c.0: enabling device (0000 -> 0002)
[ 0.726265] alloc irq_desc for 17 on node 0
[ 0.726266] alloc kstat_irqs on node 0
[ 0.726268] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ
17
[ 0.726272] pci 0000:00:1c.0: setting latency timer to 64
[ 0.726277] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ
17
[ 0.726279] pci 0000:00:1c.4: setting latency timer to 64
[ 0.726284] pci 0000:00:1e.0: setting latency timer to 64
[ 0.726286] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.726288] pci_bus 0000:00: resource 1 mem:
[0x000000-0xffffffffffffffff]
[ 0.726289] pci_bus 0000:01: resource 0 io: [0x2000-0x2fff]
[ 0.726291] pci_bus 0000:01: resource 1 mem: [0xe0000000-0xe2ffffff]
[ 0.726293] pci_bus 0000:01: resource 2 pref mem
[0xd0000000-0xdfffffff]
[ 0.726294] pci_bus 0000:02: resource 1 mem: [0xe3200000-0xe32fffff]
[ 0.726296] pci_bus 0000:03: resource 0 io: [0x1000-0x1fff]
[ 0.726297] pci_bus 0000:03: resource 1 mem: [0xe3000000-0xe30fffff]
[ 0.726299] pci_bus 0000:04: resource 3 io: [0x00-0xffff]
[ 0.726300] pci_bus 0000:04: resource 4 mem:
[0x000000-0xffffffffffffffff]
[ 0.726319] NET: Registered protocol family 2
[ 0.726484] IP route cache hash table entries: 262144 (order: 9,
2097152 bytes)
[ 0.727332] TCP established hash table entries: 524288 (order: 11,
8388608 bytes)
[ 0.729696] TCP bind hash table entries: 65536 (order: 8, 1048576
bytes)
[ 0.730061] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.730063] TCP reno registered
[ 0.730155] NET: Registered protocol family 1
[ 0.730201] Trying to unpack rootfs image as initramfs...
[ 0.894959] Freeing initrd memory: 10454k freed
[ 0.897965] Scanning for low memory corruption every 60 seconds
[ 0.898068] audit: initializing netlink socket (disabled)
[ 0.898080] type=2000 audit(1262667021.889:1): initialized
[ 0.905027] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.906001] VFS: Disk quotas dquot_6.5.2
[ 0.906039] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.906438] fuse init (API version 7.12)
[ 0.906491] msgmni has been set to 16000
[ 0.906676] alg: No test for stdrng (krng)
[ 0.906683] io scheduler noop registered
[ 0.906685] io scheduler anticipatory registered
[ 0.906687] io scheduler deadline registered
[ 0.906712] io scheduler cfq registered (default)
[ 0.907037] pci 0000:01:00.0: Boot video device
[ 0.907125] alloc irq_desc for 24 on node 0
[ 0.907126] alloc kstat_irqs on node 0
[ 0.907133] pcieport-driver 0000:00:06.0: irq 24 for MSI/MSI-X
[ 0.907137] pcieport-driver 0000:00:06.0: setting latency timer to 64
[ 0.907225] alloc irq_desc for 25 on node 0
[ 0.907226] alloc kstat_irqs on node 0
[ 0.907231] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.907237] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.907338] alloc irq_desc for 26 on node 0
[ 0.907340] alloc kstat_irqs on node 0
[ 0.907345] pcieport-driver 0000:00:1c.4: irq 26 for MSI/MSI-X
[ 0.907350] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[ 0.907419] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.907467] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.907548] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/
input/input0
[ 0.907551] ACPI: Power Button [PWRF]
[ 0.907585] input: Sleep Button as /devices/LNXSYSTM:00/device:00/
PNP0C0E:00/input/input1
[ 0.907590] ACPI: Sleep Button [SLPB]
[ 0.907866] Monitor-Mwait will be used to enter C-1 state
[ 0.907887] processor LNXCPU:00: registered as cooling_device0
[ 0.907890] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 0.908064] processor LNXCPU:01: registered as cooling_device1
[ 0.908066] ACPI: Processor [CPU2] (supports 8 throttling states)
[ 0.908275] processor LNXCPU:02: registered as cooling_device2
[ 0.908279] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 0.908463] processor LNXCPU:03: registered as cooling_device3
[ 0.908466] ACPI: Processor [CPU3] (supports 8 throttling states)
[ 0.910115] Linux agpgart interface v0.103
[ 0.910121] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.910214] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
[ 0.910936] brd: module loaded
[ 0.911216] loop: module loaded
[ 0.911260] input: Macintosh mouse button emulation as /devices/
virtual/input/input2
[ 0.911332] ahci 0000:00:1f.2: version 3.0
[ 0.911343] alloc irq_desc for 21 on node 0
[ 0.911344] alloc kstat_irqs on node 0
[ 0.911347] ahci 0000:00:1f.2: PCI INT A -> GSI 21 (level, low) -> IRQ
21
[ 0.911371] alloc irq_desc for 27 on node 0
[ 0.911372] alloc kstat_irqs on node 0
[ 0.911377] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
[ 0.911437] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps
0x3f impl RAID mode
[ 0.911439] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio slum
part ems
[ 0.911442] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.010024] scsi0 : ahci
[ 1.010079] scsi1 : ahci
[ 1.010117] scsi2 : ahci
[ 1.010154] scsi3 : ahci
[ 1.010192] scsi4 : ahci
[ 1.010229] scsi5 : ahci
[ 1.010302] ata1: SATA max UDMA/133 abar m2048@0xe3125000 port
0xe3125100 irq 27
[ 1.010304] ata2: SATA max UDMA/133 irq_stat 0x00400040, connection
status changed irq 27
[ 1.010306] ata3: SATA max UDMA/133 irq_stat 0x00400040, connection
status changed irq 27
[ 1.010308] ata4: SATA max UDMA/133 irq_stat 0x00400040, connection
status changed
[ 1.010310] ata5: SATA max UDMA/133 irq_stat 0x00400040, connection
status changed
[ 1.010312] ata6: SATA max UDMA/133 irq_stat 0x00400040, connection
status changed
[ 1.010649] pata_marvell 0000:03:00.0: PCI INT A -> GSI 16 (level,
low) -> IRQ 16
[ 1.010671] pata_marvell 0000:03:00.0: setting latency timer to 64
[ 1.010716] scsi6 : pata_marvell
[ 1.010758] scsi7 : pata_marvell
[ 1.010778] ata7: PATA max UDMA/100 cmd 0x1018 ctl 0x1024 bmdma 0x1000
irq 16
[ 1.010780] ata8: PATA max UDMA/133 cmd 0x1010 ctl 0x1020 bmdma 0x1008
irq 16
[ 1.011074] Fixed MDIO Bus: probed
[ 1.011098] PPP generic driver version 2.4.2
[ 1.011150] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.011192] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 17 (level, low) ->
IRQ 17
[ 1.011204] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.011208] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.011254] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned
bus number 1
[ 1.015135] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.015139] ehci_hcd 0000:00:1a.7: cache line size of 32 is not
supported
[ 1.015147] ehci_hcd 0000:00:1a.7: irq 17, io mem 0xe3125c00
[ 1.029991] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.030035] usb usb1: configuration #1 chosen from 1 choice
[ 1.030055] hub 1-0:1.0: USB hub found
[ 1.030060] hub 1-0:1.0: 6 ports detected
[ 1.030118] alloc irq_desc for 23 on node 0
[ 1.030119] alloc kstat_irqs on node 0
[ 1.030124] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) ->
IRQ 23
[ 1.030131] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.030133] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.030155] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned
bus number 2
[ 1.034055] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.034060] ehci_hcd 0000:00:1d.7: cache line size of 32 is not
supported
[ 1.034068] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe3125800
[ 1.049990] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.050026] usb usb2: configuration #1 chosen from 1 choice
[ 1.050044] hub 2-0:1.0: USB hub found
[ 1.050048] hub 2-0:1.0: 6 ports detected
[ 1.050091] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.050100] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.050157] alloc irq_desc for 18 on node 0
[ 1.050159] alloc kstat_irqs on node 0
[ 1.050162] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 18 (level, low) ->
IRQ 18
[ 1.050166] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.050168] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.050192] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned
bus number 3
[ 1.050216] uhci_hcd 0000:00:1a.0: irq 18, io base 0x000030e0
[ 1.050267] usb usb3: configuration #1 chosen from 1 choice
[ 1.050283] hub 3-0:1.0: USB hub found
[ 1.050287] hub 3-0:1.0: 2 ports detected
[ 1.050338] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) ->
IRQ 21
[ 1.050342] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.050344] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.050364] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned
bus number 4
[ 1.050388] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000030c0
[ 1.050437] usb usb4: configuration #1 chosen from 1 choice
[ 1.050455] hub 4-0:1.0: USB hub found
[ 1.050459] hub 4-0:1.0: 2 ports detected
[ 1.050508] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 17 (level, low) ->
IRQ 17
[ 1.050513] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1.050515] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.050540] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned
bus number 5
[ 1.050558] uhci_hcd 0000:00:1a.2: irq 17, io base 0x000030a0
[ 1.050608] usb usb5: configuration #1 chosen from 1 choice
[ 1.050627] hub 5-0:1.0: USB hub found
[ 1.050631] hub 5-0:1.0: 2 ports detected
[ 1.050680] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) ->
IRQ 23
[ 1.050684] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.050687] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.050708] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 6
[ 1.050727] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003080
[ 1.050773] usb usb6: configuration #1 chosen from 1 choice
[ 1.050792] hub 6-0:1.0: USB hub found
[ 1.050797] hub 6-0:1.0: 2 ports detected
[ 1.050845] alloc irq_desc for 19 on node 0
[ 1.050846] alloc kstat_irqs on node 0
[ 1.050849] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) ->
IRQ 19
[ 1.050853] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.050855] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.050877] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
bus number 7
[ 1.050900] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003060
[ 1.050949] usb usb7: configuration #1 chosen from 1 choice
[ 1.050965] hub 7-0:1.0: USB hub found
[ 1.050969] hub 7-0:1.0: 2 ports detected
[ 1.051019] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) ->
IRQ 18
[ 1.051023] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.051025] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.051045] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
bus number 8
[ 1.051063] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003040
[ 1.051115] usb usb8: configuration #1 chosen from 1 choice
[ 1.051131] hub 8-0:1.0: USB hub found
[ 1.051135] hub 8-0:1.0: 2 ports detected
[ 1.051199] PNP: No PS/2 controller found. Probing ports directly.
[ 1.054047] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.054051] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.054097] mice: PS/2 mouse device common for all mice
[ 1.054164] rtc_cmos 00:03: RTC can wake from S4
[ 1.054185] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.054205] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 1.054269] device-mapper: uevent: version 1.0.3
[ 1.054319] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01)
initialised: dm-d...@redhat.com
[ 1.054378] device-mapper: multipath: version 1.1.0 loaded
[ 1.054381] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.054521] cpuidle: using governor ladder
[ 1.054523] cpuidle: using governor menu
[ 1.054781] TCP cubic registered
[ 1.054864] NET: Registered protocol family 10
[ 1.055147] lo: Disabled Privacy Extensions
[ 1.055336] NET: Registered protocol family 17
[ 1.055350] Bluetooth: L2CAP ver 2.13
[ 1.055351] Bluetooth: L2CAP socket layer initialized
[ 1.055353] Bluetooth: SCO (Voice Link) ver 0.6
[ 1.055355] Bluetooth: SCO socket layer initialized
[ 1.055371] Bluetooth: RFCOMM TTY layer initialized
[ 1.055374] Bluetooth: RFCOMM socket layer initialized
[ 1.055375] Bluetooth: RFCOMM ver 1.11
[ 1.055437] PM: Resume from disk failed.
[ 1.055445] registered taskstats version 1
[ 1.055522] Magic number: 10:551:817
[ 1.055574] rtc_cmos 00:03: setting system clock to 2010-01-05
04:50:22 UTC (1262667022)
[ 1.055576] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.055577] EDD information not available.
