# WEEWX CONFIGURATION FILE # # Copyright (c) 2009-2022 Tom Keffer # See the file LICENSE.txt for your rights. ############################################################################## # This section is for general configuration information. # Set to 1 for extra debug info, otherwise comment it out or set to zero debug = 0 # Root directory of the weewx data file hierarchy for this station WEEWX_ROOT = /home/weewx # Whether to log successful operations. May get overridden below. log_success = True # Whether to log unsuccessful operations. May get overridden below. log_failure = True # Do not modify this. It is used when installing and updating weewx. version = 4.10.1 # Whether to try indefinitely to load the driver loop_on_init = 1 ############################################################################## # This section is for information about the station. [Station] # Description of the station location location = "XXXX" # Latitude in decimal degrees. Negative for southern hemisphere latitude = XXXXX # Longitude in decimal degrees. Negative for western hemisphere. longitude = XXXXX # Altitude of the station, with the unit it is in. This is used only # if the hardware cannot supply a value. altitude = 100, meter # Choose 'foot' or 'meter' for unit # Set to type of station hardware. There must be a corresponding stanza # in this file, which includes a value for the 'driver' option. station_type = GW1000 # If you have a website, you may specify an URL. This is required if you # intend to register your station. #station_url = http://www.example.com # The start of the rain year (1=January; 10=October, etc.). This is # downloaded from the station if the hardware supports it. rain_year_start = 1 # Start of week (0=Monday, 6=Sunday) week_start = 6 ############################################################################## [GW1000] # This section is for the Ecowitt Gateway driver. # How often to poll the API, default is every 20 seconds: poll_interval = 20 # The driver to use: driver = user.gw1000 ip_address = 192.168.178.37 port = 45000 debug_rain = 2 ############################################################################## # This section is for uploading data to Internet sites [StdRESTful] # Uncomment and change to override logging for uploading services. # log_success = True # log_failure = True [[StationRegistry]] # To register this weather station with weewx, set this to true, # then fill out option 'station_url', located in the [Station] section above. register_this_station = false [[AWEKAS]] # This section is for configuring posts to AWEKAS. # If you wish to post to AWEKAS, set the option 'enable' to true, then specify a username # and password. To guard against parsing errors, put the password in quotes. enable = false username = replace_me password = replace_me [[CWOP]] # This section is for configuring posts to CWOP. # If you wish to post to CWOP, set the option 'enable' to true, # then specify the station ID (e.g., CW1234). enable = false station = replace_me # If this is an APRS (radio amateur) station, specify the # passcode (e.g., 12345). Otherwise, ignore. passcode = replace_me [[PWSweather]] # This section is for configuring posts to PWSweather.com. # If you wish to post to PWSweather.com, set the option 'enable' to true, then specify a # station and password. To guard against parsing errors, put the password in quotes. enable = false station = replace_me password = replace_me [[WOW]] # This section is for configuring posts to WOW. # If you wish to post to WOW, set the option 'enable' to true, then specify a station and # password. To guard against parsing errors, put the password in quotes. enable = false station = replace_me password = replace_me [[Wunderground]] # This section is for configuring posts to the Weather Underground. # If you wish to post to the Weather Underground, set the option 'enable' to true, then # specify a station (e.g., 'KORHOODR3') and password. To guard against parsing errors, put # the password in quotes. enable = false station = replace_me password = replace_me # If you plan on using wunderfixer, set the following # to your API key: api_key = replace_me # Set the following to True to have weewx use the