[ 0.000000] Linux version 3.0.8+ (reilienchen@szmce14) (gcc version 4.5.2 (Sourcery G++ Lite 2011.03-41) ) #1 Wed Aug 1 18:40:11 HKT 2012 [ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: WMT [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] On node 0 totalpages: 114688 [ 0.000000] free_area_init_node: node 0, pgdat c077fd40, node_mem_map c087b000 [ 0.000000] Normal zone: 896 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 113792 pages, LIFO batch:31 [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113792 [ 0.000000] Kernel command line: mem=448M root=/dev/ram0 rw initrd=0x01400000,0x1371df console=ttyS0,115200n8 init=/init [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 448MB = 448MB total [ 0.000000] Memory: 444800k/444800k available, 13952k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] DMA : 0xffa00000 - 0xffe00000 ( 4 MB) [ 0.000000] vmalloc : 0xdc800000 - 0xfe000000 ( 536 MB) [ 0.000000] lowmem : 0xc0000000 - 0xdc000000 ( 448 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .init : 0xc0008000 - 0xc0034000 ( 176 kB) [ 0.000000] .text : 0xc0034000 - 0xc0745000 (7236 kB) [ 0.000000] .data : 0xc0746000 - 0xc0780460 ( 234 kB) [ 0.000000] .bss : 0xc0780484 - 0xc087aa50 (1002 kB) [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:128 [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] console [ttyS0] enabled [ 0.162967] Calibrating delay loop... 2420.32 BogoMIPS (lpj=2270747136) [ 0.182977] pid_max: default: 32768 minimum: 301 [ 0.187716] Mount-cache hash table entries: 512 [ 0.192468] CPU: Testing write buffer coherency: ok [ 0.197740] devtmpfs: initialized [ 0.202046] kmalloc buffer env_ptr = 0xdb850000, env_ptr_nand = 0xdb850000 [ 0.208872] call env before sf init [ 0.208891] SPI flash id = 0xc84013 [ 0.212304] SPI flash id = 0xffffff [ 0.215768] call env after sf init, SF_BASE_ADDR=fe002000 [ 0.215889] call IOMAP finish, start read... [ 0.415967] MTD Dev3 isn't valid [ 0.416196] call IOMAP finish, start read... [ 0.617106] 1crc32 = 0x81c9b9d2 , env_ptr->crc = 0x81c9b9d2 [ 0.623798] ## Warning: "wmt.pmc.dbg" not defined [ 0.628823] NET: Registered protocol family 16 [ 0.634219] wmt.plla.divisor = 0x9 [ 0.637549] wmt.pllb.divisor = 0x528 [ 0.641535] L310 cache controller enabled [ 0.645468] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x3e440000, Cache size: 262144 B [ 0.654236] ## Warning: "wmt.pmu.param" not defined [ 0.659609] wmt_pci_init [ 0.662062] PCI: WonderMidia Technology PCI Bridge [ 0.666948] pci 0000:00:01.0: [1106:1359] type 0 class 0x000101 [ 0.666967] pci 0000:00:01.0: reg 10: [io 0xfe008100-0xfe008107] [ 0.666980] pci 0000:00:01.0: reg 14: [io 0xfe008144-0xfe008147] [ 0.666994] pci 0000:00:01.0: reg 20: [io 0xfe008180-0xfe00818f] [ 0.667027] pci 0000:00:02.0: [1106:3106] type 0 class 0x000200 [ 0.667042] pci 0000:00:02.0: reg 10: [io 0xfe004000-0xfe0040ff] [ 0.667054] pci 0000:00:02.0: reg 14: [mem 0xd8004000-0xd80040ff] [ 0.667084] pci 0000:00:04.0: [1106:3104] type 0 class 0x000c03 [ 0.667099] pci 0000:00:04.0: reg 10: [mem 0xd8007900-0xd80079ff] [ 0.667131] pci 0000:00:05.0: [1106:3038] type 0 class 0x000c03 [ 0.667149] pci 0000:00:05.0: reg 20: [io 0xfe007b00-0xfe007b1f] [ 0.667177] pci 0000:00:06.0: [1106:3038] type 0 class 0x000c03 [ 0.667194] pci 0000:00:06.0: reg 20: [io 0xfe008d00-0xfe008d1f] [ 0.667227] PCI: bus0: Fast back to back transfers disabled [ 0.677470] bio: create slab at 0 [ 0.681872] SCSI subsystem initialized [ 0.685669] usbcore: registered new interface driver