[ 1.171473] Switched to high resolution mode on CPU 2
[ 1.171489] Switched to high resolution mode on CPU 3
[ 1.171515] Switched to high resolution mode on CPU 1
[ 1.179982] Switched to high resolution mode on CPU 0
[ 1.363766] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.367852] ata1.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN01, max
UDMA/100, ATAPI AN
[ 1.372164] ata1.00: configured for UDMA/100
[ 1.380184] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS50
TN01 PQ: 0 ANSI: 5
[ 1.401158] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/
form2 cdda tray
[ 1.401160] Uniform CD-ROM driver Revision: 3.20
[ 1.401206] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.401233] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.630005] usb 3-2: new low speed USB device using uhci_hcd and
address 2
[ 1.760012] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.760023] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.760034] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.760045] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.760055] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.761178] ata3.00: ATA-6: ST3500320NS, SN04, max UDMA/133
[ 1.761180] ata3.00: 976773168 sectors, multi 0: LBA48 NCQ (depth
31/32)
[ 1.761241] ata5.00: ATA-8: ST3500320AS, SD15, max UDMA/133
[ 1.761243] ata5.00: 976773168 sectors, multi 0: LBA48 NCQ (depth
31/32)
[ 1.761467] ata4.00: ATA-8: ST3500320AS, SD1A, max UDMA/133
[ 1.761469] ata4.00: 976773168 sectors, multi 0: LBA48 NCQ (depth
31/32)
[ 1.762768] ata3.00: configured for UDMA/133
[ 1.762923] ata5.00: configured for UDMA/133
[ 1.762969] ata2.00: ATA-7: SAMSUNG SP2504C, VT100-41, max UDMA7
[ 1.762971] ata2.00: 488397168 sectors, multi 0: LBA48 NCQ (depth
31/32)
[ 1.763355] ata4.00: configured for UDMA/133
[ 1.780543] ata6.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
[ 1.780544] ata6.00: 976773168 sectors, multi 0: LBA48 NCQ (depth
31/32)
[ 1.782491] ata6.00: configured for UDMA/133
[ 1.785320] ata2.00: configured for UDMA/133
[ 1.785369] scsi 1:0:0:0: Direct-Access ATA SAMSUNG SP2504C
VT10 PQ: 0 ANSI: 5
[ 1.785451] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.785454] sd 1:0:0:0: [sda] 488397168 512-byte logical blocks: (250
GB/232 GiB)
[ 1.785488] sd 1:0:0:0: [sda] Write Protect is off
[ 1.785490] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.785505] scsi 2:0:0:0: Direct-Access ATA ST3500320NS
SN04 PQ: 0 ANSI: 5
[ 1.785508] sd 1:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 1.785582] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 1.785607] sda:
[ 1.785611] sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500
GB/465 GiB)
[ 1.785642] sd 2:0:0:0: [sdb] Write Protect is off
[ 1.785644] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.785660] sd 2:0:0:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 1.785747] sdb:
[ 1.785801] scsi 3:0:0:0: Direct-Access ATA ST3500320AS
SD1A PQ: 0 ANSI: 5
[ 1.785870] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 1.785892] sd 3:0:0:0: [sdc] 976773168 512-byte logical blocks: (500
GB/465 GiB)
[ 1.785923] sd 3:0:0:0: [sdc] Write Protect is off
[ 1.785925] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.785940] sd 3:0:0:0: [sdc] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 1.786010] sdc:
[ 1.786055] scsi 4:0:0:0: Direct-Access ATA ST3500320AS
SD15 PQ: 0 ANSI: 5
[ 1.786120] sd 4:0:0:0: Attached scsi generic sg4 type 0
[ 1.786142] sd 4:0:0:0: [sdd] 976773168 512-byte logical blocks: (500
GB/465 GiB)
[ 1.786169] scsi 5:0:0:0: Direct-Access ATA SAMSUNG HD501LJ
CR10 PQ: 0 ANSI: 5
[ 1.786171] sd 4:0:0:0: [sdd] Write Protect is off
[ 1.786173] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 1.786188] sd 4:0:0:0: [sdd] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 1.786257] sd 5:0:0:0: Attached scsi generic sg5 type 0
[ 1.786263] sdd:
[ 1.786280] sd 5:0:0:0: [sde] 976773168 512-byte logical blocks: (500
GB/465 GiB)
[ 1.786308] sd 5:0:0:0: [sde] Write Protect is off
[ 1.786310] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 1.786325] sd 5:0:0:0: [sde] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 1.786395] sde: sde1
[ 1.791375] sde: p1 size 2930296832 exceeds device capacity, limited
to end of disk
[ 1.791504] sd 5:0:0:0: [sde] Attached SCSI disk
[ 1.792246] sda1 sda2 < sdd1
[ 1.804485] sd 4:0:0:0: [sdd] Attached SCSI disk
[ 1.807249] sdb1
[ 1.807251] sdb: p1 size 2930296832 exceeds device capacity, limited
to end of disk
[ 1.807285] sdc1
[ 1.807386] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 1.807425] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 1.816225] usb 3-2: configuration #1 chosen from 1 choice
[ 1.817286] sda5 >
[ 1.817427] sd 1:0:0:0: [sda] Attached SCSI disk
[ 2.090004] usb 8-2: new low speed USB device using uhci_hcd and
address 2
[ 2.332047] usb 8-2: configuration #1 chosen from 1 choice
[ 6.210032] ata7.00: qc timeout (cmd 0x27)
[ 6.210037] ata7.00: failed to read native max address (err_mask=0x4)
[ 16.410030] ata7.00: qc timeout (cmd 0x27)
[ 16.410036] ata7.00: failed to read native max address (err_mask=0x4)
[ 26.610031] ata7.00: qc timeout (cmd 0x27)
[ 26.610036] ata7.00: failed to read native max address (err_mask=0x4)
[ 31.790038] ata7.01: qc timeout (cmd 0x27)
[ 31.790043] ata7.01: failed to read native max address (err_mask=0x4)
[ 41.970030] ata7.01: qc timeout (cmd 0x27)
[ 41.970036] ata7.01: failed to read native max address (err_mask=0x4)
[ 52.150030] ata7.01: qc timeout (cmd 0x27)
[ 52.150036] ata7.01: failed to read native max address (err_mask=0x4)
[ 52.480762] Freeing unused kernel memory: 660k freed
[ 52.480905] Write protecting the kernel read-only data: 7584k
[ 52.540189] ramzswap: disk size set to 2048272 kB
[ 52.555811] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[ 52.555813] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 52.555910] alloc irq_desc for 20 on node 0
[ 52.555912] alloc kstat_irqs on node 0
[ 52.555918] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) ->
IRQ 20
[ 52.555923] e1000e 0000:00:19.0: pci_enable_pcie_error_reporting
failed 0xfffffffb
[ 52.555927] e1000e 0000:00:19.0: setting latency timer to 64
[ 52.556002] alloc irq_desc for 28 on node 0
[ 52.556003] alloc kstat_irqs on node 0
[ 52.556010] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
[ 52.568892] usbcore: registered new interface driver hiddev
[ 52.584547] input: BTC USB Multimedia Keyboard as /devices/
pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input3
[ 52.584603] generic-usb 0003:046D:C313.0001: input,hidraw0: USB HID
v1.10 Keyboard [BTC USB Multimedia Keyboard] on usb-0000:00:1a.0-2/input0
[ 52.590091] Adding 2048268k swap on /dev/ramzswap0. Priority:100
extents:1 across:2048268k SSD
[ 52.628367] input: BTC USB Multimedia Keyboard as /devices/
pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.1/input/input4
[ 52.628433] generic-usb 0003:046D:C313.0002: input,hiddev96,hidraw1:
USB HID v1.10 Device [BTC USB Multimedia Keyboard] on usb-0000:00:1a.0-2/
input1
[ 52.642350] input: Microsoft Microsoft Basic Optical Mouse as /
devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input5
[ 52.642393] generic-usb 0003:045E:0084.0003: input,hidraw2: USB HID
v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse ] on
usb-0000:00:1d.2-2/input0
[ 52.642404] usbcore: registered new interface driver usbhid
[ 52.642406] usbhid: v2.6:USB HID core driver
[ 52.994807] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1)
00:1c:c0:2e:8a:c3
[ 52.994809] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 52.994830] 0000:00:19.0: eth0: MAC: 7, PHY: 6, PBA No: ffffff-0ff
[ 73.024196] xor: automatically using best checksumming function:
generic_sse
[ 73.073748] generic_sse: 11166.000 MB/sec
[ 73.073751] xor: using function: generic_sse (11166.000 MB/sec)
[ 73.075214] device-mapper: dm-raid45: initialized v0.2594b
[ 73.762532] device-mapper: dm-raid45: /dev/sdb is raid disk 0
[ 73.762535] device-mapper: dm-raid45: /dev/sdc is raid disk 1
[ 73.762536] device-mapper: dm-raid45: /dev/sdd is raid disk 2
[ 73.762538] device-mapper: dm-raid45: /dev/sde is raid disk 3
[ 73.762540] device-mapper: dm-raid45: 128/128/256 sectors chunk/io/
recovery size, 80 stripes
[ 73.762541] algorithm "xor_blocks", 4 chunks with 10612MB/s
[ 73.762541] RAID5 (left asymmetric) set with net 3/4 devices
[ 75.219729] PM: Starting manual resume from disk
[ 75.219731] PM: Resume from partition 8:5
[ 75.219733] PM: Checking hibernation image.
[ 75.219861] PM: Resume from disk failed.
[ 75.233833] EXT4-fs (sda1): barriers enabled
[ 75.246958] kjournald2 starting: pid 642, dev sda1:8, commit interval
5 seconds
[ 75.246974] EXT4-fs (sda1): delayed allocation enabled
[ 75.246977] EXT4-fs: file extents enabled
[ 75.257223] EXT4-fs: mballoc enabled
[ 75.257234] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 76.598195] Adding 9936160k swap on /dev/sda5. Priority:-1 extents:1
across:9936160k
[ 76.864784] EXT4-fs (sda1): internal journal on sda1:8
[ 77.506593] udev: starting version 147
[ 78.590970] lp: driver loaded but no devices found
[ 79.921130] nvidia: module license 'NVIDIA' taints kernel.
