Thank you from a now desperate undergrad,
Adam Senalik
Dear Adam,
Don't know if the alloy will be there, but you might try Metal Suppliers
Online at:
http://www.suppliersonline.com
If the alloy isn't listed, try searching for a Producer of a close grade
and contact the producer directly and speak to one of their
metallurgists.
Hope this helps.
> Subject: Obscure Metal
>
> I am searching for the material properties of the aluminum alloy A5182.
> It is apparently not a standard alloy as there is no record of it in any
> of the ASTM texts here on campus (UIUC). IF anyone knows the material
> properties of this alloy can you please write to
> csen...@ux4.cso.uiuc.edu. Also, if the reference material where the
> properties may be found is known, will you please include that
> reference.
>
> Thank you from a now desperate undergrad,
>
> Adam Senalik
>
>
Adam,
You have experience with this alloy. It is used in soda can lids. The
deeply drawn bodies are 3004. It is a wrought alloy, 4.5% MG with yield
strengths as high as 57 ksi in the H19?? condition. Also as low as 19ksi
in the 0 condition. The 0 condition is used for beverage cans.
Not quite so exotic, huh?
Hope this helps,
Seth Allen