usbfs [ 0.691126] usbcore: registered new interface driver hub [ 0.696441] usbcore: registered new device driver usb [ 0.701662] Advanced Linux Sound Architecture Driver Version 1.0.24. [ 0.708233] Bluetooth: Core ver 2.16 [ 0.711764] NET: Registered protocol family 31 [ 0.716145] Bluetooth: HCI device and connection manager initialized [ 0.722474] Bluetooth: HCI socket layer initialized [ 0.727325] Bluetooth: L2CAP socket layer initialized [ 0.732357] Bluetooth: SCO socket layer initialized [ 0.737233] detect_wifi_module [ 0.740951] ## Warning: "wmt.wifi.bluetooth.gps" not defined [ 0.746517] have not set uboot enviroment variant:wmt.wifi.bluetooth.gps [ 0.753543] [WMT-MB] Set MB total size 57344 KB [ 0.758022] cfg80211: Calling CRDA to update world regulatory domain [ 0.764585] [WMT-MB] Preparing VIDEO BUFFER (SIZE 57344 kB) ... [ 0.770839] [WMT-MB] MAX MB Area size: Max 4194304 Kb Min 256 Kb [ 0.776764] [WMT-MB] prob /dev/Memory Block major 242, minor 0 [ 0.788830] NET: Registered protocol family 2 [ 0.793186] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.800271] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.807667] TCP bind hash table entries: 16384 (order: 4, 65536 bytes) [ 0.814232] TCP: Hash tables configured (established 16384 bind 16384) [ 0.820669] TCP reno registered [ 0.823788] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.829601] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.836005] NET: Registered protocol family 1 [ 0.840471] RPC: Registered named UNIX socket transport module. [ 0.846308] RPC: Registered udp transport module. [ 0.850985] RPC: Registered tcp transport module. [ 0.855659] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.862129] PCI: CLS 32 bytes, default 32 [ 0.862247] Trying to unpack rootfs image as initramfs... [ 0.966349] Freeing initrd memory: 1244K [ 0.971064] ## Warning: "wmt.cpuidle.param" not defined [ 0.976204] Can not find uboot env wmt.cpuidle.param [ 0.981143] wmt_cpuidle check env failed! [ 0.989773] ashmem: initialized [ 1.001311] NTFS driver 2.1.30 [Flags: R/W]. [ 1.005892] fuse init (API version 7.16) [ 1.010167] yaffs: yaffs built Aug 1 2012 18:39:52 Installing. [ 1.010208] msgmni has been set to 871 [ 1.014589] io scheduler noop registered [ 1.018438] io scheduler deadline registered [ 1.022817] io scheduler cfq registered (default) [ 1.027805] SPI flash id = 0xc84013 [ 1.031218] SPI flash id = 0xffffff [ 1.034802] SF Using builtin partition table [ 1.038990] Creating 6 MTD partitions on "mtdsf device": [ 1.044284] 0x000000000000-0x000000d00000 : "filesystem-SF" [ 1.050487] 0x000000d00000-0x000000f80000 : "kernel-SF" [ 1.056223] 0x000000f80000-0x000000fd0000 : "u-boot-SF" [ 1.061967] 0x000000fd0000-0x000000fe0000 : "u-boot env. cfg. 1-SF" [ 1.068772] 0x000000fe0000-0x000000ff0000 : "u-boot env. cfg. 2-SF" [ 1.075588] 0x000000ff0000-0x000001000000 : "w-load-SF" [ 1.081383] wmt sf controller initial ok [ 1.085401] 1PMNAND_ADDR=0x10a [ 1.088502] nand chip device id = 0x68044a 0xa9000000 [ 1.093514] MTD dev3 size: 0x00010000 "u-boot env. cfg. 1-SF" [ 1.099203] MTD dev4 size: 0x00010000 "u-boot env. cfg. 2-SF" [ 1.301451] crc32 = 0x81c9b9d2 , env_ptr->crc = 0x81c9b9d2 [ 1.503374] crc32 = 0x81c9b9d2 , env_ptr->crc = 0x81c9b9d2 [ 1.509480] ## Warning: "wmt.io.nand" not defined [ 1.514120] MTD dev0 size: 01000000 "logo" [ 1.514129] MTD dev1 size: 01000000 "boot" [ 1.514138] MTD dev2 size: 01000000 "recovery" [ 1.514146] MTD dev3 size: 01000000 "misc" [ 1.514154] MTD dev4 size: 20000000 "system" [ 1.514162] MTD dev5 size: 20000000 "cache" [ 1.514171] MTD dev6 size: 20000000 "data" [ 1.514183] NAND device: Manufacturer ID: 0x2c, Chip ID: 0x68044a (Micron MT29F32G08CBACA) [ 1.522363] Micron Nand Flash Features is 0x00000000 [ 1.527297] PLLB=0x16, spec_clk=0x281e32c8 [ 1.531366] T1=3, clk1=17, div1=9, Thold=2, tREA=40+delay(9) [ 1.537003] T2=2, clk2=26, div2=14, Thold2=2, comp=1 [ 1.541936] Tim1=348160 , Tim2=425984 [ 1.545574] T2 is greater and not use [ 1.549218] T2=1, clk2=49, div2=26, Thold2=1, comp=1 [ 1.554160] Tim1=348160 , Tim2=401408 [ 1.557794] T2 is greater and not use [ 1.561438] nand tadl=0T, divisor set 0x9, NFC_timing=0x2424 [ 1.567076] last_bank_dmaaddr=0x1b120e00 [ 1.570969] oob_col=4236 [ 1.573482] last_bank_col=3724 [ 1.576508] BCH ECC 12 BIT mode [ 1.580398] ## Warning: "wmt.io.nand" not defined [ 1.585013] NAND device: Manufacturer ID: 0x2c, Chip ID: 0x68044a (Micron MT29F32G08CBACA) [ 1.826073] nand flash is not ready [ 1.829469] Reset err, nand device is not ready [ 1.834483] Bad block table found at page 1048320, version 0x01 [ 1.835608] Bad block table found at page 1048064, version 0x01 [ 1.836111] nand_read_bbt: Bad block at 0x000005a00000 [ 1.836119] Bad block at 90 [ 1.838826] nand_read_bbt: Bad block at 0x000005b00000 [ 1.838834] Bad block at 91 [ 1.841667] WMT_nand: uboot no dynamic partitions defined, use default static [ 1.848715] Creating 8 MTD partitions on "WMT.nand": [ 1.853657] 0x000000000000-0x000001000000 : "logo" [ 1.859151] 0x000001000000-0x000002000000 : "boot" [ 1.864549] 0x000002000000-0x000003000000 : "recovery" [ 1.870249] 0x000003000000-0x000004000000 : "misc" [ 1.875589] 0x000004000000-0x000024000000 : "system" [ 1.881196] 0x000024000000-0x000044000000 : "cache" [ 1.886693] 0x000044000000-0x000084000000 : "data" [ 1.892171] 0x000084000000-0x0000ffc00000 : "LocalDisk" [ 1.898190] nand initialised ok [ 1.901361] i2c /dev entries driver [ 1.904807] i2c: wmt algorithm module loaded. [ 1.909244] PORT 0 speed_mode = 1 [ 1.912491] i2c: adding wmt_i2c_adapter0. [ 1.916692] i2c: successfully added bus [ 1.920588] PORT 1 speed_mode = 1 [ 1.923832] i2c: adding wmt_i2c_adapter1. [ 1.927975] i2c: successfully added bus [ 1.931873] PORT 2 speed_mode = 0 [ 1.935117] i2c: adding wmt_i2c_adapter2. [ 1.939256] i2c: successfully added bus [ 1.943006] [wmt_i2c_api_i2c_init] [ 1.946422] i2c i2c-0: WMT-I2C-API: attach_adapter method is deprecated [ 1.952977] i2c i2c-0: Please use another way to instantiate your i2c_client [ 1.960080] i2c i2c-1: WMT-I2C-API: attach_adapter method is deprecated [ 1.966604] i2c i2c-1: Please use another way to instantiate your i2c_client [ 1.973693] i2c i2c-2: WMT-I2C-API: attach_adapter method is deprecated [ 1.980221] i2c i2c-2: Please use another way to instantiate your i2c_client [ 1.987239] [wmt_i2c_api_init] wmt_i2c_api_init. [ 1.992570] ## Warning: "wmt.display.hdmi_audio_inf" not defined [ 1.998944] [VPP] HDMI video mode 0 [ 2.003047] ## Warning: "wmt.gralloc.param" not defined [ 2.008188] [VPP] govrh preinit 1 [ 2.012187] ## Warning: "wmt.display.mb" not defined [ 2.017056] [VPP] alloc base 0x1c800000,13824000 [ 2.021646] [VPP] alloc mb 0x1c800000,fb 4608000,y 4608000 [ 2.027106] [VPP] alloc mb 0x1cc65000,fb 4608000,y 4608000 [ 2.032566] [VPP] alloc mb 0x1d0ca000,fb 4608000,y 4608000 [ 2.038588] display dual : 1 [ 2.041736] display param 0 : 2:2:24:800:480:60 [ 2.046179] boot parm vo 2 opt 2,24, 800x480@60 [ 2.051403] ## Warning: "wmt.display.param2" not defined [ 