[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.0.35-wand5 (jheath@CDA403) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #10 SMP PREEMPT Wed Jul 10 11:32:45 PDT 2013
[    0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d
[    0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: Wandboard
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] CPU identified as i.MX6Q, silicon rev 1.2
[    0.000000] On node 0 totalpages: 479232
[    0.000000] free_area_init_node: node 0, pgdat c07b0b60, node_mem_map d0000000
[    0.000000]   DMA zone: 368 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 46736 pages, LIFO batch:15
[    0.000000]   Normal zone: 976 pages used for memmap
[    0.000000]   Normal zone: 78896 pages, LIFO batch:15
[    0.000000]   HighMem zone: 2752 pages used for memmap
[    0.000000]   HighMem zone: 349504 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 7 pages/cpu @d100e000 s6784 r8192 d13696 u32768
[    0.000000] pcpu-alloc: s6784 r8192 d13696 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 475136
[    0.000000] Kernel command line: console=ttymxc0,115200 root=/dev/sda2 rw rootfstype=ext4 rootwait video=mxcfb0:dev=hdmi,1440x900M@60,if=RGB32
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] allocated 8388608 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Memory: 80MB 1792MB = 1872MB total
[    0.000000] Memory: 1883460k/1883460k available, 213692k reserved, 1409024K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     DMA     : 0xf4600000 - 0xffe00000   ( 184 MB)
[    0.000000]     vmalloc : 0xea800000 - 0xf2000000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xea000000   ( 672 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .init : 0xc0008000 - 0xc003e000   ( 216 kB)
[    0.000000]       .text : 0xc003e000 - 0xc0769000   (7340 kB)
[    0.000000]       .data : 0xc076a000 - 0xc07b3118   ( 293 kB)
[    0.000000]        .bss : 0xc07b313c - 0xc081d538   ( 425 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Verbose stalled-CPUs detection is disabled.
[    0.000000] NR_IRQS:496
[    0.000000] MXC GPIO hardware
[    0.000000] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 1431655ms
[    0.000000] arm_max_freq=1GHz
[    0.000000] MXC_Early serial console at MMIO 0x2020000 (options '115200')
[    0.000000] bootconsole [ttymxc0] enabled
[    0.000000] Console: colour dummy device 80x30
[    0.238169] Calibrating delay loop... 1581.05 BogoMIPS (lpj=7905280)
[    0.326256] pid_max: default: 32768 minimum: 301
[    0.331250] Mount-cache hash table entries: 512
[    0.336713] Initializing cgroup subsys cpuacct
[    0.341230] Initializing cgroup subsys memory
[    0.345639] Initializing cgroup subsys devices
[    0.350147] Initializing cgroup subsys freezer
[    0.354735] CPU: Testing write buffer coherency: ok
[    0.359999] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.460688] CPU1: Booted secondary processor
[    0.540695] CPU2: Booted secondary processor
[    0.620676] CPU3: Booted secondary processor
[    0.660069] Brought up 4 CPUs
[    0.675911] SMP: Total of 4 processors activated (6324.22 BogoMIPS).
[    0.683322] devtmpfs: initialized
[    0.719509] print_constraints: dummy: 
[    0.723864] NET: Registered protocol family 16
[    0.730265] print_constraints: vddpu: 725 <--> 1300 mV at 1150 mV fast normal 
[    0.737743] print_constraints: vddcore: 725 <--> 1300 mV at 1150 mV fast normal 
[    0.745454] print_constraints: vddsoc: 725 <--> 1300 mV at 1200 mV fast normal 
[    0.753072] print_constraints: vdd2p5: 2000 <--> 2775 mV at 2400 mV fast normal 
[    0.760775] print_constraints: vdd1p1: 800 <--> 1400 mV at 1100 mV fast normal 
[    0.768355] print_constraints: vdd3p0: 2625 <--> 3400 mV at 3000 mV fast normal 
[    0.852119] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
[    0.858939] hw-breakpoint: 1 breakpoint(s) reserved for watchpoint single-step.
[    0.866325] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.872247] L310 cache controller enabled
[    0.876284] l2x0: 16 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x02070000, Cache size: 1048576 B
[    0.893871] bio: create slab <bio-0> at 0
[    0.898931] print_constraints: VDDA: 2500 mV 
[    0.903542] print_constraints: VDDIO: 3300 mV 
[    0.908280] vgaarb: loaded
[    0.911948] SCSI subsystem initialized
[    0.915792] libata version 3.00 loaded.