WU "Rapidfire" # protocol. Not all hardware can support it. See the User's Guide. rapidfire = False ############################################################################## # This section specifies what reports, using which skins, to generate. [StdReport] # Where the skins reside, relative to WEEWX_ROOT SKIN_ROOT = skins # Where the generated reports should go, relative to WEEWX_ROOT HTML_ROOT = public_html/ # Uncomment and change to override logging for reports # log_success = True # log_failure = True # The database binding indicates which data should be used in reports. data_binding = wx_binding # Each of the following subsections defines a report that will be run. # See the customizing guide to change the units, plot types and line # colors, modify the fonts, display additional sensor data, and other # customizations. Many of those changes can be made here by overriding # parameters, or by modifying templates within the skin itself. [[SeasonsReport]] # The SeasonsReport uses the 'Seasons' skin, which contains the # images, templates and plots for the report. skin = Seasons enable = false [[SmartphoneReport]] # The SmartphoneReport uses the 'Smartphone' skin, and the images and # files are placed in a dedicated subdirectory. skin = Smartphone enable = true HTML_ROOT = public_html/smartphone [[MobileReport]] # The MobileReport uses the 'Mobile' skin, and the images and files # are placed in a dedicated subdirectory. skin = Mobile enable = false HTML_ROOT = public_html/mobile [[StandardReport]] # This is the old "Standard" skin. By default, it is not enabled. # skin = Standard # enable = false [[Belchertown]] skin = Belchertown HTML_ROOT = public_html/ [[FTP]] # FTP'ing the results to a webserver is treated as just another report, # albeit one with an unusual report generator! skin = Ftp # If you wish to use FTP, set "enable" to "true", then # fill out the next four lines. # Use quotes around passwords to guard against parsing errors. enable = false user = replace_me password = replace_me server = replace_me # The ftp server name, e.g, www.myserver.org path = replace_me # The destination directory, e.g., /weather # Set to True for an FTP over TLS (FTPS) connection. Not all servers # support this. secure_ftp = False # To upload files from something other than what HTML_ROOT is set # to above, specify a different HTML_ROOT here. #HTML_ROOT = public_html # Most FTP servers use port 21 port = 21 # Set to 1 to use passive mode, zero for active mode passive = 1 [[RSYNC]] # rsync'ing to a webserver is treated as just another report skin = Rsync # If you wish to use rsync, you must configure passwordless ssh using # public/private key authentication from the user account that weewx # runs to the user account on the remote machine where the files # will be copied. # # If you wish to use rsync, set "enable" to "true", then # fill out server, user, and path. # The server should appear in your .ssh/config file. # The user is the username used in the identity file. # The path is the destination directory, such as /var/www/html/weather. # Be sure that the user has write permissions on the destination! enable = false server = replace_me user = replace_me path = replace_me # To upload files from something other than what HTML_ROOT is set # to above, specify a different HTML_ROOT here. #HTML_ROOT = public_html # Rsync can be configured to remove files from the remote server if # they don't exist under HTML_ROOT locally. USE WITH CAUTION: if you # make a mistake in the remote path, you could could unintentionally # cause unrelated files to be deleted. Set to 1 to enable remote file # deletion, zero to allow files to accumulate remotely. delete = 0 # Options in the [[Defaults]] section below will apply to all reports. # What follows are a few of the more popular options you may want to # uncomment, then change. [[Defaults]] # Which language to use for all reports. Not all skins support all languages. # You can override this for individual reports. lang = de # Which unit system to use for all reports. Choices are 'us', 'metric', or 'metricwx'. # You can override this for individual reports. unit_system = metricwx [[[Units]]] # Option "unit_system" above sets the