2.056621] [VOUT] dual display [ 2.059743] *E* {vout_info_add_entry} full [ 2.064534] ## Warning: "wmt.display.regop" not defined [ 2.070388] ## Warning: "wmt.display.tmr" not defined [ 2.076721] [HDMI] HDMI plugout,hotplug 0 [ 2.080677] [LCD] INNOLUX AT707TN83 (id 2,bpp 24) [ 2.085342] [VOUT] info 0,mask 0x2,GOVRH2,800x480@60 [ 2.090268] [VOUT] info 1,mask 0x5,GOVRH,1024x768@60 [ 2.096185] ## Warning: "wmt.mali.param" not defined [ 2.101074] wmt.mali.param = 1:-1:-1:-1 [ 2.130014] maligp: version = 0x0b070101 [ 2.133846] malipp: version = 0xcd070101 [ 2.163925] wmt.ge.param = 1:6:-1:8 [ 2.167442] gefb: framebuffer at 1c100000, mapped to e2800000, using 6144k, total 6144k [ 2.176008] wmt.kernel.animation.addr = 0x1FC00000, 0x1fc00000 map to 0xdca00000 [ 2.184135] ## Warning: "wmt.org.direction" not defined [ 2.189500] wmtfb: framebuffer at 0x1c800000, mapped to 0xdd000000, using 13824000, total 13824000 [ 4.979678] fb1: wmtvfb frame buffer device [ 4.984029] uart.0: ttyS0 at MMIO 0xfe200000 (irq = 32) is a wmt serial [ 4.990756] uart.1: ttyS1 at MMIO 0xfe2b0000 (irq = 33) is a wmt serial [ 4.997460] uart.2: ttyS2 at MMIO 0xfe210000 (irq = 47) is a wmt serial [ 5.004152] uart.3: ttyS3 at MMIO 0xfe2c0000 (irq = 50) is a wmt serial [ 5.010864] WMT Serial driver initialized: ok [ 5.015972] WMT vibrater driver load successfully! [ 5.020694] mknod /dev/wmtgpio c 253 0 [ 5.024664] Enter pwm_init [ 5.028210] [drm] Initialized drm 1.1.0 20060810 [ 5.037040] brd: module loaded [ 5.042161] loop: module loaded [ 5.045390] nbd: registered device at major 43 [ 5.055779] ## Warning: "wmt.modem.viatel.4wire" not defined [ 5.062385] ## Warning: "wmt.ebm.param" not defined [ 5.067238] Linux video capture interface: v2.00 [ 5.071867] usbcore: registered new interface driver uvcvideo [ 5.077529] USB Video Class driver (v1.1.0) [ 5.082378] WMT EVB SPI Controlor Driver OK! [ 5.086627] PPP generic driver version 2.4.2 [ 5.091017] PPP Deflate Compression module registered [ 5.095985] PPP BSD Compression module registered [ 5.100663] NET: Registered protocol family 24 [ 5.105474] VIA Rhine Family Fast Ethernet Adapter Driver Ver. 5.08 [ 5.111658] Copyright (c) 2002 VIA Technologies, Inc. [ 5.117893] ## Warning: "wmt.eth.nophy" not defined [ 5.127991] eth0: VIA Rhine III Fast Ethernet Adapter [ 5.132962] eth0: MAC=00:40:63:31:26:17 IO=0xfe004000 Mem=0xd8004000 IRQ=10 [ 5.140382] usbcore: registered new interface driver asix [ 5.145741] usbcore: registered new interface driver dm9601 [ 5.151295] usbcore: registered new interface driver smsc75xx [ 5.157021] usbcore: registered new interface driver smsc95xx [ 5.162719] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 5.170225] rda_5990_power_ctrl_init begin [ 5.174564] rda_5990_power_ctrl_init end [ 5.178565] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.185045] PCI: enabling device 0000:00:04.0 (0040 -> 0042) [ 5.190682] ehci_hcd 0000:00:04.0: EHCI Host Controller [ 5.196049] ehci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 1 [ 5.204554] ## Warning: "wmt.pmc.param" not defined [ 5.209371] ehci_hcd 0000:00:04.0: irq 26, io mem 0xd8007900 [ 5.223358] ehci_hcd 0000:00:04.0: USB 0.0 started, EHCI 1.00 [ 5.229462] hub 1-0:1.0: USB hub found [ 5.233143] hub 1-0:1.0: 4 ports detected [ 5.238052] ## Warning: "wmt.pmc.param" not defined [ 5.242847] uhci_hcd: USB Universal Host Controller Interface driver [ 5.249291] PCI: enabling device 0000:00:05.0 (0000 -> 0001) [ 5.254885] uhci_hcd 0000:00:05.0: UHCI Host Controller [ 