[    0.916144] spi_imx imx6q-ecspi.0: probed
[    0.920444] spi_imx imx6q-ecspi.1: probed
[    0.924809] usbcore: registered new interface driver usbfs
[    0.930422] usbcore: registered new interface driver hub
[    0.935884] usbcore: registered new device driver usb
[    0.960069] imx-ipuv3 imx-ipuv3.0: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
[    0.968190] Advanced Linux Sound Architecture Driver Version 1.0.24.
[    0.975316] Switching to clocksource mxc_timer1
[    1.014176] NET: Registered protocol family 2
[    1.019170] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
[    1.028300] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    1.036619] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[    1.044655] TCP: Hash tables configured (established 65536 bind 65536)
[    1.051228] TCP reno registered
[    1.054394] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    1.060286] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    1.067480] NET: Registered protocol family 1
[    1.072887] RPC: Registered named UNIX socket transport module.
[    1.078832] RPC: Registered udp transport module.
[    1.083594] RPC: Registered tcp transport module.
[    1.088319] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.094806] PCI: CLS 0 bytes, default 32
[    1.095181] _regulator_get: etb supply vcore not found, using dummy regulator
[    1.102743] _regulator_get: etm.0 supply vcore not found, using dummy regulator
[    1.110215] _regulator_get: etm.1 supply vcore not found, using dummy regulator
[    1.117644] _regulator_get: etm.2 supply vcore not found, using dummy regulator
[    1.125122] _regulator_get: etm.3 supply vcore not found, using dummy regulator
[    1.132717] Static Power Management for Freescale i.MX6
[    1.137964] wait mode is disabled for i.MX6
[    1.142317] cpaddr = ea880000 suspend_iram_base=ea874000
[    1.147738] PM driver module loaded
[    1.873292] link up failed, DB_R0:0x00145900, DB_R1:0x08200000!
[    1.879235] IMX PCIe port: link down with power supply 0!
[    1.884922] IMX usb wakeup probe
[    1.888295] the wakeup pdata is 0xe9deeb20
[    1.888559] IMX usb wakeup probe
[    1.891963] the wakeup pdata is 0xe9dee9a0
[    1.892213] cpu regulator init ldo=0
[    1.896009] i.MXC CPU frequency driver
[    1.900617] audit: initializing netlink socket (disabled)
[    1.906063] type=2000 audit(1.650:1): initialized
[    2.017718] highmem bounce pool size: 64 pages
[    2.022577] ashmem: initialized
[    2.026750] VFS: Disk quotas dquot_6.5.2
[    2.031064] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    2.040534] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    2.047372] fuse init (API version 7.16)
[    2.052658] Btrfs loaded
[    2.055219] msgmni has been set to 926
[    2.059642] cryptomgr_test used greatest stack depth: 6908 bytes left
[    2.066121] cryptomgr_test used greatest stack depth: 6768 bytes left
[    2.072951] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    2.080391] io scheduler noop registered
[    2.084330] io scheduler deadline registered
[    2.088823] io scheduler cfq registered (default)
[    2.093984] HDMI I2C CLIENT ASSIGNED
[    2.098220] mxc_sdc_fb mxc_sdc_fb.0: register mxc display driver hdmi
[    2.104740] mxc_hdmi mxc_hdmi: Detected HDMI controller 0x13:0xa:0xa0:0xc1
[    2.111674] fbcvt: 1440x900@60: CVT Name - 1.296MA
[    2.128735] imx-ipuv3 imx-ipuv3.0: WARNING: adapt panel end blank lines
[    2.140028] imx-ipuv3 imx-ipuv3.0: IPU DMFC DP HIGH RESOLUTION: 1(0,1), 5B(2~5), 5F(6,7)
[    2.173385] imx-ipuv3 imx-ipuv3.0: WARNING: adapt panel end blank lines
[    2.208106] Console: switching to colour frame buffer device 160x64
[    2.256635] mxc_sdc_fb mxc_sdc_fb.1: register mxc display driver ldb
[    2.263105] _regulator_get: get() with no identifier
[    2.269963] mxc_edid_readblk - call i2c_transfer
[    2.281918] imx-sdma imx-sdma: loaded firmware 1.1