[ 79.921134] Disabling lock debugging due to kernel taint
[ 79.927131] EDAC MC: Ver: 2.1.0 Dec 8 2009
[ 79.929054] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 80.174268] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
[ 80.174274] nvidia 0000:01:00.0: setting latency timer to 64
[ 80.174353] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 185.18.36
Fri Aug 14 17:35:21 PDT 2009
[ 80.254853] EDAC MC0: Giving out device to 'x38_edac' 'x38': DEV
0000:00:00.0
[ 81.559416] alloc irq_desc for 22 on node 0
[ 81.559418] alloc kstat_irqs on node 0
[ 81.559423] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -
> IRQ 22
[ 81.559461] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 81.824880] input: HDA Digital PCBeep as /devices/
pci0000:00/0000:00:1b.0/input/input6
[ 82.230086] input: HDA Intel Line In at Ext Rear Jack as /devices/
pci0000:00/0000:00:1b.0/sound/card0/input7
[ 82.230138] input: HDA Intel Mic at Ext Front Jack as /devices/
pci0000:00/0000:00:1b.0/sound/card0/input8
[ 82.230177] input: HDA Intel Mic at Ext Rear Jack as /devices/
pci0000:00/0000:00:1b.0/sound/card0/input9
[ 82.230213] input: HDA Intel Speaker at Ext Rear Jack as /devices/
pci0000:00/0000:00:1b.0/sound/card0/input10
[ 82.230249] input: HDA Intel Speaker at Ext Rear Jack as /devices/
pci0000:00/0000:00:1b.0/sound/card0/input11
[ 82.230285] input: HDA Intel Speaker at Ext Rear Jack as /devices/
pci0000:00/0000:00:1b.0/sound/card0/input12
[ 82.230320] input: HDA Intel HP Out at Ext Front Jack as /devices/
pci0000:00/0000:00:1b.0/sound/card0/input13
[ 83.351382] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
[ 83.411284] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
[ 83.411929] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 83.426744] type=1505 audit(1262667104.868:2):
operation="profile_load" pid=1349 name=/usr/share/gdm/guest-session/
Xsession
[ 83.519541] type=1505 audit(1262667104.958:3):
operation="profile_load" pid=1355 name=/sbin/dhclient3
[ 83.520012] type=1505 audit(1262667104.958:4):
operation="profile_load" pid=1355 name=/usr/lib/NetworkManager/nm-dhcp-
client.action
[ 83.520271] type=1505 audit(1262667104.958:5):
operation="profile_load" pid=1355 name=/usr/lib/connman/scripts/dhclient-
script
[ 83.560031] type=1505 audit(1262667104.998:6):
operation="profile_load" pid=1361 name=/usr/bin/evince
[ 83.567598] type=1505 audit(1262667105.008:7):
operation="profile_load" pid=1361 name=/usr/bin/evince-previewer
[ 83.572079] type=1505 audit(1262667105.008:8):
operation="profile_load" pid=1361 name=/usr/bin/evince-thumbnailer
[ 83.601801] type=1505 audit(1262667105.038:9):
operation="profile_load" pid=1381 name=/usr/bin/freshclam
[ 83.635399] type=1505 audit(1262667105.078:10):
operation="profile_load" pid=1382 name=/usr/lib/cups/backend/cups-pdf
[ 83.635958] type=1505 audit(1262667105.078:11):
operation="profile_load" pid=1382 name=/usr/sbin/cupsd
[ 84.843357] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow
Control: RX/TX
[ 84.843360] 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[ 84.843964] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 88.441159] usplash:555 freeing invalid memtype ffffffffe1000000-
ffffffffe1e00000
[ 88.933673] vboxdrv: Trying to deactivate the NMI watchdog
permanently...
[ 88.933676] vboxdrv: Successfully done.
[ 88.933677] vboxdrv: Found 4 processor cores.
[ 88.933715] VBoxDrv: dbg - g_abExecMemory=ffffffffa0bc5420
[ 88.933765] vboxdrv: fAsync=0 offMin=0x3c3 offMax=0x73a1
[ 88.933793] vboxdrv: TSC mode is 'synchronous', kernel timer mode is
'normal'.
[ 88.933795] vboxdrv: Successfully loaded version 3.0.8_OSE (interface
0x000e0000).
[ 88.936183] VBoxNetAdp: dbg - g_abExecMemory=ffffffffa0d62ac0
[ 88.939366] VBoxNetFlt: dbg - g_abExecMemory=ffffffffa0d7d1c0
[ 90.108337] ppdev: user-space parallel port driver
[ 95.822504] eth0: no IPv6 routers present
[ 230.290013] warning: `VirtualBox' uses 32-bit capabilities (legacy
support in use)
[ 696.554558] device eth0 entered promiscuous mode
[ 1148.144122] device eth0 left promiscuous mode
[ 1315.898407] device eth0 entered promiscuous mode
[ 3335.456018] device eth0 left promiscuous mode
[ 6633.575757] __ratelimit: 6 callbacks suppressed
[ 6633.575761] gbr3[31130]: segfault at 0 ip 0000000000408eb4 sp
00007fff87beb380 error 6 in gbx3[400000+3d000]
[ 8662.147100] device eth0 entered promiscuous mode
> Why the fuck are you so obsessed with an operating system you don't use?
Don't use Linux, huh?
> I can think of nothing more pathetic.
I can. You. Now, you were saying, netl0on? Who doesn't use linux? Hmmm?
When you get around to recovering from your self-imposed, fuckwitted
embarrassment, we can discus my contributions to open source over against
yours.
--
A test sig
Gerlach Dampende Pikstok
news:u9ydnSDHsJE7MN_W...@supernews.com:
Well, it can't have been all that lousy. You replied.
And what I said above also happens to be true.
HTH
--
A test sig
Michel van Kanalenveger
news:slrnhk5ehf.p...@ip70-176-155-130.ph.ph.cox.net:
lol - you fucking lying, one-eyed imbecile.
> Why do they lock gas station bathrooms? Are they afraid someone might
> clean them?
That I would believe.
--
A test sig
Mad as a Box of Frogs
Tony <To...@TheDeli.Sandwich> wrote:
>Linux is so bad it should be free. Linux is worse than free you become a test
>tube rat or guinea pig testing some half-witted freeware piece of shit.
IAWTP
>Kadaitcha Man wrote:
><few reaqlly care>
--
Master of Puppets We are all Rich Rosen
DENSA Life Achievement � Am I the only one with half a brain?
Hadron
It's this type of "advocacy" that makes you two so laughable.
Meanwhile millions manage just fine.
Alexis Machine
> It's this type of "advocacy" that makes you two so laughable.
>
> Meanwhile millions manage just fine.
>
Depends on the app being used. If I use Roxio, the burning process has a
noticeable impact on my computer's performance. If I use Ashampoo, everything
is good.
Alexis Machine
> - Sucks ass for desktops.
Wrong, fool.
Chris Ahlstrom
My point is the one I always make -- that I find the Windows environment
confining and, to some extent, weird.
I don't care if millions of people who do lightweight tasks never come up
against the limitations of Windows. *I* come up against them, and find them
irksome, and so I tend to avoid running Windows.
And I'm so comfortable with my scripts that I don't bother mucking about in
Windows to master and burn CDs and DVDs -- I do it in Linux.
It's all about the comfort zone.
--
The notes blatted skyward as they rose over the Canada geese, feathered
rumps mooning the day, webbed appendages frantically pedaling unseen
bicycles in their search for sustenance, driven by cruel Nature's maxim,
'Ya wanna eat, ya gotta work,' and at last I knew Pittsburgh.
-- Winning sentence, 1987 Bulwer-Lytton bad fiction contest.
Sinister Midget III
> Burnt a CD or two in Windows. It felt weird.
I burned a CD in Windross. It made me use a wizard! A fucking /wizard/
to burn one file! Gotta hit "next" and "finish" and other goofy shit,
and that's after telling it I wanted to burn a file to a CD and which
file to burn.
How about this: put in a CD, run a program, choose a file and hit
"burn" to burn it? Why would something like that require a fucking
wizard? Even K3B, which requires an extra step because it pops up a
window to let you play with unnecessary settings (only sometimes needed
on DVD-RW for me), even K3B doesn't use a retardo /wizard/ to burn a
fucking file!!
It's even easier on the commandline. You don't have to screw around
with pointy-clicky restardism there at all. One step. Two if you don't
want to type out a whole path and you cd to where the file is first.
How well does it get done on the Win-DUH!s commandline?
--
Catscan: a hi-tech device for examining cats.
----------------------------------------------------------------
Eee PC900 16G SSD 2G RAM Debian testing
Friends don't let friends use Windows
Hadron
Stop press : it depends on the app.
Alexis Machine
> Stop press : it depends on the app.
Yeah, it does. Why the snide comment? Wait, you're the Quark troll, correct?
I just answered my own question.
hoser1605
> On Mon, 04 Jan 2010 22:03:12 -0600, AZ Nomad
>
> <aznoma...@PremoveOBthisOX.COM> wrote:
> >On Tue, 05 Jan 2010 08:36:45 +0545, Kadaitcha Man <a...@no.email> wrote:
> >>Some jingly toe-jam named descanted:
>
> >>Things are really fucking bad in Linux when you have to boot into fucking
> >>Windows just to burn a DVD.
>
> >>Fucking piece of shit, Linux.
>
> >Burning DVDs in linux is trivial to anybody who isn't a blithering
> >idiot like you.
>
> >Why the fuck are you so obsessed with an operating system you don't use?
> >I can think of nothing more pathetic.
>
> doesn't use the software O/S, yet took the time to post regarding the
> poster whom they know doesn't use the software O/S.
>
> HTH
>
> --
>
> http://i689.photobucket.com/albums/vv251/doctorevans/08-23-09_1934.jpg
>
> http://bayimg.com/NAJNIaAcB
>
> "I can't speak for the rest of Usenet but the reason this newsgroup is a
> mess, is because you and your spouse, along with your co-defendants were
> too stupid to shut your gobs when you knew you were outmatched. And what
> you left behind is litter like Fred Hall, the "magic FNVW" Kebbie
> Carnon, who else? The gash, Roz the Rat, spooge teh Family "law" Guy -
> who would rather trash what's left of AUK than stick to the charter."
> Message-ID: <hhdju2$1jo$1...@undertow.eternal-september.org>
>
> "The "pros" use viewers that dig right down to the serial number,
> where it was purchased and if a credit card was used or a warranty card
> filled out, who purchased it." MID:<heuf5e$qg...@undertow.eternal-september.org>
>
> "The charter cited atftp://ftp.isc.org/pub/usenet/control/altreads:> As per discussion on alt.config alt.usenet.kooks
> > has been created. Usenet has more of its share of
> > conspiracy theorists and kooks and this group has
> > been created for the discussion of these people.
> > Examples of their work will be posted here and it will
> > be a meeting place for kook-hunters to gather and
> > swap stories and keep one another up to date as to
> > where the new budding kooks can be found. It is
> > hoped that through the careful use of the Followup
> > line, kooks can be lured into crossposting to alt.usenet.kooks.
>
> Message-ID: <hhes12$ar...@undertow.eternal-september.org> tommigrlll not realizing the above is not a charter
>
> " You geriatric moron skidmark blight on humanity's sphincter." tommigrlll in Message-ID: <4b3bf...@news.x-privat.org>
>
> "Yes - "Sow" is your permanent name. And what's your point?
> Sell those cars or I will own them." More of tommigrllls impotent threats in Message-ID: <4b3c001...@news.x-privat.org>
Fuck off Fred. Really tired of your idiotic posts
Hadron
The "Quark Troll" eh?
All I can say is thanks for that great piece of technology know how
"It depends on the app"
Earth shatteringly clever of you ....
AZ Nomad
>Some loathly name-dropper named AZ Nomad wrote in
>news:slrnhk5eg0.p...@ip70-176-155-130.ph.ph.cox.net:
>> On Tue, 05 Jan 2010 08:36:45 +0545, Kadaitcha Man <an...@no.email> wrote:
>>>Some jingly toe-jam named descanted:
>>
>>>Things are really fucking bad in Linux when you have to boot into
>>>fucking Windows just to burn a DVD.
>>
>>>Fucking piece of shit, Linux.
>>
>> Burning DVDs in linux is trivial to anybody who isn't a blithering idiot
>> like you.
>Go right ahead and blame anything other than the cleanly-installed piece
>of shit Linux. Of course, clean-installing a different distro fixed it,
>hey.boot@akhenaten:~$ cat/proc/cpuinfo
>bash: cat/proc/cpuinfo: No such file or directory
Again, it's trivial and you're a blithering idiot. You've given no
indication that you would accept help and every bit of evidence that
you'd lash out as you're an asshole too.
spi...@freenet.co.uk
> Rick stated in post u9ydnSDHsJE7MN_W...@supernews.com on 1/4/10
> 8:10 PM:
>
>> .. lousy troll attempt.
>
> Better luck next time! :)
>
>
He's better off sticking with his non-computer related trollery.
Either that or he's just given up and is trolling on autopilot.
--
| spi...@freenet.co.uk | Windows95 (noun): 32 bit extensions and a |
| | graphical shell for a 16 bit patch to an 8 bit |
| Andrew Halliwell BSc | operating system originally coded for a 4 bit |
| in |microprocessor, written by a 2 bit company, that|
| Computer Science | can't stand 1 bit of competition. |
JEDIDIAH
>
>
> Mad as a Box of Frogs wrote:
>
>> In article <4B42ECCC...@TheDeli.Sandwich>,
>> Tony <To...@TheDeli.Sandwich> wrote:
>>>Linux is so bad it should be free. Linux is worse than free you become a
>>>test tube rat or guinea pig testing some half-witted freeware piece of
>>>shit.