5.260255] uhci_hcd 0000:00:05.0: new USB bus registered, assigned bus number 2 [ 5.267609] uhci_hcd 0000:00:05.0: irq 26, io base 0xfe007b00 [ 5.273872] hub 2-0:1.0: USB hub found [ 5.277551] hub 2-0:1.0: 2 ports detected [ 5.281711] PCI: enabling device 0000:00:06.0 (0000 -> 0001) [ 5.287306] uhci_hcd 0000:00:06.0: UHCI Host Controller [ 5.292677] uhci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 3 [ 5.300039] uhci_hcd 0000:00:06.0: irq 26, io base 0xfe008d00 [ 5.306283] hub 3-0:1.0: USB hub found [ 5.309962] hub 3-0:1.0: 2 ports detected [ 5.314149] Initializing USB Mass Storage driver... [ 5.319048] usbcore: registered new interface driver usb-storage [ 5.324981] USB Mass Storage support registered. [ 5.329669] usbcore: registered new interface driver usbserial [ 5.335416] usbserial: USB Serial Driver core [ 5.339852] USB Serial support registered for cp210x [ 5.344835] usbcore: registered new interface driver cp210x [ 5.350324] cp210x: v0.09:Silicon Labs CP210x RS232 serial adaptor driver [ 5.357118] USB Serial support registered for pl2303 [ 5.362078] usbcore: registered new interface driver pl2303 [ 5.367569] pl2303: Prolific PL2303 USB to serial adaptor driver [ 5.373551] udc: VIA UDC driver, version: 3 December 2007 (dma) [ 5.380102] udc: pullup_disable() [ 5.383327] mount_thread [ 5.385880] udc: wmt_udc_probe - request_irq(0x1A) pass! [ 5.391339] udc: gri wmt_pullup() [ 5.394572] udc: pullup_disable() [ 5.399087] android_usb gadget: Mass Storage Function, version: 2009/09/11 [ 5.405897] android_usb gadget: Number of LUNs=1 [ 5.410473] lun0: LUN: removable file: (no medium) [ 5.415865] android_usb gadget: android_usb ready [ 5.420501] bind to android_usb --> 0 [ 5.424133] rawbulk functions init. [ 5.427688] kevin chagnge dtr for 200 for cts, disable usb est bypass [ 5.435416] mousedev: PS/2 mouse device common for all mice [ 5.441206] rmtctl_init [ 5.444293] ## Warning: "wmt.io.rmtctl" not defined [ 5.449417] input: rmtctl as /devices/virtual/input/input0 [ 5.455039] WonderMedia rmtctl driver v0.98 initialized: ok [ 5.461113] using rtc device, wmt-rtc, for alarms [ 5.465594] wmt-rtc wmt-rtc.0: rtc core: registered wmt-rtc as rtc0 [ 5.471980] WMT Real Time Clock driver v0.54 initialized ok [ 5.477547] Bow: wmt_batt_initPara [ 5.481795] ## Warning: "wmt.io.batt.fullmax" not defined [ 5.488586] ## Warning: "wmt.io.batt.chargetype" not defined [ 5.497091] wmt_battery_probe done. [ 5.501346] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com [ 5.509802] cpuidle: using governor ladder [ 5.514203] wmt.sd0.param = 1:0 [ 5.517624] WMT ATSMB (AHB To SD/MMC Bus) controller registered! [ 5.524144] wmt.sd1.param = 0:0 [ 5.527549] wmt.sd2.param = 0:0 [ 5.531309] ## Warning: "wmt.sd3.param" not defined [ 5.536095] Default wmt.sd3.param = 0:0 [ 5.540633] ## Warning: "wmt.init.rc" not defined [ 5.545242] do not have set uboot enviroment: wmt.init.rc [ 5.550665] usb 1-2: new high speed USB device number 2 using ehci_hcd [ 5.557361] Registered led device: lcd-backlight [ 5.558090] ## Warning: "wmt.display.brightrange" not defined [ 5.564470] usbcore: registered new interface driver usbhid [ 5.569967] usbhid: USB HID core driver [ 5.574781] ## Warning: "wmt.logcat.param" not defined [ 5.579843] log enable:FF, setting:FF [ 5.583615] logger: created 256K log 'log_main' [ 5.588174] logger: created 256K log 'log_events' [ 5.592887] logger: created 64K log 'log_radio' [ 5.599348] GPS: mt3326_gps_power: Switching GPS device on [ 5.604764] GPS: mt3326_gps_power: ignore