general unit system, but overriding specific unit # groups is possible. These are popular choices. Uncomment and set as appropriate. # NB: The unit is always in the singular. I.e., 'mile_per_hour', # NOT 'miles_per_hour' [[[[Groups]]]] # group_altitude = meter # Options are 'foot' or 'meter' # group_pressure = mbar # Options are 'inHg', 'mmHg', 'mbar', or 'hPa' # group_rain = mm # Options are 'inch', 'cm', or 'mm' # group_rainrate = mm_per_hour # Options are 'inch_per_hour', 'cm_per_hour', or 'mm_per_hour' # group_temperature = degree_C # Options are 'degree_C', 'degree_F', or 'degree_K' # The following line is used to keep the above lines indented properly. # It can be ignored. unused = unused # Uncommenting the following section frequently results in more # attractive formatting of times and dates, but may not work in # your locale. [[[[TimeFormats]]]] # day = %H:%M # week = %H:%M on %A # month = %d-%b-%Y %H:%M # year = %d-%b-%Y %H:%M # rainyear = %d-%b-%Y %H:%M # current = %d-%b-%Y %H:%M # ephem_day = %H:%M # ephem_year = %d-%b-%Y %H:%M # The following line is used to keep the above lines indented properly. # It can be ignored. unused = unused [[[Labels]]] # Users frequently change the labels for these observation types [[[[Generic]]]] # inHumidity = Inside Humidity # inTemp = Inside Temperature # outHumidity = Outside Humidity # outTemp = Outside Temperature # extraTemp1 = Temperature1 # extraTemp2 = Temperature2 # extraTemp3 = Temperature3 # The following line is used to keep the above lines indented properly. # It can be ignored. unused = unused ############################################################################## # This service acts as a filter, converting the unit system coming from # the hardware to a unit system in the database. [StdConvert] # The target_unit affects only the unit system in the database. Once # chosen it cannot be changed without converting the entire database. # Modification of target_unit after starting weewx will result in # corrupt data - the database will contain a mix of US and METRIC data. # # The value of target_unit does not affect the unit system for # reporting - reports can display US, Metric, or any combination of units. # # In most cases, target_unit should be left as the default: US # # In particular, those migrating from a standard wview installation # should use US since that is what the wview database contains. # DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING! target_unit = US # Options are 'US', 'METRICWX', or 'METRIC' ############################################################################## # This section can adjust data using calibration expressions. [StdCalibrate] [[Corrections]] # For each type, an arbitrary calibration expression can be given. # It should be in the units defined in the StdConvert section. # Example: foo = foo + 0.2 ############################################################################## # This section is for quality control checks. If units are not specified, # values must be in the units defined in the StdConvert section. [StdQC] [[MinMax]] barometer = 26, 32.5, inHg pressure = 24, 34.5, inHg outTemp = -40, 120, degree_F inTemp = 10, 120, degree_F outHumidity = 0, 100 inHumidity = 0, 100 windSpeed = 0, 120, mile_per_hour rain = 0, 10, inch ############################################################################## # This section controls the origin of derived values. [StdWXCalculate] [[Calculations]] # How to calculate derived quantities. Possible values are: # hardware - use the value provided by hardware # software - use the value calculated by weewx # prefer_hardware - use value provide by hardware if available, # otherwise use value calculated by weewx pressure = prefer_hardware altimeter = prefer_hardware appTemp = prefer_hardware barometer = prefer_hardware cloudbase = prefer_hardware dewpoint = prefer_hardware ET = prefer_hardware heatindex = prefer_hardware humidex = prefer_hardware inDewpoint = prefer_hardware maxSolarRad = prefer_hardware rainRate = prefer_hardware windchill = prefer_hardware windrun = prefer_hardware ############################################################################## # For hardware that supports it, this section