>>
>> IAWTP
>>
>>
>>>Kadaitcha Man wrote:
>>><few reaqlly care>
>
>
> - Sucks ass for desktops.
Really think so? Find a better example.
Preferably use an example where Linux hasn't had the advantage for many
years (like burning optical media).
--
|||
In a free market, the herd should be irrelevant. / | \
JEDIDIAH
So Windows is infested with lame crapware?
Thinks for telling us this Hadron.
JEDIDIAH
No. It's a load of total Lemming bullshit.
chuckcar
news:slrnhk6lb...@nomad.mishnet:
The commercial games. That's just about it.
Still the only DOS (suck on *that* kiddies) that can play any movie or
DVD on the command line - and faster than windoze ever did.
--
(setq (chuck nil) car(chuck) )
AZ Nomad
>On 2010-01-05, Hadron <hadro...@gmail.com> wrote:
>>
>>
>> Alexis Machine <n...@email.you.moron> writes:
>>
>>> On 05 Jan 2010, Hadron wrote:
>>>
>>>> It's this type of "advocacy" that makes you two so laughable.
>>>>
>>>> Meanwhile millions manage just fine.
>>>>
>>>
>>> Depends on the app being used. If I use Roxio, the burning process has a
>>> noticeable impact on my computer's performance. If I use Ashampoo, everything
>>> is good.
>>
>> Stop press : it depends on the app.
> So Windows is infested with lame crapware?
> Thinks for telling us this Hadron.
Windows expects the application to make up for all its serious OS
deficiencies. Things have changed that much since DOS required
applications to totally bypass the OS and connect directly to hardware.
One windows app might work ok, but that doesn't mean that all of them
will.
Ezekiel
"Sinister Midget III" <a...@myeeemobile.com> wrote in message
news:bbpb17-...@home.harry.net...
> On 2010-01-05, Chris Ahlstrom <ahls...@launchmodem.com> claimed:
>
>> Burnt a CD or two in Windows. It felt weird.
>
> I burned a CD in Windross. It made me use a wizard! A fucking /wizard/
> to burn one file! Gotta hit "next" and "finish" and other goofy shit,
> and that's after telling it I wanted to burn a file to a CD and which
> file to burn.
>
> How about this: put in a CD, run a program, choose a file and hit
> "burn" to burn it? Why would something like that require a fucking
> wizard? Even K3B, which requires an extra step because it pops up a
> window to let you play with unnecessary settings (only sometimes needed
> on DVD-RW for me), even K3B doesn't use a retardo /wizard/ to burn a
> fucking file!!
>
> It's even easier on the commandline.
Riiiiiight. Because the typical consumer wants to drop down to the CLI and
type:
cdrecord -eject -v speed=2 dev=0,6,0 -data -pad binary-i386-1.iso
That's going to be so much easier for them.
> You don't have to screw around
> with pointy-clicky restardism there at all.
99% of the people in the world would rather point-and-click to burn a CD.
> How well does it get done on the Win-DUH!s commandline?
dvdburn.exe and cdburn.exe - try learning something for a change.
DFS
> One windows app might work ok, but that doesn't mean that all of them
> will.
The Windows apps you make a living with work just fine.
TomB
The ones I use don't. The DNS server in W2003 for example is set up to
forward requests from *anywhere* by default. On top of that it pushes
zone transfers over a high numbered port instead of port 53. Very
broken.
--
καὶ ἵνα μή τις δύνηται ἀγοράσαι ἢ πωλῆσαι εἰ μὴ ὁ ἔχων τὸ χάραγμα, τὸ
ὄνομα τοῦ θηρίου ἢ τὸν ἀριθμὸν τοῦ ὀνόματος αὐτοῦ. Ὧδε ἡ σοφία ἐστίν·
ὁ ἔχων νοῦν ψηφισάτω τὸν ἀριθμὸν τοῦ θηρίου· ἀριθμὸς γὰρ ἀνθρώπου ἐστί·
καὶ ὁ ἀριθμὸς αὐτοῦ χξϛʹ.
AZ Nomad
Office, outlook, and clearquest are serious piles of shit to name just a
few.
Peter Köhlmann
> JEDIDIAH wrote:
>
>>> - Sucks ass for desktops.
>>
>> Really think so? Find a better example.
>>
>> Preferably use an example where Linux hasn't had the advantage for
>> many
>> years (like burning optical media).
>
> There are many many examples. First one that comes to my head is
> CAD/CAM. Linux is a good decade behind.
>
Oh, certainly it is.
Just ignore the many (and often very pricy) CAD/CAM packages available for
linux.
--
Microsoft's Guide To System Design:
If it starts working, we'll fix it. Pronto.
Peter Köhlmann
Actually, no. Piles of shit still can be put to good use.
--
Individualists unite!
AZ Nomad
They actually mostly work, as long as the network connection never
ever has a timeout, and you don't mind waiting ages for the most
trivial of operations.
Microsoft has never understood that WANS aren't instanteous, can
have timeouts and errors, and have security issues.
Rex Ballard
w...@alt.alien.visitors.dried-up.wonga> wrote:
> Some fossilised truck driver named ray wrote innews:7qfoj5...@mid.individual.net:
> > On Tue, 05 Jan 2010 08:36:45 +0545, Kadaitcha Man wrote:
> >> Fucking piece of shit, Linux.
>
Initial
> >> Things are really fucking bad in Linux when you have to boot into
> >> fucking Windows just to burn a DVD.
I assume your are talking about burning a DVD that will play on a
typical DVD player, rather than just data storage.
> > If that were actually true - yes, it would be pretty bad.
How true it is depends on the distribution.
> It is bad. It is also true.
Only partially true. The standards group that established the DVD
format requires that publisher of DVD-CSS decoder software pay a
modest royalty of about 25 cents per user for the intellectual
property rights to decode the software. The decoder is pretty simple,
you get a country key for the country you live in, access a sector on
the DVD which, when combined with the country key, gives you the DES
key to decode the rest of the DVD. It's only a 56 bit DES key, so
it's not hard to figure out what the country key is, but you're not
supposed to do it. Under the United States Digital Millinium
Copyright Act (DMCA) it's illegal to decode copyrighted material
protected in this way without having a license to the decode and
complying with the license.
As a result, many "truly free" distributions, such as Debian, don't
have decoder software. On the other hand, commercially supported
versions of Linux such as SLED and RHED often do offer downloadable
decoders to those who pay the subscription fee for support. This fee
includes a number of other software packages covered by patents and/or
restrictive licenses as well as "binary-only" software. These
packages do include the DVD-CSS decoder.
> --
> A test sig
Marti van Lin
> On Tue, 05 Jan 2010 08:36:45 +0545, Kadaitcha Man wrote:
>
>>
>> fucking Windows just to burn a DVD.
>>
>
*Plonked* for 30 days.
Please don't quote the trolls Ray!
--
|_|0|_| Marti van Lin
|_|_|0| http://sites.google.com/site/ml2mst
|0|0|0| http://osgeex.blogspot.com
JEDIDIAH
Well, if you already have an image ready it's just a right click away
on the desktop in Linux. Did Windows ever manage to implement something
similar?
...and I am talking the "entire experience" here and not just little bits
and pieces that may or may not come in pre-compiled form and may be completely
inexplicable to the common Windows n00b.
>
>
>> How well does it get done on the Win-DUH!s commandline?
>
> dvdburn.exe and cdburn.exe - try learning something for a change.
...so then why do people still have this strange idea that a CD or
DVD image is somehow a bizzare sort of thing that no one has any idea
to deal with?
"`cdburn` is not recognized as an internal or external command,
operable program or batch file."
--
Apple: because TRANS.TBL is an mp3 file. It really is! |||
/ | \
JEDIDIAH
>
>>> - Sucks ass for desktops.
>>
>> Really think so? Find a better example.
>>
>> Preferably use an example where Linux hasn't had the advantage for many
>> years (like burning optical media).
>
> Linux is a good decade behind.
>
That's a PISS POOR example that nearly NO ONE cares about.
Sure, if you a practicing professional engineer it matters. Even then,
the question is more of "cats rule and dogs drool".
I doubt you've ever touched any CAD application before ever in your life
or even been in a place that uses such apps.
Autocad used to have a pretty big general retail presence back in the 80s.
Dave
>
> "`cdburn` is not recognized as an internal or external command,
> operable program or batch file."
>
JEDIDIAH = hopeless idiot
---------------------------------------------------------->
Try the Program Files directory.
Ezekiel
"JEDIDIAH" <je...@nomad.mishnet> wrote in message
news:slrnhk747...@nomad.mishnet...
Figures you don't know. Meanwhile people have been doing this on Windows for
years.
> ...and I am talking the "entire experience" here and not just little
> bits
> and pieces that may or may not come in pre-compiled form and may be
> completely
> inexplicable to the common Windows n00b.
With your rhymes and riddles nobody has any idea what the hell you're
talking about. What "entire experience?"
>>> How well does it get done on the Win-DUH!s commandline?
>>
>> dvdburn.exe and cdburn.exe - try learning something for a change.
>
> ...so then why do people still have this strange idea that a CD or
> DVD image is somehow a bizzare sort of thing that no one has any idea
> to deal with?
Because it's something that very few people (not zero) know how to deal
with.
> "`cdburn` is not recognized as an internal or external command,
> operable program or batch file."
So it's not installed on your computer. Go to Microsoft.com and download it
for free along with various other utilities. It doesn't change the fact that
burning CDs and DVDs from the command line is only relevant to a extremely
small segment of computer users.
7
sock Kadaitcha Man wrote on behalf of Half Wits from Micoshaft Appil
Department of Marketing:
> S
You sound just like Hans van Raaij, the Double Dutch PR evangelist.
Have you tried installing Linux Hans?
Its a lot faster than windopws and cheaper too on netbooks.
Here is a how to to get 3D desktop on a netbook operational:
3D TRANSLUCENT COMPIZ
Using extlinux to convert a liveCD iso to bootable SD card
-------------------------------------------------------------
Converting an ISO file to a bootable USB stick or a bootable
SD Card for EEE is easy.
Without being able to convert a distro into a bootable USB flash /SD Card,
that distro can't be easily loaded into netbook like EEE
and stand to miss out on users installing it into netbooks.
So I would recommend all distro mainters look at their netbook
boot strategy and offer something to boot their distros
from USB flash and SD cards or miss out on users installing it into
netbooks.
Having done a few conversions, a pattern emerges that works well for
most syslinux / isolinux / extlinux based distros.
1. Put your SD card or USB flash drive into your desktop Linux PC and
then open a console and type dmesg
You should see some line indicating your flash drive as
being picked up and allocated with a comment like sdc / sdc1 etc..
Remember both names - the first is /dev/sdc which is your
device name, and the second is /dev/sdc1 which is your partition name.
(Don't get confused between drive /dev/sdc and partition /dev/sdc1
or your drive could become scrambled eggs later on. Also remember
it may be called sdg or sdh etc depending what you see when you
plug in device and type dmesg)
2. Install gparted on your machine using synaptic.
To run it you can type
sudo gparted
in a console window and select on the right side the drive name allocated
in step 1. Right click on the bar that represents the partition
and click on manage flags.
Enable the boot flag and click OK. This makes the SD Card / USB
stick bootable.
3. Format the partition /dev/sdc1 to ext2 linux format.
This format is not directly readable under WINDUMMY Osen, but there
are free drivers for it - try for example www.fs-driver.org
The ext2 format is many times faster than windummy FAT so
ditching WINDUMMY file formats is advised.
4. Identify that you have syslinux or isolinux in your liveCD by
opening the .ISO file in archive manager and checking that it has
isolinux or syslinux directory somewhere in the liveCD.
In ubuntu, the root directory of /dev/sdc1 will not be writeable
unless you are in super user mode.
You can run
sudo file-roller
to open iso files like xubuntu-9.04-desktop-i386.iso in super user
mode and extract all the files in the iso file
to the /dev/sdc1 partition.