power control: 1 [ 5.610209] GPS: mt3326_gps_probe: Registering chardev [ 5.615324] GPS: mt3326_gps_probe: major: 247, minor: 0 [ 5.621011] GPS: mt3326_gps_probe: Done [ 5.625965] ## Warning: "wmt.audio.pdm" not defined [ 5.632933] WMT_SOC: dai_name=i2s, codec_name=vt1603 [ 5.638534] ## Warning: "wmt.audio.rate" not defined [ 5.644432] ## Warning: "wmt.audio.pdm" not defined [ 5.649231] wmt_pdm_init: pcm_clk_src=66000 [ 5.649236] [ 5.655118] VT1602: vt1602 string not found [ 5.659529] wmt.audio.i2s = vt1603:0 [ 5.664478] WMT_SOC: create WMT-HWDEP 0 success [ 5.670127] asoc: VT1603 <-> wmt-i2s.0 mapping ok [ 5.675613] buf_area = ffddc000, buf_addr = 1b278000buf_area = ffd1c000, buf_addr = 1b27c000 [ 5.684544] asoc: HWDAC <-> wmt-pdm.0 mapping ok [ 5.690699] mount_thread [ 5.695487] hub 1-2:1.0: USB hub found [ 5.699974] ALSA device list: [ 5.702871] #0: WMT_SOC [ 5.706175] ## Warning: "wmt.oprofile.param" not defined [ 5.711398] default disable oprofile [ 5.717849] hub 1-2:1.0: 4 ports detected [ 5.723388] nf_conntrack version 0.5.0 (6969 buckets, 27876 max) [ 5.730982] NF_TPROXY: Transparent proxy support initialized, version 4.1.0 [ 5.738437] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. [ 5.746718] ## Warning: "wmt.iptables.disable" not defined [ 5.752484] ip_tables: (C) 2000-2006 Netfilter Core Team [ 5.758629] TCP cubic registered [ 5.763598] NET: Registered protocol family 10 [ 5.769142] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 5.774497] IPv6 over IPv4 tunneling driver [ 5.779007] NET: Registered protocol family 17 [ 5.783489] Bluetooth: RFCOMM TTY layer initialized [ 5.788336] Bluetooth: RFCOMM socket layer initialized [ 5.793401] Bluetooth: RFCOMM ver 1.11 [ 5.797120] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 5.802404] Bluetooth: BNEP filters: protocol multicast [ 5.807614] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 5.813693] lib80211: common routines for IEEE802.11 drivers [ 5.819284] lib80211_crypt: registered algorithm 'NULL' [ 5.819294] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 3 [ 5.828619] ThumbEE CPU extension supported. [ 5.832810] Registering SWP/SWPB emulation handler [ 5.837738] input: kpadPower as /devices/virtual/input/input1 [ 5.844131] [wmt_pm_init] id = 0x0, act = 0x1, bitmap = 0x6, ctl = 0xfe110042, oc = 0xfe110082, od = 0xfe1100c2 [ 5.854857] ## Warning: "wmt.pmc.param" not defined [ 5.859654] [wmt_pm_init] var define var_wake_en=1 var_wake_param=408001 [ 5.866495] [wmt_pm_init] battery_used = 3 [ 5.871000] PMC: WonderMedia Power Management driver [ 5.875920] PMC: Power button is configured as soft power [ 5.881655] [wmt_pm_init] power_on = 100 resume = 100 power_up = 100 [ 5.888938] Mali DRM initialize, driver name: mali_drm, version 2.1 [ 5.895406] [drm] Initialized mali_drm 2.1.1 20101111 on minor 0 [ 5.902229] ## Warning: "wmt.io.touch" not defined [ 5.907690] ## Warning: "wmt.io.touch" not defined [ 5.912393] Read wmt.io.touch Failed. [ 5.916427] wmt-rtc wmt-rtc.0: setting system clock to 2014-02-01 17:30:05 UTC (1391275805) [ 5.926491] ## Warning: "wmt.io.touch" not defined [ 5.935503] Freeing init memory: 176K [ 5.946375] ## Warning: "wmt.init.rc" not defined [ 5.951571] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead. [ 5.968677] SD0 Host Clock 375000Hz [ 6.043892] yaffs: dev is 32505866 name is "mtdblock10" rw [ 6.049304] yaffs: passed flags "" [ 6.052726] yaffs: yaffs: Attempting MTD mount of 31.10,"mtdblock10" [ 6.073419] usb 3-1: new low speed USB device number 