controls how often the # onboard clock gets updated. [StdTimeSynch] # How often to check the weather station clock for drift (in seconds) clock_check = 14400 # How much it can drift before we will correct it (in seconds) max_drift = 5 ############################################################################## # This section is for configuring the archive service. [StdArchive] # If the station hardware supports data logging then the archive interval # will be downloaded from the station. Otherwise, specify it (in seconds). archive_interval = 300 # If possible, new archive records are downloaded from the station # hardware. If the hardware does not support this, then new archive # records will be generated in software. # Set the following to "software" to force software record generation. record_generation = software # Whether to include LOOP data in hi/low statistics loop_hilo = True # Uncomment and change to override logging for archive operations # log_success = True # log_failure = True # The data binding used to save archive records data_binding = wx_binding ############################################################################## # This section binds a data store to a database. [DataBindings] [[wx_binding]] # The database must match one of the sections in [Databases]. # This is likely to be the only option you would want to change. database = archive_sqlite # The name of the table within the database table_name = archive # The manager handles aggregation of data for historical summaries manager = weewx.manager.DaySummaryManager # The schema defines the structure of the database. # It is *only* used when the database is created. schema = schemas.wview_extended.schema ############################################################################## # This section defines various databases. [Databases] # A SQLite database is simply a single file [[archive_sqlite]] database_name = weewx.sdb database_type = SQLite # MySQL [[archive_mysql]] database_name = weewx database_type = MySQL ############################################################################## # This section defines defaults for the different types of databases. [DatabaseTypes] # Defaults for SQLite databases [[SQLite]] driver = weedb.sqlite # Directory in which the database files are located SQLITE_ROOT = %(WEEWX_ROOT)s/archive # Defaults for MySQL databases [[MySQL]] driver = weedb.mysql # The host where the database is located host = localhost # The user name for logging in to the host user = weewx # The password (use quotes to guard against parsing errors) password = weewx ############################################################################## # This section configures the internal weewx engine. [Engine] # The following section specifies which services should be run and in what order. [[Services]] prep_services = weewx.engine.StdTimeSynch data_services = user.gw1000.GatewayService process_services = weewx.engine.StdConvert, weewx.engine.StdCalibrate, weewx.engine.StdQC, weewx.wxservices.StdWXCalculate xtype_services = weewx.wxxtypes.StdWXXTypes, weewx.wxxtypes.StdPressureCooker, weewx.wxxtypes.StdRainRater, weewx.wxxtypes.StdDelta archive_services = weewx.engine.StdArchive restful_services = weewx.restx.StdStationRegistry, weewx.restx.StdWunderground, weewx.restx.StdPWSweather, weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS report_services = weewx.engine.StdPrint, weewx.engine.StdReport [Accumulator] # Start Ecowitt Gateway driver extractors [[daymaxwind]] extractor = last [[lightning_distance]] extractor = last [[lightning_strike_count]] extractor = sum [[lightningcount]] extractor = last [[lightning_last_det_time]] extractor = last [[stormRain]] extractor = last [[hourRain]] extractor = last [[dayRain]] extractor = last [[weekRain]] extractor = last [[monthRain]] extractor = last [[yearRain]] extractor = last [[totalRain]] extractor = last [[p_rain]] extractor = sum [[p_stormRain]] extractor = last [[p_dayRain]] extractor = last [[p_weekRain]] extractor = last [[p_monthRain]] extractor = last [[p_yearRain]] extractor = last [[t_rain]] extractor = sum [[t_stormRain]] extractor = last [[t_dayRain]] extractor = last [[t_weekRain]] extractor = last [[_monthRain]] extractor = last [[t_yearRain]] extractor = last [[pm2_51_24h_avg]] extractor = last [[pm2_52_24h_avg]] extractor = last [[pm2_53_24h_avg]] extractor = last [[pm2_54_24h_avg]] extractor = last [[pm2_55_24h_avg]] extractor = last [[pm10_24h_avg]] extractor = last [[co2_24h_avg]] extractor = last [[wh40_batt]] extractor = last [[wh26_batt]] extractor = last [[wh25_batt]] extractor = last [[wh24_batt]] extractor = last [[wh65_batt]] extractor = last [[wh31_ch1_batt]] extractor = last [[wh31_ch2_batt]] extractor = last [[wh31_ch3_batt]] extractor = last [[wh31_ch4_batt]] extractor = last [[wh31_ch5_batt]] extractor = last [[wh31_ch6_batt]] extractor = last [[wh31_ch7_batt]] extractor = last [[wh31_ch8_batt]] extractor = last [[wn34_ch1_batt]] extractor = last [[wn34_ch2_batt]] extractor = last [[wn34_ch3_batt]] extractor = last [[wn34_ch4_batt]] extractor = last [[wn34_ch5_batt]] extractor = last [[wn34_ch6_batt]] extractor = last [[wn34_ch7_batt]] extractor = last [[wn34_ch8_batt]] extractor = last [[wn35_ch1_batt]] extractor = last [[wn35_ch2_batt]] extractor = last [[wn35_ch3_batt]] extractor = last [[wn35_ch4_batt]] extractor = last [[wn35_ch5_batt]] extractor = last [[wn35_ch6_batt]] extractor = last [[wn35_ch7_batt]] extractor = last [[wn35_ch8_batt]] extractor = last [[wh41_ch1_batt]] extractor = last [[wh41_ch2_batt]] extractor = last [[wh41_ch3_batt]] extractor = last [[wh41_ch4_batt]] extractor = last [[wh45_batt]] extractor = last [[wh51_ch1_batt]] extractor = last [[wh51_ch2_batt]] extractor = last [[wh51_ch3_batt]] extractor = last [[wh51_ch4_batt]] extractor = last [[wh51_ch5_batt]] extractor = last [[wh51_ch6_batt]] extractor = last [[wh51_ch7_batt]] extractor = last [[wh51_ch8_batt]] extractor = last [[wh51_ch9_batt]] extractor = last [[wh51_ch10_batt]] extractor = last [[wh51_ch11_batt]] extractor = last [[wh51_ch12_batt]] extractor = last [[wh51_ch13_batt]] extractor = last [[wh51_ch14_batt]] extractor = last [[wh51_ch15_batt]] extractor = last [[wh51_ch16_batt]] extractor = last [[wh55_ch1_batt]] extractor = last [[wh55_ch2_batt]] extractor = last [[wh55_ch3_batt]] extractor = last [[wh55_ch4_batt]] extractor = last [[wh57_batt]] extractor = last [[wh68_batt]] extractor = last [[ws80_batt]] extractor = last [[ws90_batt]] extractor = last [[wh40_sig]] extractor = last [[wh26_sig]] extractor = last [[wh25_sig]] extractor = last [[wh24_sig]] extractor = last [[wh65_sig]] extractor = last [[wh31_ch1_sig]] extractor = last [[wh31_ch2_sig]] extractor = last [[wh31_ch3_sig]] extractor = last [[wh31_ch4_sig]] extractor = last [[wh31_ch5_sig]] extractor = last [[wh31_ch6_sig]] extractor = last [[wh31_ch7_sig]] extractor = last [[wh31_ch8_sig]] extractor = last [[wn34_ch1_sig]] extractor = last [[wn34_ch2_sig]] extractor = last [[wn34_ch3_sig]] extractor = last [[wn34_ch4_sig]] extractor = last [[wn34_ch5_sig]] extractor = last [[wn34_ch6_sig]] extractor = last [[wn34_ch7_sig]] extractor = last [[wn34_ch8_sig]] extractor = last [[wn35_ch1_sig]] extractor = last [[wn35_ch2_sig]] extractor = last [[wn35_ch3_sig]] extractor = last [[wn35_ch4_sig]] extractor = last [[wn35_ch5_sig]] extractor = last [[wn35_ch6_sig]] extractor = last [[wn35_ch7_sig]] extractor = last [[wn35_ch8_sig]] extractor = last [[wh41_ch1_sig]] extractor = last [[wh41_ch2_sig]] extractor = last [[wh41_ch3_sig]] extractor = last [[wh41_ch4_sig]] extractor = last [[wh45_sig]] extractor = last [[wh51_ch1_sig]] extractor = last [[wh51_ch2_sig]] extractor = last [[wh51_ch3_sig]] extractor = last [[wh51_ch4_sig]] extractor = last [[wh51_ch5_sig]] extractor = last [[wh51_ch6_sig]] extractor = last [[wh51_ch7_sig]] extractor = last [[wh51_ch8_sig]] extractor = last [[wh51_ch9_sig]] extractor = last [[wh51_ch10_sig]] extractor = last [[wh51_ch11_sig]] extractor = last [[wh51_ch12_sig]] extractor = last [[wh51_ch13_sig]] extractor = last [[wh51_ch14_sig]] extractor = last [[wh51_ch15_sig]] extractor = last [[wh51_ch16_sig]] extractor = last [[wh55_ch1_sig]] extractor = last [[wh55_ch2_sig]] extractor = last [[wh55_ch3_sig]] extractor = last [[wh55_ch4_sig]] extractor = last [[wh57_sig]] extractor = last [[wh68_sig]] extractor = last [[ws80_sig]] extractor = last [[ws90_sig]] extractor = last