5. Go to the flash drive and locate the syslinux (or isolinux) directory.
rename it to extlinux. Inside the now renamed extlinux directory will
a file such as syslinux.cfg or isolinux.cfg. Rename that to
extlinux.conf
6. Get syslinux - this is a boot loader and menu system for FAT based
file systems. Download the latest version from here...
http://www.kernel.org/pub/linux/utils/boot/syslinux/
Unzip it and go to the extlinux directory.
On my machine path is something like this....../syslinux/extlinux
Run the program there by typing this - (note this command is updating
the partition /dev/sdc1)
./extlinux --install /dev/sdc1/extlinux
This puts a new file into your SD card / USB flash disk
7. from the extlinux directory change to the mbr directory
cd ../mbr
and then run this - again note this time its updating the device by
writing data to the first sector as opposed to the first partition.
sudo cat mbr.bin > /dev/sdc
(Note at this stage you may need to do some of the sudo commands after
entering super user mode to make it work properly.
So the above command would have been done as follows in Ubuntu.
sudo -s
cat mbr.bin > /dev/sdc
)
This makes the card bootable and useable in an Asus EEE and many other
PCs with SD card or USB flash disk boot facility.
After booting, you can install Linux on to local disk or an external
pocket drive. The pocket drive can be 7200 RPM giving you near desktop
speed.
This method tested and works for
1. Ubuntu
2. Slax
3. Knoppix
4. Puppy
5. DSL
6. GParted
7. gOS
8. Dynabolic
9. MoonOS Kachana
10. Xubuntu
11. TinyOS (incredible distro!)
(Note the method does not work for .ISO files built with grub bootloader -
need a different install method with grub boot loader instead of syslinux.)
Try installing something powerful like Ubuntu on to a netbook
and see it take netbooks to new heights.
3D Translucent Cube Desktop
---------------------------
The latest EEE1000 has fast enough graphics for translucent
3D desktops. An easy way to do all this with Ubuntu is:
Install Ubuntu on EEE (compiz itself
appears to be installed by default in the default install),
then install compiz settings manager using Synaptic
which allows compiz to be fully 'exercised'.
And then do the following to get the 3D cube desktop
working...
Go to General > Display Settings > Lighting and turned it off
Enable Desktop Cube and then Desktop Cube > Transparent Cube and set the
two opacity settings to 30%
then Desktop Cube > Skydome and check the skydome check mark
Enable Rotate Cube
Enable Enhanced Zoom Desktop
Right click the virtual workspaces panel and increase the number
of colums to 16.
And hey presto - 100% 3D translucent desktop with 16 screens!!!!!!!!!!
[Some shortcuts for the 3D screen
ctrl + alt + left or right arrow to spin cube
ctrl + alt + down arrow and then left or right arrow for a ring switcher
super + E for yet another switcher
super + mouse wheel scroll to zoom in and out of the 3D desktop.
]
You can run many applications simultaneously on netbook like a
real Linux desktop. You can open many browser tabs, run Open Office, video,
and developer stuff like MySQL server, Apache, PHP, Gambas, sqlite3
ALL SIMULTANEOUSLY while on a train for example, and rotate the
cube to switch between tasks instantly. Gone are the days when netbooks
were mis-represented as toys. They are fully functional Linux
Desktops on the move. Try it! It works!
Reducing Font Sizes And Turning ON Sub Pixel Rendering
------------------------------------------------------
The EEE can be astonishingly good to look at once the
font size is reduced to about 8 and sub pixel rendering
is turned ON. It is still absolutely
readable and everything appeared like a 'full screen' miniature
desktop equivalent of a big desktop PC.
System > Appearance > Fonts get to the font settings
in Ubuntu. On software like firefox and some other applications,
need to also to set local use of fonts ( Edit > Preferences > Content
will have font settings for firefox that also need to be changed).
VirtualBox
----------
Yes! VirtualBox can run on Ubutu set up with 3D translucent desktop.
http://www.virtualbox.org
Install virtual box and then install programs like windopws XP and run
it pretty much at it would run on a normal netbook. Its hard to tell
if the netbook is running Linux or the WINDUMMY OSen when the software
is run full screen becaue the speed and responsiveness is about
the same between a real windummy OSen install and a virtual box
virtual machine running it all in Linux.
Speeding up netbook to near Desktop speed
-----------------------------------------
With the EEE, you can speed up the netbook into a desktop PC able to handle
giant applications. Just fit USB 7200 RPM external pocket drive. Install
and boot Linux from the external drive. Data transfer rate is about 28
Megabytes per second so video and other stuff work at near desktop speeds.
Obviously it uses up a lot more energy and 2 USB sockets and so
drains battery very fast. Need to be plugged into a charger to
get best performance. You don't want to fit the 7200RPM drive
inside the netbook - it will heat up a lot. If you want 7 to 8 hours of
battery life from your netbooks you need to limit yourself to slowish SSDs
for now. As the pocket drives cost only 40 pounds, another advantage
is that you can have several to switch between tasks.
If netbooks start shipping with e-Sata, then that would be even better
option to get as the e-Sata and 7200 RPM pocket drives
desktop drive are common and cheap.
http://www.livecdlist.com
http://www.distrowatch.com
Rick
> ray wrote:
>> On Tue, 05 Jan 2010 08:36:45 +0545, Kadaitcha Man wrote:
>>
>>> Some jingly toe-jam named descanted:
>>>
>>> Things are really fucking bad in Linux when you have to boot into
>>> fucking Windows just to burn a DVD.
>>>
>>> Fucking piece of shit, Linux.
>>
>> If that were actually true - yes, it would be pretty bad.
>
> *Plonked* for 30 days.
Oh, oh, oh... to be plonked by Marti... how to deal with the strain ....
>
> Please don't quote the trolls Ray!
So, you don't want people quoting you?
--
Rick
JEDIDIAH
>
>
> JEDIDIAH wrote:
>
>> That's your idea of a "good example"?
>>
>> That's a PISS POOR example that nearly NO ONE cares about.
>
Linux does stuff that normal people care about.
If you would like to address those things, feel free.
Otherwise, your attempts to whine about kilobuck pro apps bore us.
[deletia]
--
In a "stable" but "inconsistent" system, the end user only |||
has to adapt once rather than needing to adapt any time a / | \
new version of the relevant shovelware is released.
JEDIDIAH
Mebbe after they installed some 3rd party commercial software.
...assuming they knew to do that.
>
>
>> ...and I am talking the "entire experience" here and not just little
>> bits
>> and pieces that may or may not come in pre-compiled form and may be
>> completely
>> inexplicable to the common Windows n00b.
>
> With your rhymes and riddles nobody has any idea what the hell you're
> talking about. What "entire experience?"
What "entire experience" are we talking about here.
Don't hurt yourself trying to figure it out Forrest.
>
>
>>>> How well does it get done on the Win-DUH!s commandline?
>>>
>>> dvdburn.exe and cdburn.exe - try learning something for a change.
>>
>> ...so then why do people still have this strange idea that a CD or
>> DVD image is somehow a bizzare sort of thing that no one has any idea
>> to deal with?
>
> Because it's something that very few people (not zero) know how to deal
> with.
Sorry. Wrong answer.
The system should make it un-complicated. That is what all of that
frilly graphical nonsense is there for. Why is this a strange idea for
Lemmings that whine about n00bs and claim to be their champions?
>
>
>
>> "`cdburn` is not recognized as an internal or external command,
>> operable program or batch file."
>
> So it's not installed on your computer. Go to Microsoft.com and download it
> for free along with various other utilities. It doesn't change the fact that
Now how is a n00b supposed to figure that out?
> burning CDs and DVDs from the command line is only relevant to a extremely
> small segment of computer users.
JEDIDIAH
Why? I don't need to do that with Linux or MacOS?
That sounds terribly primitive and why anyone with any clue thinks
that Microsoft anything is total crap.
Ezekiel
"JEDIDIAH" <je...@nomad.mishnet> wrote in message
Anyone who is creating or downloading and burning ISO images is more than
knowledgeable enough to download and install a small free utility.
>>> ...and I am talking the "entire experience" here and not just little
>>> bits
>>> and pieces that may or may not come in pre-compiled form and may be
>>> completely
>>> inexplicable to the common Windows n00b.
>>
>> With your rhymes and riddles nobody has any idea what the hell you're
>> talking about. What "entire experience?"
>
> What "entire experience" are we talking about here.
>
> Don't hurt yourself trying to figure it out Forrest.
Learn how to express yourself correctly and you won't have scores of people
trying to figure out what the hell it is you're saying. It's not my fault
you turn even the simplest of things into rhymes and riddles. Here's someone
else (earlier today) also telling you that you make no sense when you post.
I
http://groups.google.com/group/comp.os.linux.advocacy/msg/9a973604bac32095?hl=en
<quote>
As a side note, your last statement makes absolutely no sense.
</quote>
>>>>> How well does it get done on the Win-DUH!s commandline?
>>>>
>>>> dvdburn.exe and cdburn.exe - try learning something for a change.
>>>
>>> ...so then why do people still have this strange idea that a CD or
>>> DVD image is somehow a bizzare sort of thing that no one has any idea
>>> to deal with?
>>
>> Because it's something that very few people (not zero) know how to deal
>> with.
>
> Sorry. Wrong answer.
It's the right answer. Your failure to comprehend it is your problem. The
fact is that very few computer users know anything about disk layout, file
formats or what an "iso image" is. If you think that the average Joe
Six-pack has any idea of what an ISO file is then it simply shows just how
far out of touch with reality you are.
> The system should make it un-complicated. That is what all of that
> frilly graphical nonsense is there for. Why is this a strange idea for
> Lemmings that whine about n00bs and claim to be their champions?
It's not the burning of an ISO that's complicated for users to grok.
>>> "`cdburn` is not recognized as an internal or external command,
>>> operable program or batch file."
>>
>> So it's not installed on your computer. Go to Microsoft.com and download
>> it
>> for free along with various other utilities. It doesn't change the fact
>> that
>
> Now how is a n00b supposed to figure that out?
Hint for you.... anyone who's going to be burning CDs and DVDs from the CLI
is not a n00b. The built-in graphical wizzards are for the n00bs.
Sinister Midget III
> AZ Nomad wrote:
>> Office, outlook, and clearquest are serious piles of shit to name just a
>> few.
>
> Actually, no. Piles of shit still can be put to good use.
Yes. *MUCH* more useful than that pile mentioned above:
--
Oxymoron: Southern Front.
----------------------------------------------------------------
Eee PC900 16G SSD 2G RAM Debian testing
Friends don't let friends use Windows
Hadron
> On 2010-01-05, sittingduck <du...@spamherelots.com> wrote:
>>
>>
>> JEDIDIAH wrote:
>>
>>> That's your idea of a "good example"?
>>>
>>> That's a PISS POOR example that nearly NO ONE cares about.
>>
>> Kind of like Linux. Not many care about it, either.
>
> Linux does stuff that normal people care about.
What? Like playing modern games, syncing their iPod, updating their
Blackberry SW, that kind of stuff?
Jed. Pull your head out of your crusty arse. For all its benefits, doing
things "normal people want" is not one of them.
JEDIDIAH
>
>
>
> "JEDIDIAH" <je...@nomad.mishnet> wrote in message
> news:slrnhk7cp...@nomad.mishnet...
>> On 2010-01-05, Ezekiel <not-...@the-zeke.com> wrote:
>>>
>>>
>>>
>>> "JEDIDIAH" <je...@nomad.mishnet> wrote in message
>>> news:slrnhk747...@nomad.mishnet...
>>>> On 2010-01-05, Ezekiel <not-...@the-zeke.com> wrote:
>>>>>
>>>>>
>>>>>
>>>>> "Sinister Midget III" <a...@myeeemobile.com> wrote in message
>>>>> news:bbpb17-...@home.harry.net...
>>>>>> On 2010-01-05, Chris Ahlstrom <ahls...@launchmodem.com> claimed:
[deletia]
>>>> Well, if you already have an image ready it's just a right click away
>>>> on the desktop in Linux. Did Windows ever manage to implement something
>>>> similar?
>>>
>>> Figures you don't know. Meanwhile people have been doing this on Windows
>>> for
>>> years.
