It's a shame really. The TX4 is excellent, except it won't work on PCI 66Mhz
with any AMD MP chipset. You'd think Promise would support it. :|
Anyways... question answered ;)
"MrCyberdude" <Mr2files@AT@Hotmail.Com> wrote in message
news:2v0e9.21037$Dr5....@news-server.bigpond.net.au...
D 6268 PDC20268R FastTrak100 TX2/TX4/LP EIDE Controller
"MrCyberdude" <Mr2files@AT@Hotmail.Com> wrote in message news:2v0e9.21037$Dr5....@news-server.bigpond.net.au...
> onboard raid chip disabled.?
>
>
Do I read that as that the TX4 card is actually 2 complete TX2s on one card?
Including the bootroms?
> Had to reverted back to to their original firmware.
>
> It's a shame really. The TX4 is excellent, except it won't work on PCI 66Mhz
> with any AMD MP chipset. You'd think Promise would support it. :|
>
> Anyways... question answered ;)
Hmm, did you use the Flash utility that comes with the TX4 update(s)?
Or is this question born out of a lack of such update(s)?
>
> "MrCyberdude" <Mr2files@AT@Hotmail.Com> wrote in message news:2v0e9.21037$Dr5....@news-server.bigpond.net.au...
> > Can the Promise FastTrak100 TX4
> > be upgraded with the TX2 Bios Upgrade?
> > .
> > Has any one got winxp installed with a TX4
> > on an abit TH7ii-Raid motherboard with the
> > onboard raid chip disabled.?
> >
> >
>
>
If it has 2 bootroms then the TX2 Flash utility must be able to
flash individual cards without the need for removal of other cards.
If it can't do that then it can't be used to flash the TX4.