2 using uhci_hcd [ 6.099951] yaffs: yaffs_read_super: is_checkpointed 1 [ 6.100272] yaffs: dev is 32505868 name is "mtdblock12" rw [ 6.105689] yaffs: passed flags "" [ 6.109051] yaffs: yaffs: Attempting MTD mount of 31.12,"mtdblock12" [ 6.151208] yaffs: yaffs_read_super: is_checkpointed 1 [ 6.151387] yaffs: dev is 32505867 name is "mtdblock11" rw [ 6.156809] yaffs: passed flags "" [ 6.160166] yaffs: yaffs: Attempting MTD mount of 31.11,"mtdblock11" [ 6.163982] yaffs: yaffs_read_super: is_checkpointed 1 [ 6.188978] UMP: UMP device driver loaded [ 6.219454] Mali: Mali device driver loaded [ 6.252709] [wmt-vd] WonderMedia HW decoder driver inited [ 6.278582] [wmt-lock] init ok, major=242, minor=1 [ 6.287947] [wmt-vd] jdec Request IRQ 64 Ok. [ 6.292175] [wmt-vd] jdec registered major 236 minor 1 [ 6.299004] [wmt-vd] mpeg2 registered major 236 minor 2 [ 6.305832] [wmt-vd] mpeg4 registered major 236 minor 3 [ 6.312746] [wmt-vd] divx registered major 236 minor 4 [ 6.319775] [wmt-vd] h263 registered major 236 minor 8 [ 6.326812] [wmt-vd] h264 registered major 236 minor 5 [ 6.333229] [wmt-vd] vc1 registered major 236 minor 7 [ 6.339910] [*ERR*]:RV is not supported! [ 6.355779] [wmt-vd] vpx Request IRQ 88 Ok. [ 6.359897] [wmt-vd] vpx registered major 236 minor 9 [ 6.368354] [wmt-ve] videoencoder_init: create video encoder proc [ 6.368366] start register videoencoder_driver [ 6.373515] input: USB Keyboard as /devices/pci0000:00/0000:00:06.0/usb3/3-1/3-1:1.0/input/input2 [ 6.382684] *****NOW start videoencoder probe function!!***** [ 6.388592] [wmt-ve] veinfo.prdt_virt =0xffce0000,veinfo.prdt_phys =0x1ad60000 [ 6.395738] [wmt-ve] prob /dev/wmt-ve major 236, minor 0, prdt ffce0000/1ad60000, size 100 KB [ 6.404905] generic-usb 0003:04D9:2BA0.0001: input,hidraw0: USB HID v1.10 Keyboard [USB Keyboard] on usb-0000:00:06.0-1/input0 [ 6.416777] register videoencoder_driver done [ 6.421083] [wmt-ve] WonderMedia HW encoder driver inited [ 6.429677] [wmt-ve] encoder->irq_num = 87,encoder->isr = 0xbf0a5870 [ 6.439533] [wmt-ve] wmt-h264enc Request IRQ 87 Ok. [ 6.444331] [wmt-ve] wmt-h264enc registered major 236 minor 18 [ 6.466796] ## Warning: "wmt.cmos.i2cindex" not defined [ 6.472153] wmt_vid_i2c_probe() [ 6.477565] WonderMedia CMOS camera register OK [ 6.552132] input: USB Keyboard as /devices/pci0000:00/0000:00:06.0/usb3/3-1/3-1:1.1/input/input3 [ 6.564738] generic-usb 0003:04D9:2BA0.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [USB Keyboard] on usb-0000:00:06.0-1/input1 [ 6.648753] init: try to config ril modem type... [ 6.653277] init: ril is not enable... rx_thresh : 18 ([S&F]=0x38, 64DW=0x18) [ 6.663973] eth0: failed to detect cable link [ 6.670149] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6.769552] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery' [ 6.895478] init: cannot find '/system/etc/init.sh', disabling 'system_init' [ 6.922635] android_usb: already disabled [ 6.928775] mtp_bind_config [ 6.931516] mtp mtp_function_bind endpoint 1 in add=80 [ 6.936697] mtp mtp_function_bind endpoint 1 out add=0 [ 6.941884] mtp mtp_function_bind endpoint 1 int add=80 [ 6.947174] usb_ep_autoconfig try to find ep1in-bulk [ 6.952251] usb_ep_autoconfig found ep1in-bulk [ 6.956707] usb_ep_autoconfig try to find ep2out-bulk [ 6.961817] usb_ep_autoconfig found ep2out-bulk [ 6.966409] usb_ep_autoconfig try to find ep3in-int [ 6.971357] usb_ep_autoconfig found ep3in-int [ 6.975771] mtp usb_ep_autoconfig for mtp ep_intr got ep3in-int [ 6.981753] mtp usb_ep_autoconfig