>>
>> Mebbe after they installed some 3rd party commercial software.
>>
>> ...assuming they knew to do that.
>
> Anyone who is creating or downloading and burning ISO images is more than
> knowledgeable enough to download and install a small free utility.
What knowledge? All it takes to download an ISO is to click on a hyperlink
in some GUI web browser. An ISO is a datafile just like any other datafile. It
is by no means special. It's no more special than a ZIP file or an mp3.
[some of Forrest's nonsense deleted]
>
>>>>>> How well does it get done on the Win-DUH!s commandline?
>>>>>
>>>>> dvdburn.exe and cdburn.exe - try learning something for a change.
>>>>
>>>> ...so then why do people still have this strange idea that a CD or
>>>> DVD image is somehow a bizzare sort of thing that no one has any idea
>>>> to deal with?
>>>
>>> Because it's something that very few people (not zero) know how to deal
>>> with.
>>
>> Sorry. Wrong answer.
>
> It's the right answer. Your failure to comprehend it is your problem. The
> fact is that very few computer users know anything about disk layout, file
> formats or what an "iso image" is. If you think that the average Joe
They don't need to know. That's rather the point. A good UI will
lead them by the nose to the tool they need or just do everything
automagically.
> Six-pack has any idea of what an ISO file is then it simply shows just how
> far out of touch with reality you are.
A good interface doesn't require him to any more than he needs to know
much about a zip file or mp3.
>
>
>> The system should make it un-complicated. That is what all of that
>> frilly graphical nonsense is there for. Why is this a strange idea for
>> Lemmings that whine about n00bs and claim to be their champions?
>
> It's not the burning of an ISO that's complicated for users to grok.
We will remember this the next time you Lemmings try to claim
otherwise.
>
>
>>>> "`cdburn` is not recognized as an internal or external command,
>>>> operable program or batch file."
>>>
>>> So it's not installed on your computer. Go to Microsoft.com and download
>>> it
>>> for free along with various other utilities. It doesn't change the fact
>>> that
>>
>> Now how is a n00b supposed to figure that out?
>
> Hint for you.... anyone who's going to be burning CDs and DVDs from the CLI
> is not a n00b. The built-in graphical wizzards are for the n00bs.
What graphical wizards?
Windows doesn't do anything with an ISO image. It never has.
[deletia]
--
If you think that an 80G disk can hold HUNDRENDS of |||
hours of DV video then you obviously haven't used iMovie either. / | \
JEDIDIAH
>
>
> JEDIDIAH wrote:
>
>> On 2010-01-05, sittingduck <du...@spamherelots.com> wrote:
>>>
>>>
>>> JEDIDIAH wrote:
>>>
>>>> That's your idea of a "good example"?
>>>>
>>>> That's a PISS POOR example that nearly NO ONE cares about.
>>>
>>> Kind of like Linux. Not many care about it, either.
>>
>> Linux does stuff that normal people care about.
>
What? Because my use of the Linux desktop looks more like how other
people would use a Mac rather than some poser loser's ramblings
about software that no one has ever heard about and no one cares
about.
Don't kid yourself.
> Maybe if linux had more than 5% of the user base, it wouldn't suck so bad
> as a desktop OS. Until then, it's just another "hobby" OS.
>
>> If you would like to address those things, feel free.
>>
>> Otherwise, your attempts to whine about kilobuck pro apps bore us.
>>
>> [deletia]
>
> I'll address what I care too, just like you choose to ignore that which you
> can't refute.
WHO CARES
Not anyone in Best Buy.
Not anyone in Frys.
Not anyone in Microcenter.
Not anyone in Target.
Not anyone in Walmart.
Not anyone in the Apple store.
Hadron
Err, yes. Years ago. Are you fucking retarded or what?
>
> ...and I am talking the "entire experience" here and not just little bits
> and pieces that may or may not come in pre-compiled form and may be completely
> inexplicable to the common Windows n00b.
What the hell are you talking about?
>
>>
>>
>>> How well does it get done on the Win-DUH!s commandline?
>>
>> dvdburn.exe and cdburn.exe - try learning something for a change.
>
> ...so then why do people still have this strange idea that a CD or
> DVD image is somehow a bizzare sort of thing that no one has any idea
> to deal with?
People don't. What are you talking about now?
Rockinghorse Winner
>On Tue, 05 Jan 2010 08:36:45 +0545, Kadaitcha Man wrote:
>> Some jingly toe-jam named descanted:
>>
>> Things are really fucking bad in Linux when you have to boot into
>> fucking Windows just to burn a DVD.
>>
>> Fucking piece of shit, Linux.
>.. lousy troll attempt.
>--
>Rick
really lousy...
Ezekiel
"JEDIDIAH" <je...@nomad.mishnet> wrote in message
Which eliminates the CLI tools that your ilk was whining about earlier.
>>> The system should make it un-complicated. That is what all of that
>>> frilly graphical nonsense is there for. Why is this a strange idea for
>>> Lemmings that whine about n00bs and claim to be their champions?
>>
>> It's not the burning of an ISO that's complicated for users to grok.
>
> We will remember this the next time you Lemmings try to claim
> otherwise.
Based on your posts, I doubt you have the capacity to remember much of
anything for more than a few minutes.
>>>>> "`cdburn` is not recognized as an internal or external command,
>>>>> operable program or batch file."
>>>>
>>>> So it's not installed on your computer. Go to Microsoft.com and
>>>> download
>>>> it
>>>> for free along with various other utilities. It doesn't change the fact
>>>> that
>>>
>>> Now how is a n00b supposed to figure that out?
>>
>> Hint for you.... anyone who's going to be burning CDs and DVDs from the
>> CLI
>> is not a n00b. The built-in graphical wizzards are for the n00bs.
>
> What graphical wizards?
>
> Windows doesn't do anything with an ISO image. It never has.
Any other completely clueless statements you'd like to make? Care to change
your mind on this before I once again show you just how stupid you are.
(Hint - learn how to use Google and learn what you're missing. Then try to
remember what you read for more than 10 minutes.)
Rockinghorse Winner
>With the windows, you have the joy of having to stop using the
>computer for anything. Let one of it's heavyweight apps do anything,
>and the disk will be a coaster.
Is this true?? If it is, 'what a piece of...'
Ezekiel
"Rockinghorse Winner" <rwi...@8600.com> wrote in message
news:eKOdnUj-qMG...@giganews.com...
Of course it's not true. This is nonsense from the same type of "advocates"
who claim that Windows can't burn an ISO file, that Vista creates "millions"
of temp files and that Vista needs more memory than a 32-bit CPU can
address. Clueless as ever.
Alexis Machine
> Earth shatteringly clever of you ....
>
You're a stupid little bitch.
Shoo, like the blowfly you are.
Kadaitcha Man
> On Tue, 05 Jan 2010 08:43:22 +0100, Staaf ten Paardekut
> <dowdy.v...@alt.fan.asthma> wrote:
>>Some loathly name-dropper named AZ Nomad wrote in
>>news:slrnhk5eg0.p...@ip70-176-155-130.ph.ph.cox.net:
>
>>> On Tue, 05 Jan 2010 08:36:45 +0545, Kadaitcha Man <an...@no.email>
>>> wrote:
>>>>Some jingly toe-jam named descanted:
>>>
>>>>Things are really fucking bad in Linux when you have to boot into
>>>>fucking Windows just to burn a DVD.
>>>
>>>>Fucking piece of shit, Linux.
>>>
>>> Burning DVDs in linux is trivial to anybody who isn't a blithering
>>> idiot like you.
>
>>Go right ahead and blame anything other than the cleanly-installed piece
>>of shit Linux. Of course, clean-installing a different distro fixed it,
>>hey.boot@akhenaten:~$ cat/proc/cpuinfo bash: cat/proc/cpuinfo: No such
>>file or directory
>
>
> Again, it's trivial and you're a blithering idiot. You've given no
> indication that you would accept help and every bit of evidence that
> you'd lash out
Ok, so fix it for me and the hundreds of other linux users having the
same problem. New installs will not write CDs or DVDs yet Windows has no
trouble.
Here's the background:
http://osdir.com/ml/ubuntu-users/2009-04/msg00239.html
http://ohioloco.ubuntuforums.org/showthread.php?p=8561569
http://www.linuxforums.org/forum/ubuntu-help/138181-cd-dvd-rom-will-not-
burn-cdr.html
http://ubuntuforums.org/showthread.php?t=1158815
http://pastebin.com/pastebin.php?dl=m9650117
https://lists.ubuntu.com/archives/ubuntu-users/2009-April/179336.html
http://www.mail-archive.com/deskto...@lists.ubuntu.com/msg322672.html
https://bugs.launchpad.net/ubuntu/+source/cdrkit/+bug/449960
https://bugs.launchpad.net/ubuntu/+source/brasero/+bug/495487
http://www2b.abc.net.au/science/techtalk/newposts/723/post723469.shtm
http://swiss.ubuntuforums.org/showthread.php?p=8450059
http://www.uluga.ubuntuforums.org/showthread.php?t=1316646
http://www.linux.com/community/forums?func=view&catid=3&id=1655
http://www.linuxforums.org/forum/ubuntu-help/138181-cd-dvd-rom-will-not-
burn-cdr.html
I await your fixing of this trivial problem.
> as you're an asshole too.
Yes.
--
Test signature
Kadaitcha Man
> On Jan 5, 2:34 am, Verbnigge Prettig Gestoorde Vlek <decrepit.ne'er-do-
> w...@alt.alien.visitors.dried-up.wonga> wrote:
>> Some fossilised truck driver named ray wrote
>> innews:7qfoj5...@mid.individual.net:
>> > On Tue, 05 Jan 2010 08:36:45 +0545, Kadaitcha Man wrote:
>
>> >> Fucking piece of shit, Linux.
>>
>>
> Initial
>> >> Things are really fucking bad in Linux when you have to boot into
>> >> fucking Windows just to burn a DVD.
>
> I assume your are talking about burning a DVD that will play on a
> typical DVD player, rather than just data storage.
No.
Considering your going-in assumption is fucked, I assume the rest of the
crap you wrote is also fucked.
Snipped, unread.
--
Test signature
Kadaitcha Man
> To 24hshd only
>
> https://help.ubuntu.com/community/CdDvd/Burning This tutorial covers
> the default burning software provided with Ubuntu as well as command
> line burning. There are also alternative burning programs to consider
> such as xcdroast or k3b.
You perpetual fucking idiot, Easter. The problem occurs on a fresh
install and it also affects k3b, xcdroast and gnomebaker, you fiucking
brain dead gump.
--
Test signature
Peter Köhlmann
Naturally you have problems, Kadaitcha Toddler.
After all, you lack the very first braincell to use anything linux
So you make up your very own "problems" to hide that very fact
--
Microsoft's Guide To System Design:
Let it get in YOUR way. The problem for your problem.
Kadaitcha Man
> Kadaitcha Toddler babbled incoherently:
>
>> Some bald-pated fellator named Mike Easter blew off:
>>
>>> To 24hshd only
>>>
>>> https://help.ubuntu.com/community/CdDvd/Burning This tutorial covers
>>> the default burning software provided with Ubuntu as well as command
>>> line burning. There are also alternative burning programs to consider
>>> such as xcdroast or k3b.
>>
>> You perpetual fucking idiot, Easter. The problem occurs on a fresh
>> install and it also affects k3b, xcdroast and gnomebaker, you fiucking
>> brain dead gump.
>>
>>
> Naturally you have problems, Kadaitcha Toddler.
Projection noted.
> After all, you lack the very first braincell to use anything linux
>
> So you make up your very own "problems" to hide that very fact
Unlike all you linuxfux, at least I solved the problem. It was caused by
the fucking badly-written linux sg driver that doesn't correctly support
modern-day SCSI DVD burners. As always, Linux only supports older
hardware.
Shove that up your cherman arse and smoke it.
boot@akhenaten:~$ wodim dev=/dev/scd0 driveropts=burnfree,noforcespeed
fs=14M speed=24 -dao -eject -v cd_image.iso
[...]