[    2.289317] imx-sdma imx-sdma: initialized
[    2.293714] Serial: IMX driver
[    2.296879] imx-uart.0: ttymxc0 at MMIO 0x2020000 (irq = 58) is a IMX
[    2.303383] console [ttymxc0] enabled, bootconsole disabled
[    2.314763] imx-uart.2: ttymxc2 at MMIO 0x21ec000 (irq = 60) is a IMX
[    2.321792] [drm] Initialized drm 1.1.0 20060810
[    2.326903] [drm] Initialized vivante 1.0.0 20120216 on minor 0
[    2.333447] ahci: SSS flag set, parallel bus scan disabled
[    2.338964] ahci ahci.0: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode
[    2.346909] ahci ahci.0: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst 
[    2.356164] scsi0 : ahci_platform
[    2.359943] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02200fff] port 0x100 irq 71
[    2.367982] FEC Ethernet Driver
[    2.371864] kworker/u:1 used greatest stack depth: 6344 bytes left
[    2.378175] fec_enet_mii_bus: probed
[    2.383211] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.389883] add wake up source irq 72
[    2.393674] fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller
[    2.400583] fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number 1
[    2.429944] fsl-ehci fsl-ehci.1: irq 72, io base 0x02184200
[    2.449928] fsl-ehci fsl-ehci.1: USB 2.0 started, EHCI 1.00
[    2.456112] hub 1-0:1.0: USB hub found
[    2.459883] hub 1-0:1.0: 1 port detected
[    2.464087] add wake up source irq 75
[    2.470815] fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller
[    2.477623] fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 2
[    2.509936] fsl-ehci fsl-ehci.0: irq 75, io base 0x02184000
[    2.529923] fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00
[    2.535983] hub 2-0:1.0: USB hub found
[    2.539749] hub 2-0:1.0: 1 port detected
[    2.543960] Initializing USB Mass Storage driver...
[    2.548939] usbcore: registered new interface driver usb-storage
[    2.554966] USB Mass Storage support registered.
[    2.559692] ARC USBOTG Device Controller driver (1 August 2005)
[    2.565752] udc: request mem region for fsl-usb2-udc failed 
[    2.571442] fsl-usb2-udc: probe of fsl-usb2-udc failed with error -16
[    2.578086] mousedev: PS/2 mouse device common for all mice
[    2.583948] i2c /dev entries driver
[    2.587826] Linux video capture interface: v2.00
[    2.592703] mxc_v4l2_output mxc_v4l2_output.0: V4L2 device registered as video16
[    2.600237] mxc_v4l2_output mxc_v4l2_output.0: V4L2 device registered as video17
[    2.607778] mxc_v4l2_output mxc_v4l2_output.0: V4L2 device registered as video18
[    2.615669] cpuidle: using governor ladder
[    2.619773] cpuidle: using governor menu
[    2.623762] sdhci: Secure Digital Host Controller Interface driver
[    2.629960] sdhci: Copyright(c) Pierre Ossman
[    2.634476] _regulator_get: sdhci-esdhc-imx.2 supply vmmc not found, using dummy regulator
[    2.643033] mmc0: SDHCI controller on platform [sdhci-esdhc-imx.2] using DMA
[    2.651186] _regulator_get: sdhci-esdhc-imx.1 supply vmmc not found, using dummy regulator
[    2.661766] mmc1: SDHCI controller on platform [sdhci-esdhc-imx.1] using DMA
[    2.668881] sdhci sdhci-esdhc-imx.0: no write-protect pin available!
[    2.675297] _regulator_get: sdhci-esdhc-imx.0 supply vmmc not found, using dummy regulator
[    2.683796] mmc2: SDHCI controller on platform [sdhci-esdhc-imx.0] using DMA
[    2.691039] mxc_vdoa mxc_vdoa: i.MX Video Data Order Adapter(VDOA) driver probed
[    2.700810] VPU initialized
[    2.704363] mxc_asrc registered
[    2.722618] Thermal calibration data is 0x57c4f269
[    2.727423] Thermal sensor with ratio = 181
[    2.749925] Anatop Thermal registered as thermal_zone0
[    2.755216] anatop_thermal_probe: default cooling device is cpufreq!
[    2.761859] usbcore: registered new interface driver usbhid
[    2.767437] usbhid: USB HID core driver
[    2.771293] zram: num_devices not specified. Using default: 1
[    2.777045] zram: Creating 1 devices ...