endpoint int add=83 [ 6.988878] mtp usb_ep_autoconfig endpoint 2 int add=83 [ 6.994120] mtp mtp_function_bind endpoint in add=81 [ 6.999129] mtp mtp_function_bind endpoint out add=2 [ 7.004164] mtp mtp_function_bind endpoint int add=83 [ 7.009266] udc: gri wmt_pullup() [ 7.012557] udc: gri pullup_enable() [ 7.414434] ## Warning: "wmt.gpo.modem2g" not defined [ 7.468489] ## Warning: "rootdev" not defined [ 8.109098] [dump_kpad_devinfo]: =================================================== [ 8.116872] [dump_kpad_devinfo]: kpad id:baseboard devnum:1 [ 8.122355] [dump_kpad_devinfo]: dev[0] type:rc_1 [ 8.127364] [dump_kpad_devinfo]: [ 8.130590] [dump_kpad_devinfo]: key number:5 [ 8.135074] [dump_kpad_devinfo]: key0:9e(158), [ 8.139345] [dump_kpad_devinfo]: key1:8b(139), [ 8.143854] [dump_kpad_devinfo]: key2:73(115), [ 8.148360] [dump_kpad_devinfo]: key3:72(114), [ 8.152967] [dump_kpad_devinfo]: key4:66(102), [ 8.157412] [dump_kpad_devinfo]: [ 8.160931] [dump_kpad_devinfo]: longkey num:0 [ 8.165381] [dump_kpad_devinfo]: =================================================== [ 8.195228] input: keypad as /devices/virtual/input/input4 [ 8.323393] usbcore: registered new interface driver cdc_acm [ 8.329060] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 8.429475] USB Serial support registered for GSM modem (1-port) [ 8.436255] usbcore: registered new interface driver option [ 8.441855] option: v0.7.2:USB Driver for GSM modems [ 8.675283] fan GEIO_STOP_LOGO [ 8.678272] [Boot Animation] animation_stop [ 8.773662] ## Warning: "wmt.gralloc.param" not defined [ 8.930785] [VPP] rx user pid 0x49 [ 10.514426] ## Warning: "wmt.gpo.modem2g" not defined [ 10.707054] [INFO] VPU Firmware Version => [ 10.707060] product : | version : 0002.0000.00000007 [ 10.707066] [ 10.721383] [INFO] msvd_dec_open(h264) bf057acc (index 0 inUse 1) [ 10.773377] [INFO] Profile 0x4d Level 0x15 Interlace AspectRateio 0x0 [ 10.869317] [INFO] VPU Firmware Version => [ 10.869323] product : | version : 0002.0000.00000007 [ 10.869329] [ 10.883644] [INFO] msvd_dec_open(h264) bf057acc (index 0 inUse 1) [ 10.892416] [INFO] Profile 0x4d Level 0x15 Interlace AspectRateio 0x0 [ 12.586885] ## Warning: "wmt.gpo.resetmodem" not defined [ 15.614263] ## Warning: "wmt.gpo.resetmodem" not defined [ 17.695352] warning: `zygote' uses 32-bit capabilities (legacy support in use) [ 24.560136] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 0 [ 24.565824] skip adjust backlight at the first time [ 24.585106] request_suspend_state: wakeup (3->0) at 24959066670 (2014-02-01 17:30:24.171741003 UTC) [ 24.596987] [lcd_brightness]pwm_no = 0 pwm_period = 1000 b= 174 [ 24.998203] rx_thresh : 18 ([S&F]=0x38, 64DW=0x18) [ 25.004750] eth0: failed to detect cable link [ 25.016842] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 25.133289] wifi_power_ctrl 1 [ 25.137010] ## Warning: "wmt.gpo.wifi" not defined [ 25.141710] wifi excute_gpio_op 1 [ 25.193509] acc_open [ 25.195624] acc_release [ 25.420084] usb 1-4: new high speed USB device number 4 using ehci_hcd [ 26.329276] usbcore: registered new interface driver rtl8192cu [ 31.833933] ADDRCONF(NETDEV_UP): ra0: link is not ready [ 36.419574] yaffs: dev is 32505869 name is "mtdblock13" rw [ 36.425101] yaffs: passed flags "" [ 36.428418] yaffs: yaffs: Attempting MTD mount of 31.13,"mtdblock13" [ 36.487902] yaffs: yaffs_read_super: is_checkpointed 1 [ 37.386413] binder: release proc 145, transaction 90, not freed [ 37.386426] binder: release proc 145, transaction 3463, not freed