Writing pregap for track 1 at -150
[...]
Fixating...
Fixating time: 8.835s
wodim: fifo had 8346 puts and 8346 gets.
wodim: fifo was 0 times empty and 8115 times full, min fill was 96%.
Meh. Sucks to be you, hey.
--
Test signature
chrisv
>JEDIDIAH wrote:
>>
>> Linux does stuff that normal people care about.
>
>You're a perfect example of why linux doesn't attract "Normal".
>Maybe if linux had more than 5% of the user base, it wouldn't suck so bad
>as a desktop OS. Until then, it's just another "hobby" OS.
"Logic" as bad as this requires to refutation.
*plonk*
chrisv
KF the POS.
chrisv
Should say "no" refutation.
ray
wrote:
> Some fossilised truck driver named ray wrote in
> news:7qfoj5...@mid.individual.net:
>
>> On Tue, 05 Jan 2010 08:36:45 +0545, Kadaitcha Man wrote:
>>
>>> Some jingly toe-jam named descanted:
>>>
>>> Things are really fucking bad in Linux when you have to boot into
>>> fucking Windows just to burn a DVD.
>>>
>>> Fucking piece of shit, Linux.
>>
>> If that were actually true - yes, it would be pretty bad.
>
> It is bad. It is also true.
It's obviously NOT true. "you have to boot into <expletive deleted>
Windows just to burn a DVD". I've done many on Linux systems without
booting to MS - as a matter of fact, I only have one system I think might
be capable of booting to MS - it's been so long, I'm not sure any more.
William Poaster
> sittingduck wrote:
>
>> JEDIDIAH wrote:
>>
>>>> - Sucks ass for desktops.
>>>
>>> Really think so? Find a better example.
>>>
>>> Preferably use an example where Linux hasn't had the advantage for
>>> many
>>> years (like burning optical media).
>>
>> There are many many examples. First one that comes to my head is
>> CAD/CAM. Linux is a good decade behind.
>>
>
> Oh, certainly it is.
> Just ignore the many (and often very pricy) CAD/CAM packages available for
> linux.
"sttingduck" still displaying his total ignorance of Linux, I see. He
used to spout the same shit in another group years ago.
ray
> ray wrote:
>> On Tue, 05 Jan 2010 08:36:45 +0545, Kadaitcha Man wrote:
>>
>>> Some jingly toe-jam named descanted:
>>>
>>> Things are really fucking bad in Linux when you have to boot into
>>> fucking Windows just to burn a DVD.
>>>
>>> Fucking piece of shit, Linux.
>>
>> If that were actually true - yes, it would be pretty bad.
>
> *Plonked* for 30 days.
OMG - I can't stand it - yawn.
>
> Please don't quote the trolls Ray!
Now you're trying to tell me who to reply to and who not. Sorry, I'm
'independently minded'.
William Poaster
> On 2010-01-05, sittingduck <du...@spamherelots.com> wrote:
>>
>>
>> JEDIDIAH wrote:
>>
>>> That's your idea of a "good example"?
>>>
>>> That's a PISS POOR example that nearly NO ONE cares about.
>>
>> Kind of like Linux. Not many care about it, either.
>
> Linux does stuff that normal people care about.
>
> If you would like to address those things, feel free.
>
> Otherwise, your attempts to whine about kilobuck pro apps bore us.
sittingduck's an idiot. He's "argued" unsuccessfully against Linux
before, & just shows his ignorance of the OS.
An Old Friend
I looked through several of the links ... most seem to be just a repeat
of one person's problems. One person did explain why the problem was
happening:
BEGIN QUOTE
You are not using original software but a defective fork that only
occasionally writes DVDs. A well known fact about the fork (wodim)
you are using is that it does not support to write dual layer DVDs at
all because it does not know how to handle the specifics of dual layer
DVDs. This is a result from the fact that the working DVD support from
the original cdrecord has been ripped off and replaced by something
half baken in the fork.
If you replace the broken fork by the original software, see:
ftp://ftp.berlios.de/pub/cdrecord/alpha/
http://cdrecord.berlios.de
http://cdrecord.berlios.de/private/linux-dist.html
you should be able to write this medium in case that your writer
implements support for the specific media you are using.
END QUOTE
chrisv
>On Wed, 06 Jan 2010 15:58:26 +0545, Kadaitcha Man wrote:
*plonk*
Van Chocstraw
> Some jingly toe-jam named descanted:
>
> Things are really fucking bad in Linux when you have to boot into fucking
> Windows just to burn a DVD.
>
> Fucking piece of shit, Linux.
>
Only for you. The rest of us use K3b or Nautilus or command line burning.
DFS
Meanwhile, hypocrite Marti is nymshifting as ChiTown and replying to me and
everyone else.
Marti van Lin
> On Tue, 05 Jan 2010 20:50:35 +0100, Marti van Lin wrote:
>
>> ray wrote:
>>> On Tue, 05 Jan 2010 08:36:45 +0545, Kadaitcha Man wrote:
>>>
>>>> Some jingly toe-jam named descanted:
>>>>
>>>> Things are really fucking bad in Linux when you have to boot into
>>>> fucking Windows just to burn a DVD.
>>>>
>>>> Fucking piece of shit, Linux.
>>> If that were actually true - yes, it would be pretty bad.
>> *Plonked* for 30 days.
>
> OMG - I can't stand it - yawn.
LOL, I doubt it, all are unplonked by now ;-)
>
>> Please don't quote the trolls Ray!
>
> Now you're trying to tell me who to reply to and who not. Sorry, I'm
> 'independently minded'.
Nope, only trying to reduce the troll's noise...
--
|_|0|_| Marti van Lin
|_|_|0| http://sites.google.com/site/ml2mst
|0|0|0| http://osgeex.blogspot.com
Arend van der Berigheid
news:xa711k$vu2$n...@theatrical-piece-of-ass.net.japan...
> Some woebegone giblet named Peter Köhlmann rapped:
always!
PIK's (Peter Idiot K�hlmanns) "classic" cockups:
<quote>
Peter K�hlmann wrote "quatsch" in COLA: "Linux is perfect at everything";
Peter K�hlmann: "It is"
http://groups.google.com/group/comp.os.linux.advocacy/msg/f31c2035e5494b57?dmode=source&output=gplain
Peter K�hlmann lied in COLA "I program Windows systems yes. But I am not a
Windows user." Peter K�hlmann, COLA.
http://groups.google.com/group/comp.os.linux.advocacy/msg/aa52a85a3acc798a?dmode=source
Question in cola: > You're back!
Quoting PIK (Peter Idiot Kohlmann): "Not really. I am no longer interested
in cola, as it has degenerated into a cesspit full of the worst filth
imaginable."
< Of course, the liar Peter K�hlmann kept spewing his rants into this NG, he
called a "degenerated cesspit". >
Peter K�hlmann piffled in COLA:"Visio is available only seperately and not
included in any MS Office package"
http://office.microsoft.com/nl-nl/getstarted/FX101055081043.aspx
Peter K�hlmann fiddle-faddled in COLA : The apps with "Quit" do not exit,
they continue to run in the background
<BWAHAHAHAHAHAHAAAAAH!!>
Peter K�hlmann wrote balderdash in COLA: I don't care what that guy has to
say. Anyone chosing Gnome as DE is already disqualified. Gnome is hideous,
technically (for programmers) and optically
< Linus Torvalds: I thought KDE 4.0 was such a disaster, I switched to
GNOME.>
Snit: Doing a quick search on the web I find this:
http://www.cann.ca/apa-template.doc
Peter K�hlmann: Naturally you fail to provide the URL, as usual
Peter K�hlmann bullshitted in COLA "it's okay to dereference a NULL pointer"
"an attempt to dereference a null pointer usually causes a run-time error"
http://en.wikipedia.org/wiki/Pointer_(computing)
Peter K�hlmann waffled in COLA: "Hulu Desktop is not Hulu"
http://www.hulu.com/labs/hulu-desktop
post: h065qd$jfe$02$1...@news.t-online.com
< lol >
Peter K�hlmann blabbed in COLA: "Three hours is actually a short time for a
windows install"
Ad Hominem: BWAHAHAHAHAHAHAHAAAAH!, you stupid tit!
http://www.google.nl/search?source=ig&hl=nl&rlz=&q=Windows+7+install+takes+15+minutes&btnG=Google+zoeken&meta=lr%3D&aq=f&oq=
Peter K�hlmann's gobshitter in COLA: There is *no* single user linux system.
They are *all* multiuser.
Ezekiel: Puppy Linux is a single user distro. All your denial won't change
this.
[ "Puppy is a single user operating system so you are running as root all
the time." ]
http://www.penguinway.net/?p=89
Peter K�hlmann's wrote stupidity in COLA:
About FINALE music technology software: John Fuhrer: "Next he'll (kohlmann)
be telling people that Finale can't do music composition. Oh wait... he did
that too."
Peter K�hlmann: "Well, it can't"
See how Kohlmann gets his a$$ kicked seriously.
http://groups.google.com/group/comp.os.linux.advocacy/browse_thread/thread/f8541219be92f15f
Other amazing Peter Kohlman claims:
* A swap partition is more efficient than a contiguous swap file on
Linux. (The kernel tracks swap space by contiguous regions of disk. It
doesn't care if they come from a file or a dedicated partition.).
* A screen shot of an antialiased image will not show the antialiasing.
(Trivially disproved by experiment).
* MD5 collisions are not a security risk.
* 64-bit pointers do not take up more memory than 32-bit pointers.
* KDE apps will not work on Cygwin.
* Posting your WPA key to a public forum is not a security risk for your
wireless network.
* Peter claimed that the answer given by Excel for multiplying 29513736
by 92842033 shows Excel is slop ware. Unfortunately, Peter didn't
bother to check with any other spreadsheets, as all versions of
OpenOffice *agree* with Excel. Peter was too dumb to realize that many
spreadsheets give results to a set number of significant figures.
* If X makes a statement, for example "the sky is blue", and Y says that
X is wrong, that does NOT mean that Y disagrees with the statement "the
sky is blue" or agrees with the statement "the sky is not blue".
* LCD displays cannot look good at anything other than their native
resolution.
Sarah Ehrett
My husband looks like a Weeble(tm)!
http://img682.imageshack.us/i/ehrettweeble.jpg/
OK, figure out: Which is Kenneth Ehrett, and which is the Hasbro Weeble
(tm)?!
----------------------------------------------------
.sig:
Defendant Name: EHRETT, KENNETH ANDREW
Court System: DISTRICT COURT FOR CHARLES COUNTY - CRIMINAL
SYSTEM
Case Number: 00008221P3Tracking No:0000008221P3
Case Type: CRIMINAL
District Code: 04Location Code:02
Document Type: STATEMENT OF CHARGESIssued Date:12/17/1989
Case Status: CLOSEDCase Disposition:TRIAL
Defendant Information
Defendant Name: EHRETT, KENNETH ANDREW
Race: WHITE, CAUCASIAN, ASIATIC INDIAN, ARAB
Sex: MHeight:509Weight:215DOB:11/18/1956
Address: 110 BEACH DRIVE
City: MECHANICSVILLEState:MDZip Code:20659 - 0000
Charge and Disposition Information
(Each Charge is listed separately. The disposition is listed below
the
Charge)
Charge No: 001Description:HANDGUN ON PERSON: CARRY/WEAR
Statute: 27.36B.(b)Description:HANDGUN ON PERSON
Amended Date: CJIS Code:1 5212MO/PLL:Probable Cause:
Incident Date From: To: Victim Age:
Disposition
Plea: GUILTY
Snit
201001061808...@smtp.cobalt.loc on 1/6/10 11:08 AM:
> "Kadaitcha Man" <an...@no.email> schreef in bericht
> news:xa711k$vu2$n...@theatrical-piece-of-ass.net.japan...