[    2.779919] mxc_edid_readblk - i2c_transfer returned -110
[    2.779928] unable to read EDID block(-110, 2)
[    2.779935] mxc_edid_read blknum -5
[    2.779947] mxc_hdmi mxc_hdmi: Read EDID again
[    2.779955] mxc_edid_readblk - call i2c_transfer
[    2.803392] usb 1-1: new high speed USB device number 2 using fsl-ehci
[    2.806160] mmc0: new high speed SDHC card at address aaaa
[    2.806647] mmcblk0: mmc0:aaaa SU16G 14.8 GiB 
[    2.807981]  mmcblk0: p1 p2
[    2.823735] mxc_hdmi_soc mxc_hdmi_soc.0: MXC HDMI Audio
[    2.829060] mxc_spdif mxc_spdif.0: MXC SPDIF Audio
[    2.835836] _regulator_get: 1-000a supply VDDD not found, using dummy regulator
[    2.843541] sgtl5000 1-000a: sgtl5000 revision 17
[    2.848369] print_constraints: 1-000a: 850 <--> 1600 mV at 1200 mV normal 
[    2.884534] asoc: sgtl5000 <-> imx-ssi.1 mapping ok
[    2.891371] asoc: mxc-spdif <-> imx-spdif-dai.0 mapping ok
[    2.898457] asoc: mxc-hdmi-soc <-> imx-hdmi-soc-dai.0 mapping ok
[    2.905199] ALSA device list:
[    2.908165] mmc1: queuing unknown CIS tuple 0x80 (50 bytes)
[    2.909953] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.916942] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[    2.919033] mmc1: queuing unknown CIS tuple 0x80 (4 bytes)
[    2.921597] ata1.00: ATA-8: SanDisk SDSSDX120GG25, R112, max UDMA/133
[    2.921611] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    2.931559] ata1.00: configured for UDMA/133
[    2.932003] scsi 0:0:0:0: Direct-Access     ATA      SanDisk SDSSDX12 R112 PQ: 0 ANSI: 5
[    2.932632] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.933040] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[    2.933458] sd 0:0:0:0: [sda] Write Protect is off
[    2.933473] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.933598] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.935014]  sda: sda1 sda2 sda3
[    2.948974] mmc1: queuing unknown CIS tuple 0x02 (1 bytes)
[    2.961319] mmc1: new SDIO card at address 0001
[    2.996392]   #0: sgtl5000-audio
[    2.999651]   #1: imx-spdif
[    3.002484]   #2: imx-hdmi-soc
[    3.007858] TCP cubic registered
[    3.019595] NET: Registered protocol family 10
[    3.026556] hub 1-1:1.0: USB hub found
[    3.030456] hub 1-1:1.0: 7 ports detected
[    3.039374] NET: Registered protocol family 17
[    3.044126] Registering the dns_resolver key type
[    3.049814] VFP support v0.3: 
[    3.052526] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.057548] implementor 41 architecture 3 part 30 variant 9 rev 4
[    3.063697] ThumbEE CPU extension supported.
[    3.068012] Registering SWP/SWPB emulation handler
[    3.073364] Bus freq driver module loaded
[    3.077386] Bus freq driver Enabled
[    3.080958] mxc_dvfs_core_probe
[    3.084206] DVFS driver module loaded
[    3.088306] registered taskstats version 1
[    3.092550] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    3.113764] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    3.121481] VFS: Mounted root (ext4 filesystem) on device 8:2.
[    3.129989] devtmpfs: mounted
[    3.133038] Freeing init memory: 216K
[    3.280992] hostname used greatest stack depth: 4868 bytes left
[    3.289994] mxc_edid_readblk - i2c_transfer returned -110
[    3.290093] unable to read EDID block(-110, 2)
[    3.290157] mxc_edid_read blknum -5
[    3.290213] mxc_hdmi mxc_hdmi: No modes read from edid
[    3.290281] mxc_hdmi mxc_hdmi: create default modelist
[    3.290399] fbcvt: 1440x900@60: CVT Name - 1.296MA
[    3.336975] hwclock used greatest stack depth: 4620 bytes left
[    3.346762] status used greatest stack depth: 4420 bytes left
[    3.350114] usb 1-1.3: new full speed USB device number 3 using fsl-ehci
[    3.415004] init: ureadahead main process (71) terminated with status 5
[    3.420404] imx-ipuv3 imx-ipuv3.0: WARNING: adapt panel end blank lines
[    3.466441] hub 1-1.3:1.0: USB hub found
[    3.468665] hub 1-1.3:1.0: 3 ports detected
[    3.560161] usb 1-1.4: new low speed USB device number 4 using fsl-ehci
[    3.687236] input: USB Optical Mouse as /devices/platform/fsl-ehci.1/usb1/1-1/1-1.4/1-1.4:1.0/input/input0
[    3.697542] generic-usb 0003:045E:0797.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-fsl-ehci.1-1.4/input0
[    3.790340] usb 1-1.3.1: new full speed USB device number 5 using fsl-ehci
[    3.915305] input: Silitek Gateway Generic USB Hub as /devices/platform/fsl-ehci.1/usb1/1-1/1-1.3/1-1.3.1/1-1.3.1:1.0/input/input1
[    3.928945] generic-usb 0003:0443:002E.0002: input,hidraw1: USB HID v1.10 Keyboard [Silitek Gateway Generic USB Hub] on usb-fsl-ehci.1-1.3.1/input0
[    3.950131] input: Silitek Gateway Generic USB Hub as /devices/platform/fsl-ehci.1/usb1/1-1/1-1.3/1-1.3.1/1-1.3.1:1.1/input/input2
[    3.963033] generic-usb 0003:0443:002E.0003: input,hidraw2: USB HID v1.10 Device [Silitek Gateway Generic USB Hub] on usb-fsl-ehci.1-1.3.1/input1
[    4.081550] udevd[162]: starting version 175
[    4.342983] udevd[192]: renamed network interface eth0 to eth2
[    4.648690] cfg80211: Calling CRDA to update world regulatory domain
[    4.754275] Bluetooth: Core ver 2.16
[    4.754461] NET: Registered protocol family 31
[    4.754476] Bluetooth: HCI device and connection manager initialized
[    4.754497] Bluetooth: HCI socket layer initialized
[    4.754516] Bluetooth: L2CAP socket layer initialized
[    4.754578] Bluetooth: SCO socket layer initialized
[    4.757592] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
[    5.255453] udevd[191]: renamed network interface wlan0 to wlan2
[    5.754110] EXT2-fs (mmcblk0p1): warning: mounting unchecked fs, running e2fsck is recommended
[    5.893858] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    6.014763] init: failsafe main process (418) killed by TERM signal
[    6.400284] Bluetooth: RFCOMM TTY layer initialized
[    6.400325] Bluetooth: RFCOMM socket layer initialized
[    6.400343] Bluetooth: RFCOMM ver 1.11
[    6.425342] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    6.425358] Bluetooth: BNEP filters: protocol multicast
[    6.648083] init: alsa-restore main process (515) terminated with status 99
[    7.120477] eth2: Freescale FEC PHY driver [Generic PHY] (mii_bus:phy_addr=1:01, irq=-1)
[    7.124142] ADDRCONF(NETDEV_UP): eth2: link is not ready
[    7.245053] Adding 204796k swap on /dev/zram0.  Priority:10 extents:1 across:204796k SS
[    7.355691] init: plymouth-stop pre-start process (661) terminated with status 1
[    7.419445] init: tty1 main process (664) killed by TERM signal
[    7.706918] imx-ipuv3 imx-ipuv3.0: WARNING: adapt panel end blank lines
[    7.945789] Adding 15504380k swap on /dev/mmcblk0p2.  Priority:-1 extents:1 across:15504380k SS
[   10.132842] PHY: 1:01 - Link is Up - 100/Full
[   10.133351] ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
[   10.970368] warning: process `colord' used the deprecated sysctl system call with 8.1.2.
[   11.597212] Bluetooth: HCI UART driver ver 2.2
[   11.597226] Bluetooth: HCI H4 protocol initialized
[   11.597235] Bluetooth: HCI BCSP protocol initialized
[   11.597244] Bluetooth: HCILL protocol initialized
[   11.597252] Bluetooth: HCIATH3K protocol initialized
[   12.630073] asoc: platform imx-pcm-audio.2 hw params failed
[   12.856012] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[   21.019947] eth2: no IPv6 routers present
[   22.759940] wlan2: no IPv6 routers present