>> Some woebegone giblet named Peter K枚hlmann rapped:
> PIK's (Peter Idiot K锟絟lmanns) "classic" cockups:
> <quote>
> Peter K锟絟lmann wrote "quatsch" in COLA: "Linux is perfect at everything";
> Peter K锟絟lmann: "It is"
> http://groups.google.com/group/comp.os.linux.advocacy/msg/f31c2035e5494b57?dmo
> de=source&output=gplain
>
> Peter K锟絟lmann lied in COLA "I program Windows systems yes. But I am not a
> Windows user." Peter K锟絟lmann, COLA.
> http://groups.google.com/group/comp.os.linux.advocacy/msg/aa52a85a3acc798a?dmo
> de=source
>
> Question in cola: > You're back!
> Quoting PIK (Peter Idiot Kohlmann): "Not really. I am no longer interested
> in cola, as it has degenerated into a cesspit full of the worst filth
> imaginable."
> < Of course, the liar Peter K锟絟lmann kept spewing his rants into this NG, he
> called a "degenerated cesspit". >
>
> Peter K锟絟lmann piffled in COLA:"Visio is available only seperately and not
> included in any MS Office package"
> http://office.microsoft.com/nl-nl/getstarted/FX101055081043.aspx
>
> Peter K锟絟lmann fiddle-faddled in COLA : The apps with "Quit" do not exit,
> they continue to run in the background
> <BWAHAHAHAHAHAHAAAAAH!!>
>
> Peter K锟絟lmann wrote balderdash in COLA: I don't care what that guy has to
> say. Anyone chosing Gnome as DE is already disqualified. Gnome is hideous,
> technically (for programmers) and optically
> < Linus Torvalds: I thought KDE 4.0 was such a disaster, I switched to
> GNOME.>
>
> Snit: Doing a quick search on the web I find this:
> http://www.cann.ca/apa-template.doc
> Peter K锟絟lmann: Naturally you fail to provide the URL, as usual
>
> Peter K锟絟lmann bullshitted in COLA "it's okay to dereference a NULL pointer"
> "an attempt to dereference a null pointer usually causes a run-time error"
> http://en.wikipedia.org/wiki/Pointer_(computing)
>
> Peter K锟絟lmann waffled in COLA: "Hulu Desktop is not Hulu"
> http://www.hulu.com/labs/hulu-desktop
> post: h065qd$jfe$02$1...@news.t-online.com
> < lol >
>
> Peter K锟絟lmann blabbed in COLA: "Three hours is actually a short time for a
> windows install"
> Ad Hominem: BWAHAHAHAHAHAHAHAAAAH!, you stupid tit!
> http://www.google.nl/search?source=ig&hl=nl&rlz=&q=Windows+7+install+takes+15+
> minutes&btnG=Google+zoeken&meta=lr%3D&aq=f&oq=
>
> Peter K锟絟lmann's gobshitter in COLA: There is *no* single user linux system.
> They are *all* multiuser.
> Ezekiel: Puppy Linux is a single user distro. All your denial won't change
> this.
> [ "Puppy is a single user operating system so you are running as root all
> the time." ]
> http://www.penguinway.net/?p=89
>
> Peter K锟絟lmann's wrote stupidity in COLA:
> About FINALE music technology software: John Fuhrer: "Next he'll (kohlmann)
> be telling people that Finale can't do music composition. Oh wait... he did
> that too."
> Peter K锟絟lmann: "Well, it can't"
> See how Kohlmann gets his a$$ kicked seriously.
> http://groups.google.com/group/comp.os.linux.advocacy/browse_thread/thread/f85
> 41219be92f15f
>
> Other amazing Peter Kohlman claims:
>
> * A swap partition is more efficient than a contiguous swap file on
> Linux. (The kernel tracks swap space by contiguous regions of disk. It
> doesn't care if they come from a file or a dedicated partition.).
>
> * A screen shot of an antialiased image will not show the antialiasing.
> (Trivially disproved by experiment).
>
> * MD5 collisions are not a security risk.
>
> * 64-bit pointers do not take up more memory than 32-bit pointers.
>
> * KDE apps will not work on Cygwin.
>
> * Posting your WPA key to a public forum is not a security risk for your
> wireless network.
>
> * Peter claimed that the answer given by Excel for multiplying 29513736
> by 92842033 shows Excel is slop ware. Unfortunately, Peter didn't
> bother to check with any other spreadsheets, as all versions of
> OpenOffice *agree* with Excel. Peter was too dumb to realize that many
> spreadsheets give results to a set number of significant figures.
>
> * If X makes a statement, for example "the sky is blue", and Y says that
> X is wrong, that does NOT mean that Y disagrees with the statement "the
> sky is blue" or agrees with the statement "the sky is not blue".
>
> * LCD displays cannot look good at anything other than their native
> resolution.
>
And Peter has the audacity to put down those who he has proved himself such
a fool. Amazing.
--
[INSERT .SIG HERE]
Hadron
> Arend van der Berigheid stated in post
> 201001061808...@smtp.cobalt.loc on 1/6/10 11:08 AM:
>
>> "Kadaitcha Man" <an...@no.email> schreef in bericht
>> news:xa711k$vu2$n...@theatrical-piece-of-ass.net.japan...
>>> Some woebegone giblet named Peter Köhlmann rapped:
>> PIK's (Peter Idiot Köhlmanns) "classic" cockups:
>> <quote>
>> Peter Köhlmann wrote "quatsch" in COLA: "Linux is perfect at everything";
>> Peter Köhlmann: "It is"
>> http://groups.google.com/group/comp.os.linux.advocacy/msg/f31c2035e5494b57?dmo
>> de=source&output=gplain
>>
>> Peter Köhlmann lied in COLA "I program Windows systems yes. But I am not a
>> Windows user." Peter Köhlmann, COLA.
>> http://groups.google.com/group/comp.os.linux.advocacy/msg/aa52a85a3acc798a?dmo
>> de=source
>>
>> Question in cola: > You're back!
>> Quoting PIK (Peter Idiot Kohlmann): "Not really. I am no longer interested
>> in cola, as it has degenerated into a cesspit full of the worst filth
>> imaginable."
>> < Of course, the liar Peter Köhlmann kept spewing his rants into this NG, he
>> called a "degenerated cesspit". >
>>
>> Peter Köhlmann piffled in COLA:"Visio is available only seperately and not
>> included in any MS Office package"
>> http://office.microsoft.com/nl-nl/getstarted/FX101055081043.aspx
>>
>> Peter Köhlmann fiddle-faddled in COLA : The apps with "Quit" do not exit,
>> they continue to run in the background
>> <BWAHAHAHAHAHAHAAAAAH!!>
>>
>> Peter Köhlmann wrote balderdash in COLA: I don't care what that guy has to
>> say. Anyone chosing Gnome as DE is already disqualified. Gnome is hideous,
>> technically (for programmers) and optically
>> < Linus Torvalds: I thought KDE 4.0 was such a disaster, I switched to
>> GNOME.>
>>
>> Snit: Doing a quick search on the web I find this:
>> http://www.cann.ca/apa-template.doc
>> Peter Köhlmann: Naturally you fail to provide the URL, as usual
>>
>> Peter Köhlmann bullshitted in COLA "it's okay to dereference a NULL pointer"
>> "an attempt to dereference a null pointer usually causes a run-time error"
>> http://en.wikipedia.org/wiki/Pointer_(computing)
>>
>> Peter Köhlmann waffled in COLA: "Hulu Desktop is not Hulu"
>> http://www.hulu.com/labs/hulu-desktop
>> post: h065qd$jfe$02$1...@news.t-online.com
>> < lol >
>>
>> Peter Köhlmann blabbed in COLA: "Three hours is actually a short time for a
>> windows install"
>> Ad Hominem: BWAHAHAHAHAHAHAHAAAAH!, you stupid tit!
>> http://www.google.nl/search?source=ig&hl=nl&rlz=&q=Windows+7+install+takes+15+
>> minutes&btnG=Google+zoeken&meta=lr%3D&aq=f&oq=
>>
>> Peter Köhlmann's gobshitter in COLA: There is *no* single user linux system.
>> They are *all* multiuser.
>> Ezekiel: Puppy Linux is a single user distro. All your denial won't change
>> this.
>> [ "Puppy is a single user operating system so you are running as root all
>> the time." ]
>> http://www.penguinway.net/?p=89
>>
>> Peter Köhlmann's wrote stupidity in COLA:
>> About FINALE music technology software: John Fuhrer: "Next he'll (kohlmann)
>> be telling people that Finale can't do music composition. Oh wait... he did
>> that too."
>> Peter Köhlmann: "Well, it can't"
Amazing isn't it?
Poor Peter. I pity him almost as much as I pity his little hanger on and
worshipper Miniwitz who claimed Peter in fact "correct" saying its ok to
dereference a null pointer in C - only a day after proclaiming himself
and Peter world class C maestros who "craft" code! ROTFLM That one still
tickles me.
Snit
1:23 PM:
>> And Peter has the audacity to put down those who he has proved himself such
>> a fool. Amazing.
>
> Amazing isn't it?
>
> Poor Peter. I pity him almost as much as I pity his little hanger on and
> worshipper Miniwitz who claimed Peter in fact "correct" saying its ok to
> dereference a null pointer in C - only a day after proclaiming himself
> and Peter world class C maestros who "craft" code! ROTFLM That one still
> tickles me.
The fact Peter makes so many errors is not really a big deal - the fact he
does so while claiming to have expertise *and* while making vague
unsupported references to others' errors and "lies" shows he is very
insecure.
--
[INSERT .SIG HERE]
Kadaitcha Man
Gawd. If you got any dumber you'd be a vegetable. Not one single burning
app will work if the sg driver is fucked, hey.
--
Test signature
Kadaitcha Man
> *plonk*
*plonk*
--
Test signature
Kadaitcha Man
> On 2010-01-05, Ezekiel <not-...@the-zeke.com> wrote:
>> Hint for you.... anyone who's going to be burning CDs and DVDs from the
>> CLI is not a n00b. The built-in graphical wizzards are for the n00bs.
>
> What graphical wizards?
>
> Windows doesn't do anything with an ISO image. It never has.
BWAHAHAHAHAHAHAHAHAHAHAHAHA! You dumbfuck retard.
--
Test signature
Kadaitcha Man
> AZ Nomad wrote:
>> Office, outlook, and clearquest are serious piles of shit to name just
>> a few.
>
> Actually, no. Piles of shit still can be put to good use.
Only a German could say such a thing and genuinely mean it.
--
Test signature
Kadaitcha Man
> On Tue, 05 Jan 2010 08:34:41 +0100, Verbnigge Prettig Gestoorde Vlek
> wrote:
>
>> Some fossilised truck driver named ray wrote in
>> news:7qfoj5...@mid.individual.net:
>>
>>> On Tue, 05 Jan 2010 08:36:45 +0545, Kadaitcha Man wrote:
>>>
>>>> Some jingly toe-jam named descanted:
>>>>
>>>> Things are really fucking bad in Linux when you have to boot into
>>>> fucking Windows just to burn a DVD.
>>>>
>>>> Fucking piece of shit, Linux.
>>>
>>> If that were actually true - yes, it would be pretty bad.
>>
>> It is bad. It is also true.
>
> It's obviously NOT true.
It is provably true.
> "you have to boot into <expletive deleted>
> Windows just to burn a DVD". I've done many on Linux systems without
> booting to MS
On old hardware.
> - as a matter of fact, I only have one system I think
> might be capable of booting to MS - it's been so long, I'm not sure any
> more.
If it weren't for the warm, squishy feeling between your buttocks you'd
forget where your arse was.
--
Test signature
Peter Köhlmann
Well, there certainly are Piles of Shit which are just industrial waste.
You, for example, are no good for anything. You are just a waste of
otherwise perfectly fine atoms
--
I refuse to have a battle of wits with an unarmed person.
JEDIDIAH
...which is true regardless of OS. So what's your point exactly?
--
"Microsoft looks at new ideas, they don't evaluate whether
the idea will move the industry forward, they ask, |||
'how will it help us sell more copies of Windows?'" / | \
-- Bill Gates
JEDIDIAH
>
>
Calling me stupid names won't change things.
The next time someone brings up the issue of burning a Linux image
in some future thread this will become an intolerable burden again.